Sawmill in the context of "Lumber"

A fall line (or fall zone) is the area where an upland region and a coastal plain meet and is especially noticeable at the place rivers cross it, with resulting rapids or waterfalls. The uplands are relatively hard crystalline basement rock, and the coastal plain is softer sedimentary rock. A fall line often will recede upstream as a river cuts out the uphill dense material, forming "c"-shaped waterfalls and exposing bedrock shoals. Due to these features, riverboats typically cannot travel any further inland without portaging, unless locks are built. The rapid change of elevation of the water and resulting energy release make the fall line a good location for water mills, grist mills, and sawmills. Seeking a head of navigation with a ready supply of water power, people have long made settlements where rivers cross a fall line.

A watermill or water mill is a mill that uses hydropower. It is a structure that uses a water wheel or water turbine to drive a mechanical process such as milling (grinding), rolling, or hammering. Such processes are needed in the production of many material goods, including flour, lumber, paper, textiles, and many metal products. These watermills may comprise gristmills, sawmills, paper mills, textile mills, hammermills, trip hammering mills, rolling mills, and wire drawing mills.

One major way to classify watermills is by wheel orientation (vertical or horizontal), one powered by a vertical waterwheel through a gear mechanism, and the other equipped with a horizontal waterwheel without such a mechanism. The former type can be further subdivided, depending on where the water hits the wheel paddles, into undershot, overshot, breastshot and pitchback (backshot or reverse shot) waterwheel mills. Another way to classify water mills is by an essential trait about their location: tide mills use the movement of the tide; ship mills are water mills onboard (and constituting) a ship.

A plank is timber that is flat, elongated, and rectangular with parallel faces that are higher and longer than wide. Used primarily in carpentry, planks are critical in the construction of ships, houses, bridges, and many other structures. Planks also serve as supports to form shelves and tables.

Usually made from timber, sawed so that the grain runs along the length, planks are usually more than 1+1⁄2 in (38 mm) thick, and are generally wider than 2+1⁄2 in (64 mm). Planks are often used as a work surface on elevated scaffolding, and need to be thick enough to provide strength without breaking when walked on. In the United States, planks can be any length and are generally a minimum of 2×8 (1+1⁄2 in × 7+1⁄4 in or 38 mm × 184 mm), but planks that are 2×10 (1+1⁄2 in × 9+1⁄4 in or 38 mm × 235 mm) and 2×12 (1+1⁄2 in × 11+1⁄4 in or 38 mm × 286 mm) are more commonly stocked by lumber retailers. Timber is categorized as a board if its width is less than 2+1⁄2 in (64 mm), and its thickness is less than 1+1⁄2 in (38 mm). In Germany, the national norm (DIN 68252) stipulates that the thickness of a plank (termed Bohle) must be 40 mm minimum.

Logging is the process of cutting, processing, and moving trees to a location for transport. It may include skidding, on-site processing, and loading of trees or logs onto trucks or skeleton cars. In forestry, the term logging is sometimes used narrowly to describe the logistics of moving wood from the stump to somewhere outside the forest, usually a sawmill or a lumber yard. In common usage, however, the term may cover a range of forestry or silviculture activities.

Logging is the beginning of a supply chain that provides raw material for many products societies worldwide use for housing, construction, energy, and consumer paper products. Logging systems are also used to manage forests, reduce the risk of wildfires, and restore ecosystem functions, though their efficiency for these purposes has been challenged.

Brazilian industry has its earliest origin in workshops dating from the beginning of the 19th century. Most of the country's industrial establishments appeared in the Brazilian southeast (mainly in the provinces of Rio de Janeiro, Minas Gerais and, later, São Paulo), and, according to the Commerce, Agriculture, Factories and Navigation Joint, 77 establishments registered between 1808 and 1840 were classified as "factories" or "manufacturers". However, most, about 56 establishments, would be considered workshops by today's standards, directed toward the production of soap and tallow candles, snuff, spinning and weaving, foods, melting of iron and metals, wool and silk, amongst others. They used both slaves and free laborers.

There were twenty establishments that could be considered in fact manufacturers, and of this total, thirteen were created between the years 1831 and 1840. All were, however, of small size and resembled large workshops more than proper factories. Still, the manufactured goods were quite diverse: hats, combs, farriery and sawmills, spinning and weaving, soap and candles, glasses, carpets, oil, etc. Probably because of the instability of the regency period, only nine of these establishments were still functioning in 1841, but these nine were large and could be considered to "presage a new era for manufactures".

James Wilson Marshall (October 8, 1810 – August 10, 1885) was an American carpenter and sawmill operator, who on January 24, 1848, reported the finding of gold at Coloma, California, a small settlement on the American River about 36 miles northeast of Sacramento. His discovery was the impetus for the California gold rush. The mill property was owned by Johann (John) Sutter who employed Marshall to build his mill. The wave of gold seekers turned everyone's attention away from the mill which eventually fell into disrepair and was never used as intended. Neither Marshall nor Sutter ever profited from the gold find.