Pump-action in the context of "Lever-action"

Play Trivia Questions online!

or

Skip to study material about Pump-action in the context of "Lever-action"

Ad spacer

>>>PUT SHARE BUTTONS HERE<<<

👉 Pump-action in the context of Lever-action

A lever action is a type of action for repeating firearms that uses a manually operated cocking handle located around the trigger guard area (often incorporating it) that pivots forward to move the bolt via internal linkages, which will feed and extract cartridges into and out of the chamber, and cock the firing pin mechanism. This contrasts to other type of repeating actions such as the bolt-action, pump-action, semi-automatic, fully automatic, and/or burst mode actions. A firearm using this operating mechanism is colloquially referred to as a levergun.

Most lever-action firearms are rifles, but some lever-action shotguns and a few pistols have been made. The Winchester Model 1873 rifle is one of the most famous lever-action firearms, but many manufacturers (notably Henry Repeating Arms and Marlin Firearms) also produce lever-action rifles. Colt produced the 6403 lever-action Colt-Burgess rifles from 1883 until 1885 and Mossberg formerly produced the Model 464 rifle.

↓ Explore More Topics
In this Dossier

Pump-action in the context of Repeating rifle

A repeating rifle is a single-barreled rifle capable of repeated discharges between each ammunition reload. This is typically achieved by having multiple cartridges stored in a magazine (within or attached to the rifle) and then fed individually into the chamber by a reciprocating bolt, via either a manual or automatic action mechanism, while the act of chambering the round typically also recocks the hammer/striker for the following shot. In common usage, the term "repeating rifle" most often refers specifically to manual repeating rifles (e.g. lever-action, pump-action, bolt-action, etc.), as opposed to self-loading rifles, which use the recoil, gas, or blowback of the previous shot to cycle the action and load the next round, even though all self-loading firearms are technically a subcategory of repeating firearms.

Repeating rifles were a significant advance over the preceding single-shot, breechloading rifles when used for military combat, as they allowed a much greater rate of fire. The repeating Henry rifle was used by the infantry and Spencer rifle was used by the cavalry during the American Civil War and the subsequent American Indian Wars, and the first repeating air rifle to see military service was the Windbüchse rifle.

↑ Return to Menu

Pump-action in the context of Action (firearms)

In firearms terminology, an action is the functional mechanism of a breechloading firearm that handles (loads, locks, fires, extracts, and ejects) the ammunition cartridges, or the method by which that mechanism works. Actions are technically not present on muzzleloaders, as all those are single-shot firearms with a closed off breech with the powder and projectile manually loaded from the muzzle. Instead, the muzzleloader ignition mechanism is referred to as the lock (e.g. matchlock, wheellock, flintlock, and caplock).

Actions can be categorized in several ways, including single action versus double action, break action versus lever-action, pump-action, bolt-action, among many other types. The term action can also include short, long, and magnum if it is in reference to the length of the rifle's receiver and the length of the bolt. The short action rifle usually can accommodate a cartridge length of 2.8 in (71 mm) or smaller. The long action rifle can accommodate a cartridge of 3.34 in (85 mm), and the magnum action rifle can accommodate cartridges of 3.6 in (91 mm).

↑ Return to Menu

Pump-action in the context of Magazine (firearms)

A magazine, often simply called a mag, is an ammunition storage and feeding device for a repeating firearm, either integral within the gun (internal or fixed magazine) or externally attached (detachable magazine). The magazine functions by holding several cartridges within itself and sequentially pushing each one into a position where it may be readily loaded into the barrel chamber by the firearm's moving action. The detachable magazine is sometimes colloquially referred to as a "clip," although this is technically inaccurate since a clip is actually an accessory device used to help load ammunition into the magazine or cylinder of a firearm.

Magazines come in many different shapes and sizes from integral tubular magazines on lever-action and pump-action rifles and shotguns that may hold more than 5 rounds to detachable box magazines and drum magazines for automatic rifles and light machine guns that may hold more than 50 rounds. Various jurisdictions ban what they define as "high-capacity magazines".

↑ Return to Menu