International Organization for Standardization in the context of JBIG

This is a list of countries and dependencies by population. It includes sovereign states, inhabited dependent territories and, in some cases, constituent countries of sovereign states, with inclusion within the list being primarily based on the ISO standard ISO 3166-1. For instance, the United Kingdom is considered a single entity, while the constituent countries of the Kingdom of the Netherlands are considered separately. In addition, this list includes certain states with limited recognition not found in ISO 3166-1. Also given in a percentage is each country's population compared with the world population, which the United Nations estimated at 8.232 billion as of 2025.

Arabic is a Central Semitic language of the Afroasiatic language family spoken primarily in the Arab world. The International Organization for Standardization (ISO) assigns language codes to 32 varieties of Arabic, including its standard form of Literary Arabic, known as Modern Standard Arabic, which is derived from Classical Arabic. This distinction exists primarily among Western linguists; Arabic speakers themselves generally do not distinguish between Modern Standard Arabic and Classical Arabic, but rather refer to both as al-ʿarabiyyatu l-fuṣḥā (اَلعَرَبِيَّةُ ٱلْفُصْحَىٰ "the eloquent Arabic") or simply al-fuṣḥā (اَلْفُصْحَىٰ).

Arabic is the third most widespread official language after English and French, one of six official languages of the United Nations, and the liturgical language of Islam. Arabic is widely taught in schools and universities around the world and is used to varying degrees in workplaces, governments and the media. During the Middle Ages, Arabic was a major vehicle of culture and learning, especially in science, mathematics and philosophy. As a result, many European languages have borrowed words from it. Arabic influence, mainly in vocabulary, is seen in European languages (mainly Spanish and to a lesser extent Portuguese, Catalan, and Sicilian) owing to the proximity of Europe and the long-lasting Arabic cultural and linguistic presence, mainly in Southern Iberia, during the Al-Andalus era. Maltese is a Semitic language developed from a dialect of Arabic and written in the Latin alphabet. The Balkan languages, including Albanian, Greek, Serbo-Croatian, and Bulgarian, have also acquired many words of Arabic origin, mainly through direct contact with Ottoman Turkish.

Paperboard is a thick paper-based material. While there is no rigid differentiation between paper and paperboard, paperboard is generally thicker (usually over 0.30 mm, 0.012 in, or 12 points) than paper and has certain superior attributes such as foldability and rigidity. According to ISO standards, paperboard is a paper with a grammage above 250 g/m, but there are exceptions. Paperboard can be single- or multi-ply.

Paperboard can be easily cut and formed, is lightweight, and because it is strong, is used in packaging. Another end-use is high quality graphic printing, such as book and magazine covers or postcards. Paperboard is also used in fine arts for creating sculptures.

ISO 3166-1 (Codes for the representation of names of countries and their subdivisions – Part 1: Country code) is a standard defining codes for the names of countries, dependent territories, and special areas of geographical interest. It is the first part of the ISO 3166 standard published by the International Organization for Standardization.

It defines three sets of country codes:

The following is a list of countries and dependencies ranked by population density, sorted by inhabitants per square kilometre or square mile. The list includes sovereign states and self-governing dependent territories based upon the ISO standard ISO 3166-1. The list also includes unrecognized but de facto independent countries. The figures in the table are based on areas including internal bodies of water such as bays, lakes, reservoirs and rivers. The list does not include entities not on ISO 3166-1, except for states with limited recognition. Thus constituent countries that are not included on ISO 3166-1, and other entities not on ISO 3166-1 such as the European Union, are not included.

Unless otherwise noted, areas and populations are sourced from the United Nations World Population Prospects, which uses the latest censuses and official figures, as well as figures from the Food and Agriculture Organization, an agency of the UN. Data is current as of 2025.

ISO 3166 is a standard published by the International Organization for Standardization (ISO) that defines codes for the names of countries, dependent territories, special areas of geographical interest, and their principal subdivisions (e.g., provinces or states). The official name of the standard is Codes for the representation of names of countries and their subdivisions.

A vehicle (from Latin vehiculum) is a machine designed for self-propulsion, usually to transport people, cargo, or both. The term "vehicle" typically refers to ground transport vehicles such as human-powered land vehicles (e.g. bicycles, tricycles, velomobiles), animal-powered transports (e.g. horse-drawn carriages/wagons, ox carts, dog sleds), motor vehicles (e.g. motorcycles, cars, trucks, buses, mobility scooters) and railed vehicles (trains, trams and monorails), but more broadly also includes cable transport (cable cars and elevators), watercraft (ships, boats and underwater vehicles), amphibious vehicles (e.g. screw-propelled vehicles, hovercraft, seaplanes), aircraft (airplanes, helicopters, gliders and aerostats) and space vehicles (spacecraft, spaceplanes and launch vehicles).

This article primarily concerns the more ubiquitous land vehicles, which can be broadly classified by the type of contact interface with the ground: wheels, tracks, rails or skis, as well as the non-contact technologies such as maglev. ISO 3833-1977 is the international standard for road vehicle types, terms and definitions.

A warehouse is a building for storing goods. Warehouses are used by manufacturers, importers, exporters, wholesalers, transport businesses, customs, etc. They are usually large plain buildings in industrial parks on the outskirts of cities, towns, or villages.

Warehouses usually have loading docks to load and unload goods from trucks. Sometimes warehouses are designed for the loading and unloading of goods directly from railways, airports, or seaports. They often have cranes and forklifts for moving goods, which are usually placed on ISO standard pallets and then loaded into pallet racks. Stored goods can include any raw materials, packing materials, spare parts, components, or finished goods associated with agriculture, manufacturing, and production.

Risk management is the identification, evaluation, and prioritization of risks, followed by the minimization, monitoring, and control of the impact or probability of those risks occurring. Risks can come from various sources (i.e, threats) including uncertainty in international markets, political instability, dangers of project failures (at any phase in design, development, production, or sustaining of life-cycles), legal liabilities, credit risk, accidents, natural causes and disasters, deliberate attack from an adversary, or events of uncertain or unpredictable root-cause. Retail traders also apply risk management by using fixed percentage position sizing and risk-to-reward frameworks to avoid large drawdowns and support consistent decision-making under pressure.

Two types of events are analyzed in risk management: risks and opportunities. Negative events can be classified as risks while positive events are classified as opportunities. Risk management standards have been developed by various institutions, including the Project Management Institute, the National Institute of Standards and Technology, actuarial societies, and International Organization for Standardization. Methods, definitions and goals vary widely according to whether the risk management method is in the context of project management, security, engineering, industrial processes, financial portfolios, actuarial assessments, or public health and safety. Certain risk management standards have been criticized for having no measurable improvement on risk, whereas the confidence in estimates and decisions seems to increase.

ISO 4217 is a standard published by the International Organization for Standardization (ISO) that defines alpha codes and numeric codes for the representation of currencies and provides information about the relationships between individual currencies and their minor units. This data is published in three tables:

• Table A.1 – Current currency & funds code list
• Table A.2 – Current funds codes
• Table A.3 – List of codes for historic denominations of currencies & funds

The first edition of ISO 4217 was published in 1978. The tables, history and ongoing discussion are maintained by SIX Group on behalf of ISO and the Swiss Association for Standardization.

The United States Minor Outlying Islands is a statistical designation applying to the minor outlying islands and groups of islands that comprise eight United States insular areas and territories in the Pacific Ocean (Baker Island, Howland Island, Jarvis Island, Johnston Atoll, Kingman Reef, Midway Atoll, Palmyra Atoll, and Wake Island) and one in the Caribbean Sea (Navassa Island).

It is defined by the International Organization for Standardization's ISO 3166-1 code. The entry code is ISO 3166-2:UM.

ISO 639-1:2002, Codes for the representation of names of languages—Part 1: Alpha-2 code, is the first part of the ISO 639 series of international standards for language codes. Part 1 covers the registration of "set 1" two-letter codes. There are 183 two-letter codes registered as of June 2021. The registered codes cover the world's major languages.

Some languages do not have the ISO 639-1 codes because the standard was initially designed to represent major and primary national languages with well-established terminologies and lexicography. The ISO 639-1 is more restrictive than other ISO 639 standards, such as ISO 639-2 as well as ISO 639-3, which cover a wider range of languages and variations.

ISO 639-3:2007, Codes for the representation of names of languages – Part 3: Alpha-3 code for comprehensive coverage of languages, is an international standard for language codes in the ISO 639 series. It defines three-letter codes for identifying languages. The standard was published by International Organization for Standardization (ISO) on 1 February 2007.

As of 2023, this edition of the standard has been officially withdrawn and replaced by ISO 639:2023.

Containerization is a system of intermodal freight transport using intermodal containers (also called shipping containers, or ISO containers). Containerization, also referred as container stuffing or container loading, is the process of unitization of cargoes in exports. Containerization is the predominant form of unitization of export cargoes today, as opposed to other systems such as the barge system or palletization. The containers have standardized dimensions. They can be loaded and unloaded, stacked, transported efficiently over long distances, and transferred from one mode of transport to another—container ships, rail transport flatcars, and semi-trailer trucks—without being opened. The handling system is mechanized so that all handling is done with cranes and special forklift trucks. All containers are numbered and tracked using computerized systems.

Containerization originated several centuries ago but was not well developed or widely applied until after World War II, when it dramatically reduced the costs of transport, supported the post-war boom in international trade, and was a major element in globalization. Containerization eliminated manual sorting of most shipments and the need for dock front warehouses, while displacing many thousands of dock workers who formerly simply handled break bulk cargo. Containerization reduced congestion in ports, significantly shortened shipping time, and reduced losses from damage and theft.

Munster (Irish: an Mhumhain [ə ˈwuːnʲ] or Cúige Mumhan [ˌkuːɟə ˈmˠuːnˠ]) is the largest of the four provinces of Ireland, located in the south west of the island. In early Ireland, the Kingdom of Munster was one of the kingdoms of Gaelic Ireland ruled by a "king of over-kings" (Irish: rí ruirech). Following the Norman invasion of Ireland, the ancient kingdoms were shired into counties for administrative and judicial purposes. In later centuries, local government legislation has seen further sub-division of the historic counties.

Munster has no official function for local government purposes. For the purposes of the ISO, the province is listed as one of the provincial sub-divisions of the State (ISO 3166-2:IE) and coded as "IE-M". Munster covers an area of 24,675 km (9,527 sq mi). Its population was 1,373,346 in 2022, with Cork being the largest city. Other significant urban centres in the province include Limerick and Waterford.

ISO/TC 279 is a technical committee of the International Organization for Standardization (ISO). Its purpose is to develop, maintain and promote standards in the field of innovation management.

The first plenary meeting of ISO/TC 279 was held in Paris on 4 to 5 December 2013, under the leadership of its first chairperson and founder, Alice de Casanove of Airbus Defence and Space, (mandate 2013-2021). ISO/TC279 oversees the ISO 56000 series (temporarily numbered ISO 50500 series).