Mode of transport in the context of "Route planning"

Transport (in British English) or transportation (in American English) is the intentional movement of humans, animals, and goods from one location to another. Modes of transport include air, land (rail and road), water, cable, pipelines, and space. The field can be divided into infrastructure, vehicles, and operations. Transport enables human trade, which is essential for the development of civilizations.

Transport infrastructure consists of fixed installations, including roads, railways, airways, waterways, canals, and pipelines, as well as terminals such as airports, railway stations, bus stations, warehouses, trucking terminals, refueling depots (including fuel docks and fuel stations), and seaports. Terminals may be used both for the interchange of passengers and cargo and for maintenance.

Travel is the movement of people between distant geographical locations. Travel can be done by foot, bicycle, automobile, train, boat, bus, airplane, ship or other means, with or without luggage, and can be one way or round trip. Travel can also include relatively short stays between successive movements, as in the case of tourism.

A bicycle, also called a pedal cycle, bike, push-bike or cycle, is a human-powered or motor-assisted, pedal-driven, single-track vehicle, with two wheels attached to a frame, one behind the other. A bicycle rider is called a cyclist, or bicyclist.

The bicycle was introduced in the 19th century in Europe. By the early 21st century, there were more than 1 billion bicycles. Bicycles are the principal means of transport in many regions. They also provide a popular form of recreation, and have been adapted for use as children's toys. Bicycles are used for fitness, military and police applications, courier services, bicycle racing, and artistic cycling.

Containerization is a system of intermodal freight transport using intermodal containers (also called shipping containers, or ISO containers). Containerization, also referred as container stuffing or container loading, is the process of unitization of cargoes in exports. Containerization is the predominant form of unitization of export cargoes today, as opposed to other systems such as the barge system or palletization. The containers have standardized dimensions. They can be loaded and unloaded, stacked, transported efficiently over long distances, and transferred from one mode of transport to another—container ships, rail transport flatcars, and semi-trailer trucks—without being opened. The handling system is mechanized so that all handling is done with cranes and special forklift trucks. All containers are numbered and tracked using computerized systems.

Containerization originated several centuries ago but was not well developed or widely applied until after World War II, when it dramatically reduced the costs of transport, supported the post-war boom in international trade, and was a major element in globalization. Containerization eliminated manual sorting of most shipments and the need for dock front warehouses, while displacing many thousands of dock workers who formerly simply handled break bulk cargo. Containerization reduced congestion in ports, significantly shortened shipping time, and reduced losses from damage and theft.

A freight rate (historically and in ship chartering simply freight) is a price at which a certain cargo is delivered from one point to another. The price depends on the form of the cargo, the mode of transport (truck, ship, train, aircraft), the weight of the cargo, and the distance to the delivery destination. Many shipping services, especially air carriers, use dimensional weight for calculating the price, which takes into account both weight and volume of the cargo.

For example, bulk coal long-distance rates in America are approximately 1 cent/ton-mile. So a 100 car train, each carrying 100 tons, over a distance of 1000 miles, would cost $100,000. On the other hand, Intermodal container shipping rates depend heavily on the route taken over the weight of the cargo, just as long as the container weight does not exceed the maximum lading capacity. Prices can vary between $300-$10,000 per Twenty foot equivalent unit (TEU) depending on the supply and demand of a given route.

An intermodal container, often called a shipping container, or a freight container, (or simply "container") is a large metal crate designed and built for intermodal freight transport, meaning these containers can be used across different modes of transport – such as from ships to trains to trucks – without unloading and reloading their cargo. Intermodal containers are primarily used to store and transport materials and products efficiently and securely in the global containerized intermodal freight transport system, but smaller numbers are in regional use as well. It is like a boxcar that does not have wheels. Based on size alone, up to 95% of intermodal containers comply with ISO standards, and can officially be called ISO containers. These containers are known by many names: cargo container, sea container, ocean container, container van or sea van, sea can or C can, or MILVAN, or SEAVAN. The term CONEX (Box) is a technically incorrect carry-over usage of the name of an important predecessor of the ISO containers: the much smaller steel CONEX boxes used by the U.S. Army.

Intermodal containers exist in many types and standardized sizes, but 90 percent of the global container fleet are "dry freight" or "general purpose" containers: durable closed rectangular boxes, made of rust-retardant weathering steel; almost all 8 feet (2.4 m) wide, and of either 20 or 40 feet (6.1 or 12.2 m) standard length, as defined by International Organization for Standardization (ISO) standard 668:2020. The worldwide standard heights are 8 feet 6 inches (2.6 m) and 9 feet 6 inches (2.9 m) – the latter are known as High Cube or Hi-Cube (HC or HQ) containers. Depending on the source, these containers may be termed TEUs (twenty-foot equivalent units), reflecting the 20- or 40-foot dimensions.

A share taxi, shared taxi, taxibus, or jitney or dollar van in the US, marshrutka in former Soviet countries, or a minibus in European countries and Turkey, is a mode of transport which falls between a taxicab and a bus. Share taxis, when not fully formalised, are a form of paratransit. They are vehicles for hire and are typically smaller than buses. Share taxis usually take passengers on a fixed or semi-fixed route without timetables, sometimes only departing when all seats are filled. They may stop anywhere to pick up or drop off their passengers. They are most common in developing countries and inner cities.

The vehicles used as share taxis range from four-seat cars to minibuses, midibuses, covered pickup trucks, station wagons, and trucks. Certain vehicle types may be better-suited than others. They are often owner-operated.

A transport hub is a place where passengers and cargo are exchanged between vehicles and/or between transport modes. Public transport hubs include railway stations, rapid transit stations, bus stops, tram stops, airports, and ferry slips. Freight hubs include classification yards, airports, seaports, and truck terminals, or combinations of these. For private transport by car, the parking lot functions as an unimodal hub.

Cycling is the second-most common mode of transport in the Netherlands, with 36% of Dutch people listing the bicycle as their most frequent way of getting around on a typical day, as opposed to the car (45%) and public transport (11%). Cycling has a modal share of 27% of all trips (urban and rural) nationwide. In cities this is even higher, such as Amsterdam which has 38%, and Zwolle 46%. This high frequency of bicycle travel is enabled by excellent cycling infrastructure such as cycle paths, cycle tracks, protected intersections, ample bicycle parking and by making cycling routes shorter and more direct (and therefore usually quicker) than car routes.

In the countryside, an increasing number of routes link the Netherlands' villages, towns, and cities. Some of these paths are part of the Dutch National Cycle Network, a system of routes for bicycle tourism that reaches every corner of the nation.

Multimodal transport (also known as combined transport) is the transportation of goods under a single contract, but performed with at least two different modes of transport; the carrier is liable (in a legal sense) for the entire carriage, even though it is performed by several different modes of transport (by rail, sea and road, for example). The carrier does not have to possess all the means of transport, and in practice usually does not; the carriage is often performed by sub-carriers (referred to in legal language as "actual carriers"). The carrier responsible for the entire carriage is referred to as a multimodal transport operator, or MTO.

Article 1.1. of the United Nations Convention on International Multimodal Transport of Goods (Geneva, 24 May 1980) (which will only enter into force 12 months after 30 countries ratify; as of May 2019, only 6 countries have ratified the treaty) defines multimodal transport as follows: "'International multimodal transport' means the carriage of goods by at least two different modes of transport on the basis of a multimodal transport contract from a place in one country at which the goods are taken in charge by the multimodal transport operator to a place designated for delivery situated in a different country".

Intermodal passenger transport, also called mixed-mode commuting, involves using two or more modes of transportation in a journey. Mixed-mode commuting is often used to combine the strengths (and offset the weaknesses) of various transportation options. A major goal of modern intermodal passenger transport is to reduce dependence on the automobile as the major mode of ground transportation and increase use of public transport. To assist the traveller, various intermodal journey planners such as Rome2rio and Google Transit have been devised to help travellers plan and schedule their journey.

Mixed-mode commuting often centers on a form of rapid transit, such as regional rail, which has high speed but limited coverage, to which low-speed options (i.e. bus, tram, or bicycle) are appended at the beginning or end of the journey. Trains offer quick transit from a suburb into an urban area, where passengers can choose a way to complete the trip. Most transportation modes have always been used intermodally; for example, people have used road or urban railway to an airport or inter-regional railway station.