Radiation protection in the context of "Euratom"

⭐ In the context of Euratom, radiation protection is considered…

Ad spacer

⭐ Core Definition: Radiation protection

Radiation protection, also known as radiological protection, is defined by the International Atomic Energy Agency (IAEA) as "The protection of people from harmful effects of exposure to ionizing radiation, and the means for achieving this". Exposure can be from a source of radiation external to the human body or due to internal irradiation caused by the ingestion of radioactive contamination.

Ionizing radiation is widely used in industry and medicine, and can present a significant health hazard by causing microscopic damage to living tissue. There are two main categories of ionizing radiation health effects. At high exposures, it can cause "tissue" effects, also called "deterministic" effects due to the certainty of them happening, conventionally indicated by the unit gray and resulting in acute radiation syndrome. For low level exposures there can be statistically elevated risks of radiation-induced cancer, called "stochastic effects" due to the uncertainty of them happening, conventionally indicated by the unit sievert.

↓ Menu

>>>PUT SHARE BUTTONS HERE<<<

šŸ‘‰ Radiation protection in the context of Euratom

The European Atomic Energy Community (EAEC or EURATOM) is an international organization established by the Euratom Treaty of 1957 with the original purpose of creating a specialist market for nuclear power in Europe, by developing nuclear energy and distributing it to its member states while selling the surplus to non-member states. Having become one of the three European Communities alongside the European Coal and Steel Community and the European Economic Community following the merger of their executive bodies in 1967, the Euratom is de facto under the authority of the European Union (EU) but remains de jure a separate organization.

It is legally distinct from the European Union although it has the same membership, and is governed by many of the EU's institutions; but it is the only remaining community organization that is independent of the EU and therefore outside the regulatory control of the European Parliament. Over the years its scope has been increased to cover a variety of areas associated with nuclear power and ionising radiation as diverse as safeguarding of nuclear materials, radiation protection, coordinating EU members' nuclear research programmes for peaceful purposes, and construction of the International Fusion Reactor.

↓ Explore More Topics
In this Dossier

Radiation protection in the context of Non-ionizing radiation

Non-ionizing (or non-ionising) radiation refers to any type of electromagnetic radiation that does not carry enough energy per quantum (photon energy) to ionize atoms or molecules—that is, to completely remove an electron from an atom or molecule. Instead of producing charged ions when passing through matter, non-ionizing electromagnetic radiation has sufficient energy only for excitation (the movement of an electron to a higher energy state). Non-ionizing radiation is not a significant health risk except in circumstances of prolonged exposure to higher frequency non-ionizing radiation or high power densities as may occur in laboratories and industrial workplaces. Non-ionizing radiation is used in various technologies, including radio broadcasting, telecommunications, medical imaging, and heat therapy.

In contrast, ionizing radiation has a higher frequency and shorter wavelength than non-ionizing radiation, and can be a serious health hazard: exposure to it can cause burns, radiation sickness, many kinds of cancer, and genetic damage. Using ionizing radiation requires elaborate radiological protection measures, which in general are not required with non-ionizing radiation.

↑ Return to Menu

Radiation protection in the context of Absorbed dose

Absorbed dose is a dose quantity which represents the specific energy (energy per unit mass) deposited by ionizing radiation in living matter. Absorbed dose is used in the calculation of dose uptake in living tissue in both radiation protection (reduction of harmful effects), and radiation oncology (potential beneficial effects, for example in cancer treatment). It is also used to directly compare the effect of radiation on inanimate matter such as in radiation hardening.

The SI unit of measure is the gray (Gy), which is defined as one joule of energy absorbed per kilogram of matter. The older, non-SI CGS unit rad, is sometimes also used, predominantly in the USA.

↑ Return to Menu

Radiation protection in the context of Sievert

The sievert (symbol: Sv) is a derived unit in the International System of Units (SI) intended to represent the stochastic health risk of ionizing radiation, which is defined as the probability of causing radiation-induced cancer and genetic damage. The sievert is important in dosimetry and radiation protection. It is named after Rolf Maximilian Sievert, a Swedish medical physicist renowned for work on radiation dose measurement and research into the biological effects of radiation.

The sievert unit is used for radiation dose quantities such as equivalent dose and effective dose, which represent the risk of external radiation from sources outside the body, and committed dose, which represents the risk of internal irradiation due to inhaled or ingested radioactive substances. According to the International Commission on Radiological Protection (ICRP), one sievert results in a 5.5% probability of eventually developing fatal cancer based on the disputed linear no-threshold model of ionizing radiation exposure.

↑ Return to Menu

Radiation protection in the context of X-ray detector

X-ray detectors are devices used to measure the flux, spatial distribution, spectrum, and/or other properties of X-rays.

Detectors can be divided into two major categories: imaging detectors (such as photographic plates and X-ray film (photographic film), now mostly replaced by various digitizing devices like image plates or flat panel detectors) and dose measurement devices (such as ionization chambers, Geiger counters, and dosimeters used to measure the local radiation exposure, dose, and/or dose rate, for example, for verifying that radiation protection equipment and procedures are effective on an ongoing basis).

↑ Return to Menu

Radiation protection in the context of Medical physics

Medical physics deals with the application of the concepts and methods of physics to the prevention, diagnosis and treatment of human diseases with a specific goal of improving human health and well-being. Since 2008, medical physics has been included as a health profession according to International Standard Classification of Occupation of the International Labour Organization.

Although medical physics may sometimes also be referred to as biomedical physics, medical biophysics, applied physics in medicine, physics applications in medical science, radiological physics or hospital radio-physics, a "medical physicist" is specifically a health professional with specialist education and training in the concepts and techniques of applying physics in medicine and competent to practice independently in one or more of the subfields of medical physics. Traditionally, medical physicists are found in the following healthcare specialties: radiation oncology (also known as radiotherapy or radiation therapy), diagnostic and interventional radiology (also known as medical imaging), nuclear medicine, and radiation protection. Medical physics of radiation therapy can involve work such as dosimetry, linac quality assurance, and brachytherapy. Medical physics of diagnostic and interventional radiology involves medical imaging techniques such as magnetic resonance imaging, ultrasound, computed tomography and x-ray. Nuclear medicine will include positron emission tomography, Single-photon emission computed tomography, and radionuclide therapy. However one can find Medical Physicists in many other areas such as physiological monitoring, audiology, neurology, neurophysiology, cardiology and others.

↑ Return to Menu

Radiation protection in the context of United States Atomic Energy Commission

The United States Atomic Energy Commission (AEC) was an agency of the United States government established after World War II by the U.S. Congress to foster and control the peacetime development of atomic science and technology. President Harry S. Truman signed the McMahon/Atomic Energy Act on August 1, 1946, transferring the control of atomic energy from military to civilian hands, effective on January 1, 1947. This shift gave the members of the AEC complete control of the plants, laboratories, equipment, and personnel assembled during the war to produce the atomic bomb.

An increasing number of critics during the 1960s charged that the AEC's regulations were insufficiently rigorous in several important areas, including radiation protection standards, nuclear reactor safety, plant siting, and environmental protection.

↑ Return to Menu