The fore plane is a type of woodworking bench plane typically used for preparing and flattening rough workpieces before using other planes, such as the jointer plane and the smoothing plane. The name fore plane is sometimes used synonymously with the jack plane, but the fore plane is usually longer in length, making it more effective at levelling larger workpieces.
>>>PUT SHARE BUTTONS HERE<<<
In this Dossier
Smoothing plane in the context of Scrub plane
The scrub plane is a type of plane used to remove large amounts of wood from the surface of lumber, such as when eliminating cup or twist in the first stages of preparing rough stock, or when reducing the thickness of a board significantly. Scrub planes generally have a short sole, a relatively narrow but thick blade, a very wide mouth, and a deeply curved edge (of about a 3 inch to 7 inch radius) to make a deep, gouging cut.
A scrub plane is generally used in diagonal strokes across the face of a board, rather than parallel to the length of the board (along the grain) as with most other bench planes. In thicknessing or preparing rough stock, the scrub plane is usually followed by the jack plane, jointer plane, then smoothing plane.