Bitumen in the context of "Diagenesis"

Play Trivia Questions online!

or

Skip to study material about Bitumen in the context of "Diagenesis"

Ad spacer

⭐ Core Definition: Bitumen

Bitumen (UK: /ˈbɪʊmɪn/ BIH-chuum-in, US: /bɪˈtjmɪn, b-/ bih-TEW-min, by-) is an immensely viscous constituent of petroleum. Depending on its exact composition, it can be a sticky, black liquid or an apparently solid mass that behaves as a liquid over very large time scales. In American English, the material is commonly referred to as asphalt. Whether found in natural deposits or refined from petroleum, the substance is classed as a pitch. Prior to the 20th century, the term asphaltum was in general use. The word derives from the Ancient Greek word ἄσφαλτος (ásphaltos), which referred to natural bitumen or pitch. The largest natural deposit of bitumen in the world is the Pitch Lake of southwest Trinidad, which is estimated to contain 10 million tons.

About 70% of annual bitumen production is destined for road construction, its primary use. In this application, bitumen is used to bind aggregate particles like gravel and forms a substance referred to as asphalt concrete, which is colloquially termed asphalt. Its other main uses lie in bituminous waterproofing products, such as roofing felt and roof sealant.

↓ Menu

>>>PUT SHARE BUTTONS HERE<<<

👉 Bitumen in the context of Diagenesis

Diagenesis (/ˌd.əˈɛnəsɪs/) is the process of physical and chemical changes in sediments first caused by water-rock interactions, microbial activity, and compaction after their deposition. Increased pressure and temperature only start to play a role as sediments become buried much deeper in the Earth's crust. In the early stages, the transformation of poorly consolidated sediments into sedimentary rock (lithification) is simply accompanied by a reduction in porosity and water expulsion (clay sediments), while their main mineralogical assemblages remain unaltered. As the rock is carried deeper by further deposition above, its organic content is progressively transformed into kerogens and bitumens.

The process of diagenesis excludes surface alteration (weathering) and deep metamorphism. There is no sharp boundary between diagenesis and metamorphism, but the latter occurs at higher temperatures and pressures. Hydrothermal solutions, meteoric groundwater, rock porosity, permeability, dissolution/precipitation reactions, and time are all influential factors.

↓ Explore More Topics
In this Dossier

Bitumen in the context of Ur

Ur (/ʊr/ or /ɜːr/) was a major Sumerian city-state in ancient Mesopotamia, located at the site of modern Tell el-Muqayyar (Arabic: تَلّ ٱلْمُقَيَّر, lit.'mound of bitumen') in Dhi Qar Governorate, southern Iraq. Although Ur was a coastal city near the mouth of the Euphrates on the Persian Gulf, the coastline has shifted and the site is now well inland, on the south bank of the Euphrates, 16 km (10 mi) southwest of Nasiriyah in modern-day Iraq. The city dates from the Ubaid period c. 3800 BC, and is recorded in written history as a city-state from the 26th century BC, its first recorded king being Mesannepada.

The city's patron deity was the moon god Nanna (Sin in Akkadian), and the name of the city is derived from UNUG, literally "the abode (of Nanna)". The site is marked by the partially restored ruins of the Ziggurat of Ur, which contained the shrine of Nanna, excavated in the 1930s. The temple was built in the 21st century BC (short chronology), during the reign of Ur-Nammu and was reconstructed in the 6th century BC by Nabonidus, the last king of Babylon.

↑ Return to Menu

Bitumen in the context of Nymphaion (fire sanctuary)

Nymphaion (Ancient Greek: Νυμφαῖον, Nymphaîon) was the name given to the ancient sanctuary of the "eternal fire" located in southern Illyria, notably near Apollonia, in modern-day Albania. The location also featured bitumen mines, which, still functioning today, have held a crucial role throughout the history of the region.

Placed inland on the Vjosë/Aoos river, the area was occupied by Illyrians since before archaic colonial times, and the site was likely already a place of worship because of its peculiar physical properties. Attested local tribes of the area were the Bylliones and the Amantes. In the 7th–6th century BCE Apollonia was founded on the Illyrian coast near this site by a joint colony of Corinth and Kerkyra. According to ancient literary tradition the fire of the sanctuary never went out before an ancient war fought between Apollonia and the Illyrians. Around mid-5th century BCE, after conquering nearby Thronion, Apollonia consolidated its control over the site of the fire sanctuary and the area of the bitumen mines. Until the Apollonian conquest, the control of the bitumen mines may have produced in part the wealth of Thronion.

↑ Return to Menu

Bitumen in the context of Oil refinery

An oil refinery or petroleum refinery is an industrial process plant where petroleum (crude oil) is transformed and refined into products such as gasoline (petrol), diesel fuel, asphalt base, fuel oils, heating oil, kerosene, liquefied petroleum gas and petroleum naphtha. Petrochemical feedstock like ethylene and propylene can also be produced directly by cracking crude oil without the need of using refined products of crude oil such as naphtha. The crude oil feedstock has typically been processed by an oil production plant. There is usually an oil depot at or near an oil refinery for the storage of incoming crude oil feedstock as well as bulk liquid products. In 2020, the total capacity of global refineries for crude oil was about 101.2 million barrels per day.

Oil refineries are typically large, sprawling industrial complexes with extensive piping running throughout, carrying streams of fluids between large chemical processing units, such as distillation columns. In many ways, oil refineries use many different technologies and can be thought of as types of chemical plants. Since December 2008, the world's largest oil refinery has been the Jamnagar Refinery owned by Reliance Industries, located in Gujarat, India, with a processing capacity of 1.24 million barrels (197,000 m) per day.

↑ Return to Menu

Bitumen in the context of Oil shale

Oil shale is an organic-rich fine-grained sedimentary rock containing kerogen (a solid mixture of organic chemical compounds) from which liquid hydrocarbons can be produced. In addition to kerogen, general composition of oil shales constitutes inorganic substance and bitumens. Based on their deposition environment, oil shales are classified as marine, lacustrine and terrestrial oil shales. Oil shales differ from oil-bearing shales, shale deposits that contain petroleum (tight oil) that is sometimes produced from drilled wells. Examples of oil-bearing shales are the Bakken Formation, Pierre Shale, Niobrara Formation, and Eagle Ford Formation. Accordingly, shale oil produced from oil shale should not be confused with tight oil, which is also frequently called shale oil.

A 2016 estimate of global deposits set the total world resources of oil shale equivalent of 6.05 trillion barrels (962 billion cubic metres) of oil in place. Oil shale has gained attention as a potential abundant source of oil. However, the various attempts to develop oil shale deposits have had limited success. Only Estonia and China have well-established oil shale industries, and Brazil, Germany, and Russia utilize oil shale to some extent.

↑ Return to Menu

Bitumen in the context of View from the Window at Le Gras

View from the Window at Le Gras (French: Point de vue du Gras) is the oldest surviving photograph. It was created by French inventor Nicéphore Niépce sometime between 1826 and 1827 in Saint-Loup-de-Varennes, France, and shows parts of the buildings and surrounding countryside of his estate, Le Gras [fr], as seen from a high window. The image was created by heliography, a process which Niépce had invented around 1822, and which uses the hardening of bitumen in light to record an image after washing off the remaining unhardened material.

↑ Return to Menu

Bitumen in the context of Pitch (resin)

Pitch is a viscoelastic polymer which can be natural or manufactured, derived from petroleum, coal tar, or plants. Pitch produced from petroleum may be called bitumen or asphalt, while plant-derived pitch, a resin, is known as rosin in its solid form. Tar is sometimes used interchangeably with pitch, but generally refers to a more liquid substance derived from coal production, including coal tar, or from plants, as in pine tar.

↑ Return to Menu

Bitumen in the context of Downstream (petroleum industry)

The oil and gas industry is usually divided into three major sectors: upstream, midstream, and downstream. The downstream sector is the refining of petroleum crude oil and the processing and purifying of raw natural gas, as well as the marketing and distribution of products derived from crude oil and natural gas. The downstream sector reaches consumers through products such as gasoline or petrol, kerosene, jet fuel, diesel oil, heating oil, fuel oils, lubricants, waxes, asphalt, natural gas, and liquefied petroleum gas (LPG) as well as naphtha and hundreds of petrochemicals.

Midstream operations are often included in the downstream category and are considered to be a part of the downstream sector.

↑ Return to Menu

Bitumen in the context of Petroleum product

Petroleum products are materials derived from crude oil (petroleum) as it is processed in oil refineries. Unlike petrochemicals, which are a collection of well-defined usually pure organic compounds, petroleum products are complex mixtures. Most petroleum is converted into petroleum products, which include several classes of fuels.

According to the composition of the crude oil and depending on the demands of the market, refineries can produce different shares of petroleum products. The largest share of oil products is used as "energy carriers", i.e. various grades of fuel oil and gasoline. These fuels include or can be blended to give gasoline, jet fuel, diesel fuel, heating oil, and heavier fuel oils. Heavier (less volatile) fractions can also be used to produce asphalt, tar, paraffin wax, lubricating and other heavy oils. Refineries also produce other chemicals, some of which are used in chemical processes to produce plastics and other useful materials. Since petroleum often contains a few percent sulfur-containing molecules, elemental sulfur is also often produced as a petroleum product. Carbon, in the form of petroleum coke, and hydrogen may also be produced as petroleum products. The hydrogen produced is often used as an intermediate product for other oil refinery processes such as hydrocracking and hydrodesulfurization.

↑ Return to Menu