Bucket in the context of Masonry trowel

A water wheel is a machine for converting the kinetic energy of flowing or falling water into useful forms of power, often in a watermill. A water wheel consists of a large wheel (usually constructed from wood or metal), with numerous blades or buckets attached to the outer rim forming the drive mechanism. Water wheels were still in commercial use well into the 20th century, although they are no longer in common use today. Water wheels are used for milling flour in gristmills, grinding wood into pulp for papermaking, hammering wrought iron, machining, ore crushing and pounding fibre for use in the manufacture of cloth.

Some water wheels are fed by water from a mill pond, which is formed when a flowing stream is dammed. A channel for the water flowing to or from a water wheel is called a mill race. The race bringing water from the mill pond to the water wheel is a headrace; the one carrying water after it has left the wheel is commonly referred to as a tailrace.

A well is an excavation or structure created on the earth by digging, driving, or drilling to access liquid resources, usually water. The oldest and most common kind of well is a water well, to access groundwater in underground aquifers. The well water is drawn up by a pump, or using containers, such as buckets that are raised mechanically or by hand. Water can also be injected back into the aquifer through the well. Wells were first constructed at least eight thousand years ago and historically vary in construction from a sediment of a dry watercourse to the qanats of Iran, and the stepwells and sakiehs of India. Placing a lining in the well shaft helps create stability, and linings of wood or wickerwork date back at least as far as the Iron Age.

Wells have traditionally been sunk by hand digging, as is still the case in rural areas of the developing world. These wells are inexpensive and low-tech as they use mostly manual labour, and the structure can be lined with brick or stone as the excavation proceeds. A more modern method called caissoning uses pre-cast reinforced concrete well rings that are lowered into the hole. Driven wells can be created in unconsolidated material with a well hole structure, which consists of a hardened drive point and a screen of perforated pipe, after which a pump is installed to collect the water. Deeper wells can be excavated by hand drilling methods or machine drilling, using a bit in a borehole. Drilled wells are usually cased with a factory-made pipe composed of steel or plastic. Drilled wells can access water at much greater depths than dug wells.

Contentment is a state of being or emotion in which one is satisfied with their current life situation, and the state of affairs in one's life as they presently are. If one is content, they are at inner peace with their situation and how the elements in one's life are situated. Contrary to popular belief, it is possible to be content with one's life regardless of the circumstance, regardless of whether things are going as one expected or not.

The root of the word contentment comes from the Latin contentus, which means "held together" or "intact, whole." Originally, contentus was used to describe containers, literally things like cups, buckets, and barrels. Later, the word evolved into something that could reflect onto a person, which describes one who feels complete, with no desires beyond themselves.

A cooper is a craftsman who produces wooden casks, barrels, vats, buckets, tubs, troughs, and other similar containers from timber staves that were usually heated or steamed to make them pliable.

Journeymen coopers also traditionally made wooden implements, such as rakes and wooden-bladed shovels. In addition to wood, other materials, such as iron, were used in the manufacturing process. The trade is the origin of the surname Cooper.

A mop bucket cart (or mop trolley) is a wheeled bucket that allows its user to wring out a wet mop without getting the hands dirty. The cart has two buckets with the upper one usually clipped onto the lower.

The upper bucket is used to place the wet mop for storage and press handle to wring out the mop. Water trickles down to another bucket below, which collects the waste water. In some carts, there are separate lower front bucket to collect waste water. The smaller lower rear bucket is filled with a floor cleaning solution. Wheels are usually present to allow the user to push the cart around using the wring handle bar to steer, allowing complete mobility.

A soap shaker is a wire metal mesh box with a handle. The box may be opened so as to be able to place pieces of bar soap inside, including fragments that have become too small to be used as hand soap.

The box may now be securely closed. Held by its handle the box may be vigorously shaken in a water filled bucket or other container. The shaking will move the water through the box. The result is that the water will become soapy, rich with suds to be used for cleaning purposes. This way even small pieces of bar soap could be re-used and are not wasted.

A bucket-wheel excavator (BWE) is a large heavy equipment machine used in surface mining.

Their primary function is that of a continuous digging machine in large-scale open-pit mining operations, removing thousands of tons of overburden a day. What sets them apart from other large-scale mining equipment, such as bucket chain excavators, is their use of a large wheel consisting of a continuous pattern of buckets which scoop material as the wheel turns. They are among the largest land or sea vehicles ever produced. The 14,200-ton Bagger 293 holds the Guinness World Record for the heaviest land-based vehicle ever built.

In technical usage in the shipping industry, a pail is a type of cylindrical shipping container with a capacity of about 3 to 50 litres (1 to 13 US gal). It can have straight or slanted sides and usually has a handle or bail. In non-technical usage, a pail is synonymous with a bucket.

A bucket (also called a scoop to qualify shallower designs of tools) is a specialized container attached to a machine, as compared to a bucket adapted for manual use by a human being. It is a bulk material handling component.

The bucket has an inner volume as compared to other types of machine attachments like blades or shovels.

Situla (plural situlae), from the Latin word for bucket or pail, is the term in archaeology and art history for a variety of elaborate bucket-shaped vessels from the Bronze Age to the Middle Ages, usually with a handle at the top. All types may be highly decorated, most characteristically with reliefs in bands or friezes running round the vessel.

Decorated Iron Age situlae in bronze are a distinctive feature of Etruscan art in burials from the northern part of the Etruscan regions, from which the style spread north to some cultures in Northern Italy, Slovenia, and adjacent areas, where terms such as situla culture and situla art may be used.