Motor fuel in the context of "Heat engine"

A filling station (also known as a gas station [US] or petrol station [UK/AU]) is a facility that sells fuel and engine lubricants for motor vehicles. It serves as a local fuel depot and retailer who receive fuel products from refineries (via regular tank truck resupplies), keep the fuels in (typically underground) storage tanks, and distribute individual product to motorist consumers at a daily varied price.

The most common fuels sold are motor fuels such as gasoline (a.k.a. petrol, often as multiple products according to different octane ratings) and diesel fuel, as well as liquified petroleum gas (LPG, i.e. autogas), compressed natural gas, compressed hydrogen, hydrogen compressed natural gas, liquid hydrogen, kerosene, alcohol fuels (like methanol, ethanol, butanol, and propanol), biofuels (like straight vegetable oil and biodiesel), or other types of alternative fuels. Fuel dispensers are used to pump fuel into the fuel tanks within vehicles, gauge the volume of fuel transferred to the vehicle, and calculate the financial cost the consumer must pay. Besides fuel pumps, another significant device found in filling stations and capable of refueling certain (compressed-air) vehicles is an air compressor. However, these are generally used to inflate car tires.

Heating oil is any petroleum product or other oil used for heating; it is a fuel oil. Most commonly, it refers to low viscosity grades of fuel oil used for furnaces or boilers for home heating and in other buildings. Home heating oil is often abbreviated as HHO.

Most heating oil products are chemically very similar to diesel fuel used as motor fuel; motor fuel is typically subject to higher fuel taxes. Many countries add fuel dyes to heating oil, allowing law enforcement to check if a driver is evading fuel taxes. Since 2002, Solvent Yellow 124 has been added as a "Euromarker" in the European Union; untaxed diesel is known as "red diesel" in the United Kingdom.

A by-product or byproduct is a secondary product derived from a production process, manufacturing process or chemical reaction; it is not the primary product or service being produced.

A by-product can be useful and marketable or it can be considered waste: for example, bran, which is a byproduct of the milling of wheat into refined flour, is sometimes composted or burned for disposal, but in other cases, it can be used as a nutritious ingredient in human food or animal feed. Gasoline was once a byproduct of oil refining that later became a desirable commercial product as motor fuel. The plastic used in plastic shopping bags also started as a by-product of oil refining. By-products are sometimes called co-products to indicate that although they are secondary, they are desired products. For example, hides and leather may be called co-products of beef production. There is no strict distinction between by-products and co-products.

Fuel oil is any of various fractions obtained from the distillation of petroleum (crude oil). Such oils include distillates (the lighter fractions) and residues (the heavier fractions). Fuel oils include heavy fuel oil (bunker fuel), marine fuel oil (MFO), furnace oil (FO), gas oil (gasoil), heating oils (such as home heating oil), diesel fuel, and others.

The term fuel oil generally includes any liquid fuel that is burned in a furnace or boiler to generate heat (heating oils), or used in an engine to generate power (as motor fuels). However, it does not usually include other liquid oils, such as those with a flash point of approximately 42 °C (108 °F), or oils burned in cotton- or wool-wick burners. In a stricter sense, fuel oil refers only to the heaviest commercial fuels that crude oil can yield, that is, those fuels heavier than gasoline (petrol) and naphtha.

Fuel efficiency (or fuel economy) is a form of thermal efficiency, meaning the ratio of effort to result of a process that converts chemical potential energy contained in a carrier (fuel) into kinetic energy or work. Overall fuel efficiency may vary per device, which in turn may vary per application, and this spectrum of variance is often illustrated as a continuous energy profile. Non-transportation applications, such as industry, benefit from increased fuel efficiency, especially fossil fuel power plants or industries dealing with combustion, such as ammonia production during the Haber process.

In the context of transport, fuel economy is the energy efficiency of a particular vehicle, given as a ratio of distance traveled per unit of fuel consumed. It is dependent on several factors including engine efficiency, transmission design, and tire design. In most countries, using the metric system, fuel economy is stated as "fuel consumption" in liters per 100 kilometers (L/100 km) or kilometers per liter (km/L or kmpl). In a number of countries still using other systems, fuel economy is expressed in miles per gallon (mpg), for example in the US and usually also in the UK (imperial gallon); there is sometimes confusion as the imperial gallon is 20% larger than the US gallon so that mpg values are not directly comparable. Traditionally, litres per mil were used in Norway and Sweden, but both have aligned to the EU standard of L/100 km.

Marine diesel oil (MDO) is a type of distillate diesel oil. Marine diesel oil is also called distillate marine diesel. MDO is widely used as motor fuel by medium speed and medium/high speed marine diesel engines. It is also used in the larger low speed and medium speed propulsion engine which normally burn residual fuel. Those fuels result from a catalytic cracking and visbreaking refinery. Marine diesel oil has been condemned for its high sulfur content, so many countries and organizations established regulations and laws on MDO use. Due to its lower price compared to more refined fuel, MDO is favored particularly by the shipping industry.