In geodesy, surveying, hydrography and navigation, vertical datum or altimetric datum is a reference coordinate surface used for vertical positions, such as the elevations of Earth-bound features (terrain, bathymetry, water level, and built structures) and altitudes of satellite orbits and in aviation.In planetary science, vertical datums are also known as zero-elevation surface or zero-level reference.
Commonly adopted criteria for a vertical datum include the following approaches:
Mean sea level (MSL, often shortened to sea level) is an average surface level of one or more among Earth's coastal bodies of water from which heights such as elevation may be measured. The global MSL is a type of vertical datum – a standardised geodetic datum – that is used, for example, as a chart datum in cartography and marine navigation, or, in aviation, as the standard sea level at which atmospheric pressure is measured to calibrate altitude and, consequently, aircraft flight levels. A common and relatively straightforward mean sea-level standard is instead a long-term average of tide gauge readings at a particular reference location.
The term above sea level generally refers to the height above mean sea level (AMSL). The term APSL means above present sea level, comparing sea levels in the past with the level today.
Height above mean sea level is a measure of a location's vertical distance (height, elevation or altitude) in reference to a vertical datum based on a historic mean sea level. In geodesy, it is formalized as orthometric height. The zero level varies in different countries due to different reference points and historic measurement periods. Climate change and other forces can cause sea levels and elevations to vary over time.
Tide tables, sometimes called tide charts, are used for tidal prediction and show the daily times and levels of high and low tides, usually for a particular location. Tide heights at intermediate times (between high and low water) can be approximated by using the rule of twelfths or more accurately calculated by using a published tidal curve for the location. Tide levels are typically given relative to a low-water vertical datum, e.g. the mean lower low water (MLLW) datum in the US.
Metres above the Adriatic (Italian: Metri sopra l'Adriatico, German: Meter über Adria, Serbo-Croatian: Metara iznad Jadrana) is the vertical datum used in Albania, Austria, Bosnia and Herzegovina, Croatia, Montenegro, North Macedonia, Serbia, and Slovenia to measure elevation, referring to the average water level of the Adriatic Sea at the Sartorio mole in the Port of Trieste.
Vertical position or vertical location is a position along a vertical direction (the plumb line direction) above or below a given vertical datum (a reference level surface, such as mean sea level).Vertical distance or vertical separation is the distance between two vertical positions.Many vertical coordinates exist for expressing vertical position: depth, height, altitude, elevation, etc.Points lying on an equigeopotential surface are said to be on the same vertical level, as in a water level.A function with domain along the vertical line is called a vertical distribution or vertical profile.