Aircraft fairing in the context of "Junkers Ju 87 Stuka"

Landing gear is the undercarriage of an aircraft or spacecraft that is used for engaging the surface — typically land, but may also be the surface of a water body — when parking, taxiing, takeoff or landing. It was also formerly called alighting gear by some manufacturers, such as the Glenn L. Martin Company. For aircraft, Stinton makes the terminology distinction undercarriage (British) = landing gear (US).

For aircraft, landing gear is the foundational part of airframe that supports the craft's weight when it is not in flight, keeping the fuselage at a clearance off the ground so it can avoid sustaining frictional/collisional damages. Wheeled landing gear is the most ubiquitous, used in almost all aircraft that perform conventional and short takeoff and landing, while skids or floats are used in aircraft that can take off and land vertically or operate from snow/ice/water. Landing gears from early aircraft are usually fixed, and remain protruded under the aircraft during flight, with no or only partial fairing coverage to reduce drag; while most modern aircraft have retractable undercarriages that fold into the fuselage during flight, which maximizes aerodynamic streamlining and allows for faster airspeeds and smoother flight control.

The NACA cowling is a type of aerodynamic fairing used to streamline radial engines installed on airplanes. It was developed by Fred Weick of the National Advisory Committee for Aeronautics (NACA) in 1927. It was a major advancement in aerodynamic drag reduction, and paid for its development and installation costs many times over due to the gains in fuel efficiency that it enabled. NACA won the 1929 Collier Trophy for its development.

The wing root is the part of the wing on a fixed-wing aircraft or winged-spaceship that is closest to the fuselage, and is the junction of the wing with the fuselage (not with a nacelle or any other body). The term is also used for the junction of the wing with the opposite wing, ie on the fuselage centerline, as with the upper wing of a biplane. The opposite end of a wing from the wing root is the wing tip.

The aerodynamic properties of the overall aircraft can be greatly impacted by the shaping and other design choices of the wing root. During both normal flight and landings, the wing root of an aircraft would be typically subjected to the highest bending forces through the aircraft. As a means of reducing interference drag between the wing and the fuselage, the use of fairings (often referred to as "wing fillets") became commonplace during the first half of the twentieth century; the use of wing root fairings has been credited with achieving more favourable flight characteristics at both high and low speeds. Furthermore, various other innovations and approaches have been developed to influence/control airflow in the vicinity of the wing root to achieve more favourable performance. Various calculating methods for designed an optimal wing root of an aircraft have been devised.