International Electrotechnical Commission in the context of "International standard"

In electromagnetism and electronics, electromotive force (also electromotance, abbreviated emf, denoted ${\displaystyle {\mathcal {E}}}$) is an energy transfer to an electric circuit per unit of electric charge, measured in volts. Devices called electrical transducers provide an emf by converting other forms of energy into electrical energy. Other types of electrical equipment also produce an emf, such as batteries, which convert chemical energy, and generators, which convert mechanical energy. This energy conversion is achieved by physical forces applying physical work on electric charges. However, electromotive force itself is not a physical force, and ISO/IEC standards have deprecated the term in favor of source voltage or source tension instead (denoted ${\displaystyle U_{s}}$).

An electronic–hydraulic analogy may view emf as the mechanical work done to water by a pump, which results in a pressure difference (analogous to voltage).

USB‑C, or USB Type‑C, is a 24-pin reversible connector (not a protocol) that supersedes all previous USB connectors, which were designated legacy in 2014. This connector also supersedes Mini DisplayPort and Lightning connectors. USB-C is used for a variety of purposes: exchanging data with peripheral devices, such as external drives, mobile phones, keyboards, track-pads, and mice, or between hosts, or transferring A/V-data to displays and speakers, or also powering peripheral devices and getting powered by power adapters; either through directly wired connectors, or indirectly via hubs and docking stations. This connector type can be used for other data transfer protocols besides USB, such as Thunderbolt, PCIe, DisplayPort, and HDMI. It is considered extensible, allowing the support of future protocols.

The design for the USB‑C connector was initially developed in 2012 by Intel, Apple Inc., HP Inc., Microsoft, and the USB Implementers Forum. The Type‑C Specification 1.0 was published by the USB Implementers Forum (USB-IF) on August 11, 2014. In 2016 it was adopted by the IEC as "IEC 62680-1-3".

The Adobe RGB (1998) color space or opRGB is a color space developed by Adobe Inc. in 1998. It was designed to encompass most of the colors achievable on CMYK color printers, but by using RGB primary colors on a device such as a computer display. The Adobe RGB (1998) color space encompasses roughly 30% of the visible colors specified by the CIELAB color space – improving upon the gamut of the sRGB color space, primarily in cyan-green hues. It was subsequently standardized by the IEC as IEC 61966-2-5:1999 with a name opRGB (optional RGB color space) and is used in HDMI.

sRGB (standard RGB) is a color space, for use on monitors, printers, and the World Wide Web. It was initially proposed by HP and Microsoft in 1996 and became an official standard of the International Electrotechnical Commission (IEC) as IEC 61966-2-1:1999. It is the current standard colorspace for the web, and it is usually the assumed colorspace for images that do not have an embedded color profile.

The sRGB standard uses the same color primaries and white point as the ITU-R BT.709 standard for HDTV, but a different transfer function (or gamma) compatible with the era's CRT displays, and assumes a viewing environment closer to typical home and office viewing conditions. Matching the behavior of PC video cards and CRT displays greatly aided sRGB's popularity.

The Joint Photographic Experts Group (JPEG) is the joint committee between ISO/IEC JTC 1/SC 29 and ITU-T Study Group 16 that created and maintains the JPEG, JPEG 2000, JPEG XR, JPEG XT, JPEG XS, JPEG XL, and related digital image standards. It also has the responsibility for maintenance of the JBIG and JBIG2 standards that were developed by the former Joint Bi-level Image Experts Group.

Within ISO/IEC JTC 1, JPEG is Working Group 1 (WG 1) of Subcommittee 29 (SC 29) and has the formal title JPEG Coding of digital representations of images, where it is one of eight working groups in SC 29. In the ITU-T (formerly called the CCITT), its work falls in the domain of the ITU-T Visual Coding Experts Group (VCEG), which is Question 6 of Study Group 16.

The siemens (symbol: S) is the unit of electric conductance, electric susceptance, and electric admittance in the International System of Units (SI). Conductance, susceptance, and admittance are the reciprocals of resistance, reactance, and impedance respectively; hence one siemens is equal to the reciprocal of one ohm (Ω) and is also referred to as the mho. The siemens was adopted by the IEC in 1935, and the 14th General Conference on Weights and Measures approved the addition of the siemens as a derived unit in 1971.

The unit is named after Ernst Werner von Siemens. In English, the same word siemens is used both for the singular and plural. Like other SI units named after people, the name of the unit (siemens) is not capitalized. Its symbol (S), however, is capitalized to distinguish it from the second, whose symbol (s) is lower case.

C is a general-purpose programming language. It was created in the 1970s by Dennis Ritchie and remains widely used and influential. By design, C gives the programmer relatively direct access to the features of the typical CPU architecture, customized for the target instruction set. It has been and continues to be used to implement operating systems (especially kernels), device drivers, and protocol stacks, but its use in application software has been decreasing. C is used on computers that range from the largest supercomputers to the smallest microcontrollers and embedded systems.

A successor to the programming language B, C was originally developed at Bell Labs by Ritchie between 1972 and 1973 to construct utilities running on Unix. It was applied to re-implementing the kernel of the Unix operating system. During the 1980s, C gradually gained popularity. It has become one of the most widely used programming languages, with C compilers available for practically all modern computer architectures and operating systems. The book The C Programming Language, co-authored by the original language designer, served for many years as the de facto standard for the language. C has been standardized since 1989 by the American National Standards Institute (ANSI) and, subsequently, jointly by the International Organization for Standardization (ISO) and the International Electrotechnical Commission (IEC).

The Common Criteria for Information Technology Security Evaluation (referred to as Common Criteria or CC) is an international standard (ISO/IEC 15408) for computer security certification. It is currently in version 2022 revision 1.

Common Criteria is a framework in which computer system users can specify their security functional and assurance requirements (SFRs and SARs, respectively) in a Security Target (ST), and may be taken from Protection Profiles (PPs). Vendors can then implement or make claims about the security attributes of their products, and testing laboratories can evaluate the products to determine if they actually meet the claims. In other words, Common Criteria provides assurance that the process of specification, implementation and evaluation of a computer security product has been conducted in a rigorous and standard and repeatable manner at a level that is commensurate with the target environment for use. Common Criteria maintains a list of certified products, including operating systems, access control systems, databases, and key management systems.