Communications protocol in the context of "Request for Comments"

Play Trivia Questions online!

or

Skip to study material about Communications protocol in the context of "Request for Comments"





๐Ÿ‘‰ Communications protocol in the context of Request for Comments

A Request for Comments (RFC) is a publication in a series from the principal technical development and standards-setting bodies for the Internet, most prominently the Internet Engineering Task Force (IETF). An RFC is authored by individuals or groups of engineers and computer scientists in the form of a memorandum describing methods, behaviors, research, or innovations applicable to the working of the Internet and Internet-connected systems. It is submitted either for peer review or to convey new concepts, information, or, occasionally, engineering humor.

The IETF adopts some of the proposals published as RFCs as Internet Standards. However, many RFCs are informational or experimental in nature and are not standards. The RFC system was invented by Steve Crocker in 1969 to help record unofficial notes on the development of ARPANET. RFCs have since become official documents of Internet specifications, communications protocols, procedures, and events. According to Crocker, the documents "shape the Internet's inner workings and have played a significant role in its success," but are not widely known outside the community.

โ†“ Explore More Topics
In this Dossier

Communications protocol in the context of Internet Protocol

The Internet Protocol (IP) is the network layer communications protocol in the Internet protocol suite for relaying datagrams across network boundaries. Its routing function enables internetworking, and essentially establishes the Internet.

IP has the task of delivering packets from the source host to the destination host solely based on the IP addresses in the packet headers. For this purpose, IP defines packet structures that encapsulate the data to be delivered. It also defines addressing methods that are used to label the datagram with source and destination information.IP was the connectionless datagram service in the original Transmission Control Program introduced by Vint Cerf and Bob Kahn in 1974, which was complemented by a connection-oriented service that became the basis for the Transmission Control Protocol (TCP). The Internet protocol suite is therefore often referred to as TCP/IP.

โ†‘ Return to Menu

Communications protocol in the context of Near-field communication

Near-field communication (NFC) is a set of communication protocols that enables communication between two electronic devices over a distance of 4ย cm (1+1โ„2ย in) or less. NFC offers a low-speed connection through a simple setup that can be used for the bootstrapping of capable wireless connections. Like other proximity card technologies, NFC is based on inductive coupling between two electromagnetic coils present on an NFC-enabled device such as a smartphone. NFC communicating in one or both directions uses a frequency of 13.56ย MHz in the globally available unlicensed radio frequency ISM band, compliant with the ISO/IEC 18000-3 air interface standard at data rates ranging from 106 to 848ย kbit/s.

The NFC Forum has helped define and promote the technology, setting standards for certifying device compliance. Secure communications are available by applying encryption algorithms as is done for credit cards and if they fit the criteria for being considered a personal area network.

โ†‘ Return to Menu

Communications protocol in the context of Cryptographic protocol

A cryptographic protocol is an abstract or concrete protocol that performs a security-related function and applies cryptographic methods, often as sequences of cryptographic primitives. A protocol describes how the algorithms should be used and includes details about data structures and representations, at which point it can be used to implement multiple, interoperable versions of a program.

Cryptographic protocols are widely used for secure application-level data transport. A cryptographic protocol usually incorporates at least some of these aspects:

โ†‘ Return to Menu

Communications protocol in the context of Transmission Control Protocol

The Transmission Control Protocol (TCP) is one of the main protocols of the Internet protocol suite. It originated in the initial network implementation in which it complemented the Internet Protocol (IP). Therefore, the entire suite is commonly referred to as TCP/IP. TCP provides reliable, ordered, and error-checked delivery of a stream of octets (bytes) between applications running on hosts communicating via an IP network. Major internet applications such as the World Wide Web, email, remote administration, file transfer and streaming media rely on TCP, which is part of the transport layer of the TCP/IP suite. SSL/TLS often runs on top of TCP. Today, TCP remains a core protocol for most Internet communication, ensuring reliable data transfer across diverse networks.

TCP is connection-oriented, meaning that sender and receiver firstly need to establish a connection based on agreed parameters; they do this through a three-way handshake procedure. The server must be listening (passive open) for connection requests from clients before a connection is established. Three-way handshake (active open), retransmission, and error detection adds to reliability but lengthens latency. Applications that do not require reliable data stream service may use the User Datagram Protocol (UDP) instead, which provides a connectionless datagram service that prioritizes time over reliability. TCP employs network congestion avoidance. However, there are vulnerabilities in TCP, including denial of service, connection hijacking, TCP veto, and reset attack.

โ†‘ Return to Menu

Communications protocol in the context of Link layer

In computer networking, the link layer is the lowest layer in the Internet protocol suite, the networking architecture of the Internet. The link layer is the group of methods and communications protocols confined to the link that a host is physically connected to. The link is the physical and logical network component used to interconnect hosts or nodes in the network, and a link protocol is a suite of methods and standards that operate only between adjacent network nodes of a network segment.

Despite the different semantics of layering between the Internet protocol suite and OSI model, the link layer is sometimes described as a combination of the OSI's data link layer (layer 2) and physical layer (layer 1).

โ†‘ Return to Menu

Communications protocol in the context of Authentication protocol

An authentication protocol is a type of computer communications protocol or cryptographic protocol specifically designed for transfer of authentication data between two entities. It allows the receiving entity to authenticate the connecting entity (e.g. Client connecting to a Server) as well as authenticate itself to the connecting entity (Server to a client) by declaring the type of information needed for authentication as well as syntax. It is the most important layer of protection needed for secure communication within computer networks.

โ†‘ Return to Menu

Communications protocol in the context of SSL certificates

In cryptography, a public key certificate, also known as a digital certificate or identity certificate, is an electronic document used to prove the validity of a public key. The certificate includes the public key and information about it, information about the identity of its owner (called the subject), and the digital signature of an entity that has verified the certificate's contents (called the issuer). If the device examining the certificate trusts the issuer and finds the signature to be a valid signature of that issuer, then it can use the included public key to communicate securely with the certificate's subject. In email encryption, code signing, and e-signature systems, a certificate's subject is typically a person or organization. However, in Transport Layer Security (TLS) a certificate's subject is typically a computer or other device, though TLS certificates may identify organizations or individuals in addition to their core role in identifying devices. TLS, sometimes called by its older name Secure Sockets Layer (SSL), is notable for being a part of HTTPS, a protocol for securely browsing the web.

In a typical public-key infrastructure (PKI) scheme, the certificate issuer is a certificate authority (CA), usually a company that charges customers a fee to issue certificates for them. By contrast, in a web of trust scheme, individuals sign each other's keys directly, in a format that performs a similar function to a public key certificate. In case of key compromise, a certificate may need to be revoked.

โ†‘ Return to Menu

Communications protocol in the context of RenderMan Interface Specification

The RenderMan Interface Specification, or RISpec in short, is an open API developed by Pixar Animation Studios to describe three-dimensional scenes and turn them into digital photorealistic images. It includes the RenderMan Shading Language.

As Pixar's technical specification for a standard communications protocol (or interface) between modeling programs and rendering programs capable of producing photorealistic-quality images, RISpec is a similar concept to PostScript but for describing 3D scenes rather than 2D page layouts. Thus, modelling programs which understand the RenderMan Interface protocol can send data to rendering software which implements the RenderMan Interface, without caring what rendering algorithms are utilized by the latter.

โ†‘ Return to Menu

Communications protocol in the context of Transition (computer science)

Transition refers to a computer science paradigm in the context of communication systems which describes the change of communication mechanisms, i.e., functions of a communication system, in particular, service and protocol components. In a transition, communication mechanisms within a system are replaced by functionally comparable mechanisms with the aim to ensure the highest possible quality, e.g., as captured by the quality of service.

Transitions enable communication systems to adapt to changing conditions during runtime. This change in conditions can, for example, be a rapid increase in the load on a certain service that may be caused, e.g., by large gatherings of people with mobile devices. A transition often impacts multiple mechanisms at different communication layers of a layered architecture.

โ†‘ Return to Menu