Inertia in the context of Inertial frame

Galileo di Vincenzo Bonaiuti de' Galilei (15 February 1564 – 8 January 1642), commonly referred to as Galileo Galilei (/ˌɡælɪˈleɪoʊ ˌɡælɪˈleɪ/ GAL-il-AY-oh GAL-il-AY, US also /ˌɡælɪˈliːoʊ -/ GAL-il-EE-oh -⁠, Italian: [ɡaliˈlɛːo ɡaliˈlɛi]) or mononymously as Galileo, was an Italian astronomer, physicist, and engineer, sometimes described as a polymath. He was born in the city of Pisa, then part of the Duchy of Florence. Galileo has been called the father of observational astronomy, modern-era classical physics, the scientific method, and modern science.

Galileo studied speed and velocity, gravity and free fall, the principle of relativity, inertia, projectile motion, and also worked in applied science and technology, describing the properties of the pendulum and "hydrostatic balances". He was one of the earliest Renaissance developers of the thermoscope and the inventor of various military compasses. With an improved telescope he built, he observed the stars of the Milky Way, the phases of Venus, the four largest satellites of Jupiter, Saturn's rings, lunar craters, and sunspots. He also built an early microscope.

Weightlessness is the complete or near-complete absence of the sensation of weight, i.e., zero apparent weight. It is also termed zero g-force, or zero-g (named after the g-force) or, incorrectly, zero gravity.

Weight is a measurement of the force on an object at rest in a relatively strong gravitational field (such as on the surface of the Earth). These weight-sensations originate from contact with supporting floors, seats, beds, scales, and the like. A sensation of weight is also produced, even when the gravitational field is zero, when contact forces act upon and overcome a body's inertia by mechanical, non-gravitational forces- such as in a centrifuge, a rotating space station, or within an accelerating vehicle.

Jean Buridan (/ˈbjʊərɪdən/; French: [byʁidɑ̃]; Latin: Johannes Buridanus; c. 1301 – c. 1359/62) was an influential 14th‑century French scholastic philosopher.

Buridan taught in the faculty of arts at the University of Paris for his entire career and focused in particular on logic and on the works of Aristotle. Buridan sowed the seeds of the Copernican Revolution in Europe. He developed the concept of impetus, the first step toward the modern concept of inertia and an important development in the history of medieval science. His name is most familiar through the thought experiment known as Buridan's ass, but the thought experiment does not appear in his extant writings.

John Philoponus (Greek: /fɪˈlɒpənəs/; Ἰωάννης ὁ Φιλόπονος, Ioánnis o Philóponos; c. 490 – c. 570), also known as John the Grammarian or John of Alexandria, was a Coptic Miaphysite philologist, Aristotelian commentator and Christian theologian from Alexandria, Byzantine Egypt, who authored a number of philosophical treatises and theological works. John Philoponus broke from the Aristotelian–Neoplatonic tradition, questioning methodology and eventually leading to empiricism in the natural sciences. He was one of the first to propose a "theory of impetus" similar to the modern concept of inertia over Aristotelian dynamics. He is also the historical founder of what is now called the Kalam cosmological argument.

Later in life Philoponus turned to Christian apologetics, arguing against the eternity of the world in his De opificio mundi, a theory which formed the basis of pagan attacks on the Christian doctrine of Creation. He also wrote on Christology, espousing a Miaphysite view. His by-name ὁ Φιλόπονος translates as "lover of toil", i.e. "diligent," referring to a miaphysite confraternity in Alexandria, the philoponoi, who were active in debating pagan (i.e. Neoplatonic) philosophers.

An anvil is a metalworking tool consisting of a large block of metal (usually forged or cast steel), with a flattened top surface, upon which another object is struck (or "worked").

Anvils are massive because the higher their inertia, the more efficiently they cause the energy of striking tools to be transferred to the work piece. In most cases the anvil is used as a forging tool. Before the advent of modern welding technology, it was the primary tool of metal workers.

In Newtonian mechanics, a centrifugal force is a kind of fictitious force (or inertial force) that appears to act on all objects when viewed in a rotating frame of reference. It appears to be directed perpendicularly from the axis of rotation of the frame. The magnitude of the centrifugal force F on an object of mass m at the perpendicular distance ρ from the axis of a rotating frame of reference with angular velocity ω is ${\textstyle F=m\omega ^{2}\rho }$.

The concept of centrifugal force simplifies the analysis of rotating devices by adopting a co-rotating frame of reference, such as in centrifuges, centrifugal pumps, centrifugal governors, and centrifugal clutches, and in centrifugal railways, planetary orbits and banked curves. The same centrifugal effect observed on rotating devices can be analyzed in an inertial reference frame as a consequence of inertia and the physical forces without invoking a centrifugal force.

Mass is an intrinsic property of a body. It was traditionally believed to be related to the quantity of matter in a body, until the discovery of the atom and particle physics. It was found that different atoms and different elementary particles, theoretically with the same amount of matter, have nonetheless different masses. Mass in modern physics has multiple definitions which are conceptually distinct, but physically equivalent. Mass can be experimentally defined as a measure of the body's inertia, meaning the resistance to acceleration (change of velocity) when a net force is applied. The object's mass also determines the strength of its gravitational attraction to other bodies.

The SI base unit of mass is the kilogram (kg). In physics, mass is not the same as weight, even though mass is often determined by measuring the object's weight using a spring scale, rather than balance scale comparing it directly with known masses. An object on the Moon would weigh less than it does on Earth because of the lower gravity, but it would still have the same mass. This is because weight is a force, while mass is the property that (along with gravity) determines the strength of this force.

In classical physics and special relativity, an inertial frame of reference (also called an inertial space or a Galilean reference frame) is a frame of reference in which objects exhibit inertia: they remain at rest or in uniform motion relative to the frame until acted upon by external forces. In such a frame, the laws of nature can be observed without the need to correct for acceleration.

All frames of reference with zero acceleration are in a state of constant rectilinear motion (straight-line motion) with respect to one another. In such a frame, an object with zero net force acting on it, is perceived to move with a constant velocity, or, equivalently, Newton's first law of motion holds. Such frames are known as inertial. Some physicists, like Isaac Newton, originally thought that one of these frames was absolute — the one approximated by the fixed stars. However, this is not required for the definition, and it is now known that those stars are in fact moving, relative to one another.

A drive shaft, driveshaft, driving shaft, tailshaft (Australian English), propeller shaft (prop shaft), or Cardan shaft (after Girolamo Cardano) is a component for transmitting mechanical power, torque, and rotation, usually used to connect other components of a drivetrain that cannot be connected directly because of distance or the need to allow for relative movement between them.

As torque carriers, drive shafts are subject to torsion and shear stress, equivalent to the difference between the input torque and the load. They must therefore be strong enough to bear the stress, while avoiding too much additional weight as that would in turn increase their inertia.

The teapot effect, also known as dribbling, is a fluid dynamics phenomenon that occurs when a liquid being poured from a container runs down the spout or the body of the vessel instead of flowing out in an arc.

Markus Reiner coined the term "teapot effect" in 1956 to describe the tendency of liquid to dribble down the side of a vessel while pouring. Reiner received his PhD at TU Wien in 1913 and made significant contributions to the development of the study of flow behavior known as rheology. Reiner believed the teapot effect could be explained by Bernoulli's principle, which states that an increase in the speed of a fluid is always accompanied by a decrease in its pressure. When tea is poured from a teapot, the liquid's speed increases as it flows through the narrowing spout. This decrease in pressure was what Reiner thought to cause the liquid to dribble down the side of the pot.However, a 2021 study found the primary cause of the phenomenon to be an interaction of inertia and capillary forces. The study found that the smaller the angle between the container wall and the liquid surface, the more the teapot effect is slowed down.

In physics, a mechanical wave is a wave that is an oscillation of matter, and therefore transfers energy through a material medium. Vacuum is, from classical perspective, a non-material medium, where electromagnetic waves propagate.

While waves can move over long distances, the movement of the medium of transmission—the material—is limited. Therefore, the oscillating material does not move far from its initial equilibrium position. Mechanical waves can be produced only in media which possess elasticity and inertia. There are three types of mechanical waves: transverse waves, longitudinal waves, and surface waves. Some of the most common examples of mechanical waves are water waves, sound waves, and seismic waves.

A sling is a projectile weapon typically used to hand-throw a blunt projectile such as a stone, clay, or lead "sling-bullet". It is also known as the shepherd's sling or slingshot (in British English, although elsewhere it means something else). Someone who specializes in using slings is called a slinger.

A sling has a small cradle or pouch in the middle of two retention cords, where a projectile is placed. There is a loop on the end of one side of the retention cords. Depending on the design of the sling, either the middle finger or the wrist is placed through a loop on the end of one cord, and a tab at the end of the other cord is placed between the thumb and forefinger. The sling is swung in an arc, and the tab released at a precise moment. This action releases the projectile to fly inertially and ballistically towards the target. By its double-pendulum kinetics, the sling enables stones (or spears) to be thrown much further than they could be by hand alone.