Siding (construction) in the context of "Tongue and groove"

Tongue and groove is a method of fitting similar objects together, edge to edge, used mainly with wood, in flooring, parquetry, panelling, and similar constructions. A strong joint, it allows two flat pieces to be joined strongly together to make a single flat surface. Before plywood became common, tongue-and-groove boards were also used for sheathing buildings and to construct concrete formwork.

Each piece has a slot (the groove or dado) cut all along one edge or along two adjacent edges, and a thin, deep ridge (the tongue) on the opposite edge or edges. The tongue projects a little less than the depth of the groove. Two or more pieces thus fit together closely. The joint is not normally glued, as shrinkage would then pull the tongue off. The effect of wood shrinkage is concealed when the joint is beaded or otherwise moulded. In another assembly method, the pieces are end-matched. This method eliminates the need for mitre joints, face nailing, and the use of joints on 16-inch (410 mm) or 24-inch (610 mm) centres of conventional framing. For joining thicker materials, several tongue-and-groove joints may be used one above the other. In fine woodworking such as cabinet making, both glued dovetail joints and tongue-and-groove joints are used.