Tensile testing, also known as tension testing, is a fundamental materials science and engineering test in which a sample is subjected to a controlled tension until failure. Properties that are directly measured via a tensile test are ultimate tensile strength, breaking strength, maximum elongation and reduction in area. From these measurements the following properties can also be determined: Young's modulus, Poisson's ratio, yield strength, and strain-hardening characteristics. Uniaxial tensile testing is the most commonly used for obtaining the mechanical characteristics of isotropic materials. Some materials use biaxial tensile testing. The main difference between these testing machines being how load is applied on the materials.
HINT:
👉 Tensile testing in the context of Biaxial tensile testing
In materials science and solid mechanics, biaxial tensile testing is a versatile technique to address the mechanical characterization of planar materials. It is a generalized form of tensile testing in which the material sample is simultaneously stressed along two perpendicular axes. Typical materials tested in biaxial configuration include metal sheets, silicone elastomers, composites, thin films, textiles and biological soft tissues.
In this Dossier
Tensile testing in the context of Stress–strain curve
In engineering and materials science, a stress–strain curve for a material gives the relationship between the applied pressure, known as stress and amount of deformation, known as strain. It is obtained by gradually applying load to a test coupon and measuring the deformation, from which the stress and strain can be determined (see tensile testing). These curves reveal many of the properties of a material, such as the Young's modulus, the yield strength and the ultimate tensile strength.
View the full Wikipedia page for Stress–strain curveTensile testing in the context of Monofilament fishing line
Monofilament fishing line (shortened to just mono) is fishing line made from a single fiber of plastic material, as opposed to multifilament or braided fishing lines constructed from multiple strands of fibers. Most fishing lines are now nylon monofilament because they are cheap to manufacture and can be produced in a range of diameters which have different tensile strengths (called "tests" after the process of tensile testing, or possibly as a portmanteau of "tensile" and "strength"). Monofilament line is also available in different colors, such as clear, white, green, blue, red, and fluorescent.
Monofilament is made by melting and mixing polymers and then extruding the mixture through tiny holes, forming strands of line, which is then spun into spools of various thicknesses. The extrusion process controls not only the thickness of the line but its test as well.
View the full Wikipedia page for Monofilament fishing line