Computer printer in the context of Multipart stationery

Risograph is a brand of digital duplicators manufactured by the Riso Kagaku Corporation. Released in Japan in 1980, it is designed mainly for high-volume photocopying and printing. It is sometimes called a printer-duplicator as newer models can be used as a network printer as well as a stand-alone duplicator. When printing or copying many duplicates (generally more than 100) of the same content, it is typically far less expensive per page than a conventional photocopier, laser printer, or inkjet printer.

Duplex printing is a feature of some computer printers and multi-function printers (MFPs) that allows the printing of a sheet of paper on both sides automatically. Print devices without this capability can only print on a single side of paper, sometimes called single-sided printing or simplex printing.

Consumer and low-to-medium volume office printers use a duplexing unit that reverses a piece of paper after the first side has been printed. Duplex multifunction printers that also support duplex scanning have a reversing automatic document feeder (RADF) for scanning both sides. Higher volume printers may effectively have two print engines in a single device, and are able to print both sides of the paper in a single pass.

Laser printing is an electrostatic digital printing process. It produces high-quality text and graphics (and moderate-quality photographs) by repeatedly passing a laser beam back and forth over a negatively charged cylinder called a "drum" to define a differentially charged image. The drum then selectively collects electrically charged powdered ink (toner), and transfers the image to paper, which is then heated to permanently fuse the text, imagery, or both to the paper. As with digital photocopiers, laser printers employ a xerographic printing process. Laser printing differs from traditional xerography as implemented in analog photocopiers in that in the latter, the image is formed by reflecting light off an existing document onto the photoconductor drum.

The laser printer was invented at Xerox PARC in the 1970s. Laser printers were introduced for the office and then home markets in subsequent years by IBM, Canon, Xerox, Apple, Hewlett-Packard and many others. Over the decades, quality and speed have increased as prices have decreased, and the once cutting-edge printing devices are now ubiquitous.

In computing, input/output (I/O, i/o, or informally io or IO) is the communication between an information processing system, such as a computer, and the outside world, such as another computer system, peripherals, or a human operator. Inputs are the signals or data received by the system and outputs are the signals or data sent from it. The term can also be used as part of an action; to "perform I/O" is to perform an input or output operation.

I/O devices are the pieces of hardware used by a human (or other system) to communicate with a computer. For instance, a keyboard or computer mouse is an input device for a computer, while monitors and printers are output devices. Devices for communication between computers, such as modems and network cards, typically perform both input and output operations. Any interaction with the system by an interactor is an input and the reaction the system responds is called the output.

Canon Production Printing, known as Océ until the end of 2019, is a Netherlands-based subset of Canon that develops, manufactures and sells printing and copying hardware and related software. The product line includes office printing and copying machinery, production printers, and wide-format printers for both technical documentation and color display graphics.

The history of Océ as a company can be traced back to 1877, although its printing-related activities did not begin until 1919.

Saddle stitch staplers or simply saddle staplers are bookbinding tools designed to insert staples into the spine (saddle) of folded printed matter such as booklets, catalogues, brochures, and manuals. They are distinguished by the presence of a metal V-shaped hump or "saddle" which is used to precisely align the central fold of the material to be stapled. Manual saddle staplers are generally longer than most traditional staplers, which are too short to staple booklets easily.

A saddle stapler may also be used to staple fabric or other flexible material, as the material is bunched up inside the throat in order to reach the seam to be stapled. Most high-end photocopiers and digital production printers on the market have optional attached saddle stitch units that fold and staple booklets automatically.

Decentralized computing is the allocation of resources, both hardware and software, to each individual workstation, or office location. In contrast, centralized computing exists when the majority of functions are carried out or obtained from a remote centralized location. Decentralized computing is a trend in modern-day business environments. This is the opposite of centralized computing, which was prevalent during the early days of computers. A decentralized computer system has many benefits over a conventional centralized network. Desktop computers have advanced so rapidly, that their potential performance far exceeds the requirements of most business applications. This results in most desktop computers remaining idle (in relation to their full potential). A decentralized system can use the potential of these systems to maximize efficiency. However, it is debatable whether these networks increase overall effectiveness.

All computers have to be updated individually with new software, unlike a centralized computer system. Decentralized systems still enable file sharing and all computers can share peripherals such as printers and scanners as well as modems, allowing all the computers in the network to connect to the internet.

In computer graphics, rasterisation (British English) or rasterization (American English) is the task of taking an image described in a vector graphics format (shapes) and converting it into a raster image (a series of pixels, dots or lines, which, when displayed together, create the image which was represented via shapes). The rasterized image may then be displayed on a computer display, video display or printer, or stored in a bitmap file format. Rasterization may refer to the technique of drawing 3D models, or to the conversion of 2D rendering primitives, such as polygons and line segments, into a rasterized format.

In computer networking, a print server, or printer server, is a type of server that connects printers to client computers over a network. It accepts print jobs from the computers and sends the jobs to the appropriate printers, queuing the jobs locally to accommodate the fact that work may arrive more quickly than the printer can actually handle. Ancillary functions include the ability to inspect the queue of jobs to be processed, the ability to reorder or delete waiting print jobs, or the ability to do various kinds of accounting (such as counting pages, which may involve reading data generated by the printer(s)). Print servers may be used to enforce administration policies, such as color printing quotas, user/department authentication, or watermarking printed documents.

Print servers may support a variety of industry-standard or proprietary printing protocols including Internet Printing Protocol, Line Printer Daemon protocol, NetWare, NetBIOS/NetBEUI, or JetDirect.

A file manager or file browser is a computer program that provides a user interface to manage files and folders. The most common operations performed on files or groups of files include creating, opening (e.g. viewing, playing, editing or printing), renaming, copying, moving, deleting and searching for files, as well as modifying file attributes, properties and file permissions. Folders and files may be displayed in a hierarchical tree based on their directory structure.

A label printer is a computer printer that prints on self-adhesive label material and/or card-stock (tags). A label printer with built-in keyboard and display for stand-alone use (not connected to a separate computer) is often called a label maker. Label printers are different from ordinary printers because they need to have special feed mechanisms to handle rolled stock, or tear sheet (fanfold) stock. Common connectivity for label printers include RS-232 serial, Universal Serial Bus (USB), parallel, Ethernet and various kinds of wireless. Label printers have a wide variety of applications, including supply chain management, retail price marking, packaging labels, blood and laboratory specimen marking, and fixed assets management.

In evidence law, digital evidence or electronic evidence is any probative information stored or transmitted in digital form that a party to a court case may use at trial. Before accepting digital evidence a court will determine if the evidence is relevant, whether it is authentic, if it is hearsay and whether a copy is acceptable or the original is required.

The use of digital evidence has increased in the past few decades as courts have allowed the use of e-mails, digital photographs, ATM transaction logs, word processing documents, instant message histories, files saved from accounting programs, spreadsheets, web browser histories, databases, the contents of computer memory, computer backups, computer printouts, Global Positioning System tracks, logs from a hotel’s electronic door locks, and digital video or audio files.