Packet switching in the context of Virtual circuit


Packet switching in the context of Virtual circuit

Packet switching Study page number 1 of 2

Play TriviaQuestions Online!

or

Skip to study material about Packet switching in the context of "Virtual circuit"


⭐ Core Definition: Packet switching

In telecommunications, packet switching is a method of grouping data into short messages in fixed format, i.e., packets, that are transmitted over a telecommunications network. Packets consist of a header and a payload. Data in the header is used by networking hardware to direct the packet to its destination, where the payload is extracted and used by an operating system, application software, or higher layer protocols. Packet switching is the primary basis for data communications in computer networks worldwide.

During the early 1960s, American engineer Paul Baran developed a concept he called distributed adaptive message block switching as part of a research program at the RAND Corporation, funded by the United States Department of Defense. His proposal was to provide a fault-tolerant, efficient method for communication of voice messages using low-cost hardware to route the message blocks across a distributed network. His ideas contradicted then-established principles of pre-allocation of network bandwidth, exemplified by the development of telecommunications in the Bell System. The new concept found little resonance among network implementers until the independent work of Welsh computer scientist Donald Davies at the National Physical Laboratory beginning in 1965. Davies developed the concept for data communication using software switches in a high-speed computer network and coined the term packet switching. His work inspired numerous packet switching networks in the decade following, including the incorporation of the concept into the design of the ARPANET in the United States and the CYCLADES network in France. The ARPANET and CYCLADES were the primary precursor networks of the modern Internet.

↓ Menu
HINT:

👉 Packet switching in the context of Virtual circuit

A virtual circuit (VC) is a means of transporting data over a data network, based on packet switching and in which a connection is first established across the network between two endpoints. The network, rather than having a fixed data rate reservation per connection as in circuit switching, takes advantage of the statistical multiplexing on its transmission links, an intrinsic feature of packet switching.

A 1978 standardization of virtual circuits by the CCITT imposes per-connection flow controls at all user-to-network and network-to-network interfaces. This permits participation in congestion control and reduces the likelihood of packet loss in a heavily loaded network. Some circuit protocols provide reliable communication service through the use of data retransmissions invoked by error detection and automatic repeat request (ARQ).

↓ Explore More Topics
In this Dossier

Packet switching in the context of History of the Internet

The history of the Internet originated in the efforts of scientists and engineers to build and interconnect computer networks. The Internet Protocol Suite, the set of rules used to communicate between networks and devices on the Internet, arose from research and development in the United States and involved international collaboration, particularly with researchers in the United Kingdom and France.

Computer science was an emerging discipline in the late 1950s that began to consider time-sharing between computer users, and later, the possibility of achieving this over wide area networks. J. C. R. Licklider developed the idea of a universal network at the Information Processing Techniques Office (IPTO) of the United States Department of Defense (DoD) Advanced Research Projects Agency (ARPA). Independently, Paul Baran at the RAND Corporation proposed a distributed network based on data in message blocks in the early 1960s, and Donald Davies conceived of packet switching in 1965 at the National Physical Laboratory (NPL), proposing a national commercial data network in the United Kingdom.

View the full Wikipedia page for History of the Internet
↑ Return to Menu

Packet switching in the context of Telecommunication network

A telecommunications network is a group of nodes interconnected by telecommunications links that are used to exchange messages between the nodes. The links may use a variety of technologies based on the methodologies of circuit switching, message switching, or packet switching, to pass messages and signals.

Multiple nodes may cooperate to pass the message from an originating node to the destination node, via multiple network hops. For this routing function, each node in the network is assigned a network address for identification and locating it on the network. The collection of addresses in the network is called the address space of the network.

View the full Wikipedia page for Telecommunication network
↑ Return to Menu

Packet switching in the context of Paul Baran

Paul Baran (born Pesach Baran /ˈbærən/; April 29, 1926 – March 26, 2011) was a Polish-American engineer who was a pioneer in the development of computer networks. He was one of the two independent inventors of packet switching, which is today the dominant basis for data communications in computer networks worldwide, and went on to start several companies and develop other technologies that are an essential part of modern digital communication.

View the full Wikipedia page for Paul Baran
↑ Return to Menu

Packet switching in the context of Donald Davies

Donald Watts Davies, CBE FRS (7 June 1924 – 28 May 2000) was a British computer scientist and Internet pioneer who was employed at the UK National Physical Laboratory (NPL).

During 1965-67 he invented modern data communications, including packet switching, high-speed routers, layered communication protocols, hierarchical computer networks and the essence of the end-to-end principle, concepts that are used today in computer networks worldwide. He envisioned, in 1966, that there would be a "single network" for data and telephone communications. Davies proposed and studied a commercial national data network in the United Kingdom and designed and built the first implementation of packet switching in the local-area NPL network in 1966-69 to demonstrate the technology. Many of the wide-area packet-switched networks built in the late 1960s and 1970s were similar "in nearly all respects" to his original 1965 design. Davies' work influenced the ARPANET in the United States and the CYCLADES project in France, and was key to the development of the data communications technology used in Internet, which is a network of networks.

View the full Wikipedia page for Donald Davies
↑ Return to Menu

Packet switching in the context of National Physical Laboratory (United Kingdom)

The National Physical Laboratory (NPL) is the national measurement standards laboratory of the United Kingdom. It sets and maintains physical standards for British industry.

Founded in 1900, the NPL is one of the oldest metrology institutes in the world. Research and development work at the laboratory has contributed to the advancement of many disciplines of science, including the development of early computers in the late 1940s and 1950s, construction of the first accurate atomic clock in 1955, and the invention and first implementation of packet switching in the 1960s, which is today one of the fundamental technologies of the Internet. The former heads of NPL include many individuals who were pillars of the British scientific establishment.

View the full Wikipedia page for National Physical Laboratory (United Kingdom)
↑ Return to Menu

Packet switching in the context of Network packet

In telecommunications and computer networking, a network packet is a formatted unit of data carried by a packet-switched network. A packet consists of control information and user data; the latter is also known as the payload. Control information provides data for delivering the payload (e.g., source and destination network addresses, error detection codes, or sequencing information). Typically, control information is found in packet headers and trailers.

In packet switching, the bandwidth of the transmission medium is shared between multiple communication sessions, in contrast to circuit switching, in which circuits are preallocated for the duration of one session and data is typically transmitted as a continuous bit stream.

View the full Wikipedia page for Network packet
↑ Return to Menu

Packet switching in the context of EVDO

Evolution-Data Optimized (EV-DO, EVDO, etc.) is a telecommunications standard for the wireless transmission of data through radio signals, typically for broadband Internet access. EV-DO is an evolution of the CDMA2000 (IS-2000) standard which supports high data rates and can be deployed alongside a wireless carrier's voice services. It uses advanced multiplexing techniques including code-division multiple access (CDMA) as well as time-division multiplexing (TDM) to maximize throughput. It is a part of the CDMA2000 family of standards and has been adopted by many mobile phone service providers around the world particularly those previously employing CDMA networks. It is also used on the Globalstar satellite phone network.

An EV-DO channel has a bandwidth of 1.25 MHz, the same bandwidth size that IS-95A (IS-95) and IS-2000 (1xRTT) use, though the channel structure is very different. The back-end network is entirely packet-based, and is not constrained by restrictions typically present on a circuit switched network.

View the full Wikipedia page for EVDO
↑ Return to Menu

Packet switching in the context of Connectionless communication

Connectionless communication, often referred to as CL-mode communication, is a data transmission method used in packet switching networks, using data packets that are frequently called datagrams, in which each data packet is individually addressed and routed based on information carried in each packet, rather than in the setup information of a prearranged, fixed data channel as in connection-oriented communication. Connectionless protocols are usually described as stateless protocols, the Internet Protocol (IP) and User Datagram Protocol (UDP) are examples.

View the full Wikipedia page for Connectionless communication
↑ Return to Menu

Packet switching in the context of Circuit switched

Circuit switching is a method of implementing a telecommunications network in which two network nodes establish a dedicated communications channel (circuit) through the network before the nodes may communicate. The circuit guarantees the full bandwidth of the channel and remains connected for the duration of the communication session. The circuit functions as if the nodes were physically connected as with an electrical circuit.

Circuit switching originated in analog telephone networks where the network created a dedicated circuit between two telephones for the duration of a telephone call. It contrasts with message switching and packet switching used in modern digital networks in which the trunklines between switching centres carry data between many different nodes in the form of data packets without dedicated circuits.

View the full Wikipedia page for Circuit switched
↑ Return to Menu

Packet switching in the context of Message switching

In telecommunications, message switching involves messages routed in their entirety, one hop at a time. It evolved from circuit switching and was the precursor of packet switching.

An example of message switching is email in which the message is sent through different intermediate servers to reach the mail server for storing. Unlike packet switching, the message is not divided into smaller units and sent independently over the network.

View the full Wikipedia page for Message switching
↑ Return to Menu

Packet switching in the context of NPL network

The NPL network, or NPL Data Communications Network, was a local area computer network operated by the National Physical Laboratory (NPL) in London that pioneered the concept of packet switching.

Based on designs conceived by Donald Davies in 1965, development work began in 1966. Construction began in 1968 and elements of the first version of the network, the Mark I, became operational in early 1969 then fully operational in January 1970. The Mark II version operated from 1973 until 1986. The NPL network was the first computer network to implement packet switching and the first to use high-speed links. Its original design, along with the innovations implemented in the ARPANET and the CYCLADES network, laid down the technical foundations of the modern Internet.

View the full Wikipedia page for NPL network
↑ Return to Menu

Packet switching in the context of CYCLADES

The CYCLADES computer network (French pronunciation: [siklad]) was a French research network created in the early 1970s. It was one of the pioneering networks experimenting with the concept of packet switching and, unlike the ARPANET, was explicitly designed to facilitate internetworking.

The CYCLADES network was the first to make the hosts responsible for the reliable delivery of data, rather than this being a centralized service of the network itself. Datagrams were exchanged on the network using transport protocols that do not guarantee reliable delivery, but only attempt best-effort. To empower the network leaves the hosts to perform error-correction, the network ensured end-to-end protocol transparency, a concept later to be known as the end-to-end principle. This simplified network design, reduced network latency, and reduced the opportunities for single point failures. The experience with these concepts led to the design of key features of the Internet Protocol in the ARPANET project.

View the full Wikipedia page for CYCLADES
↑ Return to Menu