A foil is a very thin sheet of metal, typically made by hammering or rolling. Foils are most easily made with malleable metal, such as aluminium, copper, tin, and gold. Foils usually bend under their own weight and can be torn easily. For example, aluminium foil is usually about 1⁄1000 inch (0.025 mm), whereas gold (more malleable than aluminium) can be made into foil only a few atoms thick, called gold leaf. Extremely thin foil is called metal leaf. Leaf tears very easily and must be picked up with special brushes.
___Rutherford_scattering_q.jpg)
>>>PUT SHARE BUTTONS HERE<<<
👉 Foil (metal) in the context of Rutherford scattering
The Rutherford scattering experiments were a landmark series of experiments by which scientists learned that every atom has a nucleus where all of its positive charge and most of its mass is concentrated. They deduced this after measuring how an alpha particle beam is scattered when it strikes a thin metal foil. The experiments were performed between 1906 and 1913 by Hans Geiger and Ernest Marsden under the direction of Ernest Rutherford at the Physical Laboratories of the University of Manchester.
The physical phenomenon was explained by Rutherford in a classic 1911 paper that eventually led to the widespread use of scattering in particle physics to study subatomic matter. Rutherford scattering or Coulomb scattering is the elastic scattering of charged particles by the Coulomb interaction. The paper also initiated the development of the planetary Rutherford model of the atom and eventually the Bohr model.
In this Dossier
Foil (metal) in the context of Metal leaf
A metal leaf, also called composition leaf or schlagmetal, is a thin foil used for gilding and other forms of decoration. Metal leaves can come in many different shades, due to the composition of the metal within the metal leaf. Examples of this variation of shades in metal leaves can be found in Ancient Egyptian gold leaves, as the silver content within the gold leaves could make them appear bright yellow or paler shades of yellow. Some metal leaves may look like gold leaf but do not contain any real gold. This type of metal leaf is often referred to as imitation leaf.
Metal leaves are usually made of gold (including many alloys), silver, copper, aluminium, brass (sometimes called "Dutch metal" typically 85% copper and 15% zinc) or palladium, as well as platinum.
Foil (metal) in the context of Sheet metal
Sheet metal is metal formed into thin, flat pieces, usually by an industrial process.
Thicknesses can vary significantly; extremely thin sheets are considered foil or leaf, and pieces thicker than 6 mm (0.25 in) are considered plate, such as plate steel, a class of structural steel.
Foil (metal) in the context of Aluminium foil
Aluminium foil (or aluminum foil in American English; also called tinfoil) is aluminium prepared in thin metal leaves. The foil is pliable and can be readily bent or wrapped around objects. Thin foils are fragile and are sometimes laminated with other materials such as plastics or paper to make them stronger and more useful.
Annual production of aluminium foil was approximately 850,000 tonnes (940,000 tons) in Europe in 2014, and 600,000 tonnes (660,000 tons) in the U.S. in 2003. Approximately 75% of aluminium foil is used for packaging of foods, cosmetics, and chemical products, and 25% is used for industrial applications (e.g., thermal insulation, electrical cables, and electronics). It can be easily recycled.