Light crude oil in the context of "Petroleum industry in Canada"

Play Trivia Questions online!

or

Skip to study material about Light crude oil in the context of "Petroleum industry in Canada"

Ad spacer

>>>PUT SHARE BUTTONS HERE<<<

👉 Light crude oil in the context of Petroleum industry in Canada

Petroleum production in Canada is a major industry which is important to the overall economy of North America. Canada has the third largest oil reserves in the world and is the world's fourth largest oil producer and fourth largest oil exporter. In 2019 it produced an average of 750,000 cubic metres per day (4.7 Mbbl/d) of crude oil and equivalent. Of that amount, 64% was upgraded from unconventional oil sands, and the remainder light crude oil, heavy crude oil and natural-gas condensate. Most of the Canadian petroleum production is exported, approximately 600,000 cubic metres per day (3.8 Mbbl/d) in 2019, with 98% of the exports going to the United States. Canada is by far the largest single source of oil imports to the United States, providing 43% of US crude oil imports in 2015.

The petroleum industry in Canada is also referred to as the "Canadian Oil Patch"; the term refers especially to upstream operations (exploration and production of oil and gas), and to a lesser degree to downstream operations (refining, distribution, and selling of oil and gas products). In 2005, almost 25,000 new oil wells were spudded (drilled) in Canada. Daily, over 100 new wells are spudded in the province of Alberta alone. Although Canada is one of the largest oil producers and exporters in the world, it also imports significant amounts of oil into its eastern provinces since its oil pipelines do not extend all the way across the country and many of its oil refineries cannot handle the types of oil its oil fields produce. In 2017 Canada imported 405,700 bbl/day (barrels per day) and exported 1,115,000 bbl/day of refined petroleum products.

↓ Explore More Topics
In this Dossier

Light crude oil in the context of Tight oil

Tight oil (also known as shale oil, shale-hosted oil or light tight oil, abbreviated LTO) is light crude oil contained in unconventional petroleum-bearing formations of low permeability, often shale or tight sandstone. Economic production from tight oil formations requires the same hydraulic fracturing and often uses the same horizontal well technology used in the production of shale gas. While sometimes called "shale oil", tight oil should not be confused with oil shale (shale rich in kerogen) or shale oil (oil produced from oil shales). Therefore, the International Energy Agency recommends using the term "light tight oil" for oil produced from shales or other very low permeability formations, while the World Energy Resources 2013 report by the World Energy Council uses the terms "tight oil" and "shale-hosted oil".

In May 2013 the International Energy Agency in its Medium-Term Oil Market Report (MTOMR) said that the North American oil production surge led by unconventional oils—US light tight oil (LTO) and Canadian oil sands—had produced a global supply shock that would reshape the way oil is transported, stored, refined and marketed.

↑ Return to Menu

Light crude oil in the context of List of oil spills

This is a reverse-chronological list of oil spills that have occurred throughout the world and spill(s) that are currently ongoing. Quantities are measured in tonnes of crude oil with one tonne roughly equal to 308 US gallons, 256 Imperial gallons, 7.33 barrels, or 1165 litres. This calculation uses a median value of 0.858 for the specific gravity of light crude oil; actual values can range from 0.816 to 0.893, so the amounts shown below are inexact. They are also estimates, because the actual volume of an oil spill is difficult to measure exactly.

↑ Return to Menu

Light crude oil in the context of Brent Crude

Brent Crude may refer to any or all of the components of the Brent Complex, a physically and financially traded oil market based around the North Sea of Northwest Europe; colloquially, Brent Crude usually refers to the price of the ICE (Intercontinental Exchange) Brent Crude Oil futures contract or the contract itself. The original Brent Crude referred to a trading classification of sweet light crude oil first extracted from the Brent oilfield in the North Sea in 1976. As production from the Brent oilfield declined to zero in 2021, crude oil blends from other oil fields have been added to the trade classification. The current Brent blend consists of crude oil produced from the Forties (added 2002), Oseberg (added 2002), Ekofisk (added 2007), Troll (added 2018) oil fields (also known as the BFOET Quotation) and oil drilled from Midland, Texas in the Permian Basin (added 2023).

The Brent Crude oil marker is also known as Brent Blend, London Brent and Brent petroleum. This grade is described as light because of its relatively low density, and sweet because of its low sulphur content.

↑ Return to Menu

Light crude oil in the context of Urals oil

Urals oil is a reference oil brand used as a basis for pricing of the Russian export oil mixture. It is a mix of heavy sour oil of the Urals and the Volga region with light oil of Western Siberia. Other reference oils are Brent, West Texas Intermediate and Dubai.

Urals brand oil is supplied through the Baku-Novorossiysk pipeline system and the Druzhba pipeline. Urals oil futures trade on Moscow Exchange. There was also an effort to trade it on NYMEX under the name of REBCO (Russian Export Blend Crude Oil).

↑ Return to Menu

Light crude oil in the context of Bonny Light

Bonny Light oil was found at Oloibiri in the Niger delta region of Nigeria in 1956 for its commercial use. Due to its features of generating high profit, it is highly demanded by refiners. Bonny light oil has an API of 32.9, classified as light oil. It is regarded as more valuable than the other oils with lower API as more high-value products are produced in the refinement. However, in Nigeria, problems due to oil spillage caused by vandalism, affects both human and the ecosystem in detrimental ways. Some experiments on animals and soil are done to figure out those impacts on organisms.

↑ Return to Menu