Simplex communication in the context of "Two-way radio"

Play Trivia Questions online!

 or

Skip to study material about Simplex communication in the context of "Two-way radio"
Ad spacer

⭐ Core Definition: Simplex communication

A duplex communication system is a point-to-point system composed of two or more connected parties or devices that can communicate with one another in both directions. Duplex systems are employed in many communications networks, either to allow for simultaneous communication in both directions between two connected parties or to provide a reverse path for the monitoring and remote adjustment of equipment in the field. There are two types of duplex communication systems: full-duplex (FDX) and half-duplex (HDX).

In a full-duplex system, both parties can communicate with each other simultaneously. An example of a full-duplex device is plain old telephone service; the parties at both ends of a call can speak and be heard by the other party simultaneously. The earphone reproduces the speech of the remote party as the microphone transmits the speech of the local party. There is a two-way communication channel between them, or more strictly speaking, there are two communication channels between them.

↓ Menu

>>>PUT SHARE BUTTONS HERE<<<

👉 Simplex communication in the context of Two-way radio

A two-way radio is a radio transceiver (a radio that can both transmit and receive radio waves), which is used for bidirectional person-to-person voice communication with other users with similar radios, in contrast to a broadcast receiver, which only receives transmissions.

Two-way radios usually use a half-duplex communication channel, which permits two-way communication, albeit with the limitation that only one user can transmit at a time. (This is in contrast to simplex communication, in which transmission can only be sent in one direction, and full-duplex, which allows transmission in both directions simultaneously.) This requires users in a group to take turns talking. The radio is normally in receive mode so the user can hear all other transmissions on the channel. When the user wants to talk, they press a "push-to-talk" button, which turns off the receiver and turns on the transmitter; when the button is released, the receiver is activated again. Multiple channels may be provided so separate user groups can communicate in the same area without interfering with each other and some radios are designed to scan the channels in order to find a valid transmission. Other two-way radio systems operate in full-duplex mode, in which both parties can talk simultaneously. This requires either two separate radio channels or channel sharing methods such as time-division duplex (TDD) to carry the two directions of the conversation simultaneously on a single radio frequency.

↓ Explore More Topics
In this Dossier

Simplex communication in the context of Radio network

There are two types of radio network currently in use around the world: the one-to-many (simplex communication) broadcast network commonly used for public information and mass-media entertainment, and the two-way radio (duplex communication) type used more commonly for public safety and public services such as police, fire, taxicabs, and delivery services. Cell phones are able to send and receive simultaneously by using two different frequencies at the same time. Many of the same components and much of the same basic technology applies to all three.

The two-way type of radio network shares many of the same technologies and components as the broadcast-type radio network but is generally set up with fixed broadcast points (transmitters) with co-located receivers and mobile receivers/transmitters or transceivers. In this way both the fixed and mobile radio units can communicate with each other over broad geographic regions ranging in size from small single cities to entire states/provinces or countries. There are many ways in which multiple fixed transmit/receive sites can be interconnected to achieve the range of coverage required by the jurisdiction or authority implementing the system: conventional wireless links in numerous frequency bands, fibre-optic links, or microwave links. In all of these cases the signals are typically backhauled to a central switch of some type where the radio message is processed and resent (repeated) to all transmitter sites where it is required to be heard.

↑ Return to Menu
LINKED FROM (PARENTS)
← Two-way radio ← Radio network ← Two-way radios
LINKS TO (CHILDREN)
Communication system → Point-to-point (telecommunications) → Plain old telephone service →