Track (rail transport) in the context of "Monorail"

A railway platform is an area in a train station alongside a railway track providing convenient access to trains. Almost all stations have some form of platform, with larger stations having multiple platforms.

Grand Central Terminal in Midtown Manhattan hosts 44 platforms, more than any other rail station in the world. The world's longest station platform is at Hubballi Junction in India at 1,507 metres (4,944 ft). The Appalachian Trail station or Benson station in the United States, at the other extreme, has a platform which is only long enough for a single bench.

A utility tunnel, utility corridor, or utilidor is a passage built underground or above ground to carry utility lines such as electricity, steam, water supply pipes, and sewer pipes. Communications utilities like fiber optics, cable television, and telephone cables are also sometimes carried. One may also be referred to as a services tunnel, services trench, services vault, or cable vault. Smaller cable containment is often referred to as a cable duct or underground conduit. Direct-buried cable (installed using trenches) is a major alternative to ducts or tunnels.

An elevated railway or elevated train (also known as an el train or el for short) is a railway with the tracks above street level on a viaduct or other elevated structure (usually constructed from steel, cast iron, concrete, or bricks). The railway may be a broad-gauge, standard-gauge or narrow-gauge railway, rapid transit, light rail, monorail, or a suspension railway. Elevated railways are normally found in urban areas that would otherwise require impracticably many level crossings. Usually, the tracks of elevated railways that run on steel viaducts can be seen from street level.

A train wheel or rail wheel is a type of wheel specially designed for use on railway tracks. The wheel acts as a rolling component, typically press fitted on to an axle and mounted directly on a railway carriage or locomotive, or indirectly on a bogie (CwthE) or truck (NAmE). The powered wheels under the locomotive are called driving wheels. Wheels are initially cast or forged and then heat-treated to have a specific hardness. New wheels are machined using a lathe to a standardised shape, called a profile. All wheel profiles are regularly checked to ensure proper interaction between the wheel and the rail. Incorrectly profiled wheels and worn wheels can increase rolling resistance, reduce energy efficiency and may even cause a derailment. The International Union of Railways has defined a standard wheel diameter of 920 mm (36 in), although smaller sizes are used in some rapid transit railway systems and on ro-ro carriages.

Track geometry is concerned with the properties and relations of points, lines, curves, and surfaces in the three-dimensional positioning of railroad track. The term is also applied to measurements used in design, construction and maintenance of track. Track geometry involves standards, speed limits and other regulations in the areas of track gauge, alignment, elevation, curvature and track surface. Standards are usually separately expressed for horizontal and vertical layouts although track geometry is three-dimensional. Modern maintenance regimes increasingly use 3D laser scanning (LiDAR) to capture these geometric parameters and assess structure gauge compliance without physical contact.

A railroad tie, crosstie (American English), railway tie (Canadian English) or railway sleeper (Australian and British English) is a rectangular support for the rails in railroad tracks. Generally laid perpendicular to the rails, ties transfer loads to the track ballast and subgrade, hold the rails upright and keep them spaced to the correct gauge.

Railroad ties are traditionally made of wood, but prestressed concrete is now also widely used, especially in Europe and Asia. Steel ties are common on secondary lines in the UK; plastic composite ties are also employed, although far less than wood or concrete. As of January 2008, the approximate market share in North America for traditional and wood ties was 91.5%, the remainder being concrete, steel, azobé (red ironwood) and plastic composite.

A ballastless track or slab track is a type of railway track infrastructure in which the traditional elastic combination of sleepers and ballast is replaced by a rigid construction of concrete or asphalt. It is considered the standard for high-speed and heavy-haul railway lines. It is also commonly used for urban tramways.

In transport engineering, subgrade is the term used in the US for the native material underneath a constructed road, pavement or railway track (US: railroad track). In British English it is called formation level.

The subgrade provides support to the subbase level and acts as an integral load-bearing layer. Failure of the subgrade can cause depressions and rutting of the upper base and surface courses. These in turn can lead to water pooling in deformations and cause vehicle aquaplaning among other issues.

A third rail, also known as a live rail, electric rail or conductor rail, is a method of providing electric power to a railway locomotive or train, through a semi-continuous rigid conductor placed alongside or between the rails of a railway track. It is used typically in a mass transit or rapid transit system, which has alignments in its own corridors, fully or almost fully segregated from the outside environment. Third-rail systems are usually supplied with direct current.

Modern tram systems with street running avoid the electrical injury risk of the exposed electric rail by implementing a segmented ground-level power supply, where each segment is electrified only while covered by a vehicle which is using its power.