Groundbait in the context of "Hookbait"

Recreational fishing, also called sport fishing or game fishing, is fishing for leisure, exercise or competition. It can be contrasted with commercial fishing, which is occupational fishing activities done for profit; or subsistence fishing, which is fishing for survival and livelihood.

The most common form of recreational fishing is angling, which is done with a rig of rod, reel, line, hooks and any one of a wide range of baits, as well as other complementary devices such as weights, floats, swivels and method feeders, collectively referred to as terminal tackles. Lures are frequently used instead of fresh bait when fishing for predatory fishes. Some hobbyists hand-make custom tackles themselves, including plastic lures and artificial flies.

Angling (from Old English angol, meaning "hook") is a fishing technique that uses a fish hook attached to a fishing line to tether individual fish in the mouth. The fishing line is usually manipulated with a fishing rod, although rodless techniques such as handlining also exist. Modern angling rods are usually fitted with a fishing reel that functions as a cranking device for storing, retrieving and releasing out the line, although Tenkara fishing and traditional cane pole fishing are two rod-angling methods that do not use any reel. The fish hook itself can be additionally weighted with a denser tackle called a sinker, and is typically dressed with an appetizing bait (i.e. hookbait) to attract and entice the fish into swallowing the hook, but sometimes an inedible fake/imitation bait with multiple attached hooks (known as a lure) is used instead of a single hook with edible bait. Some type of bite indicator, such as a float, a bell or a quiver tip, is often used to relay underwater status of the hook to the surface and alert the angler of a fish's presence.

When angling, the fisherman (known as the angler) will first throw the hook (i.e. "cast") to a chosen area of water (i.e. fishing ground), and then patiently wait for fish to approach and devour the hookbait. It is also not uncommon for the angler to scatter some loose bait (groundbait) around the target area before even casting the hook, to better attract distant fish with scents. If a fish has succumbed to its own feeding instinct and swallowed the baited hook (i.e. "bite" or "strike"), the hook point will likely pierce into and anchor itself inside the fish jaw, gullet or gill, and the fish in turn becomes firmly tethered by the fishing line. Once the fish is hooked (often colloquially called "fish-on"), any struggles and attempts to escape will pull along the line, causing the bite indicator to signal the angler, who jerks the fishing rod back to further deepen the hook anchorage (i.e. "setting the hook") and then tries to retrieve the line back, pulling the fish closer in the process. During the line retrieval, the angler will carefully monitor the line and rod tension to avoid equipment breaking. With stronger and feistier fish, the angler might need to temporarily halt or even reverse the line retrieval to prolong the struggle time and tire out the fish (i.e. "walking" the fish), before dragging it near enough to eventually lift it out of the water (known as "landing") for a successful catch. Sometimes a hand net (or "landing net") or a long-handled hook is used to make fetching the fish easier.

A fishing rod or fishing pole is a long, thin rod used by anglers to catch fish by manipulating a line ending in a hook (formerly known as an angle, hence the term "angling"). At its most basic form, a fishing rod is a straight rigid stick/pole with a line fastened to one end (as seen in traditional bamboo rod fishing such as Tenkara fishing); however, modern rods are usually more elastic and generally have the line stored in a reel mounted at the rod handle, which is hand-cranked and controls the line retrieval, as well as numerous line-restricting rings (also known as line guides) that distribute bending stress along the rod and help dampening down/prevent line whipping and entanglement. To better entice fish, baits or lures are dressed onto the hook attached to the line, and a bite indicator (e.g. a float) is typically used, some of which (e.g. quiver tip) might be incorporated as part of the rod itself.

Fishing rods act as an extended lever and allow the angler to amplify line movements while luring and pulling the fish. It also enhances casting distance by increasing the launch speed of the terminal tackles (the hook, bait/lure, and other accompanying attachments such as float and sinker/feeder), as a longer swing radius (compared to that of a human arm) corresponds to greater arc speed at the tip under the same angular velocity. The length of fishing rods usually vary between 0.6 m (2 ft) and 4.6 m (15 ft) depending on the style of angling, while the Guinness World Record is 22.45 m (73 ft 7.9 in).

Fishing tackle is the equipment used by anglers when fishing. Almost any equipment or gear used in fishing can be called fishing tackle, examples being hooks, lines, baits/lures, rods, reels, floats, sinkers/feeders, nets, spears, gaffs and traps, as well as wires, snaps, beads, spoons, blades, spinners, clevises and tools that make it easy to tie knots.

Tackle attached to the end of a fishing line that gets cast out along with the bait are referred to as terminal tackle. Terminal tackle can include hooks, leaders, floats, sinkers/feeders, swivels and attached snaps and/or split rings. Sometimes the term "rig" is used for a specific assemblage of terminal tackle.

Fishing bait is any luring substance used specifically to attract and catch fish, typically when angling with a hook and line. There are generally two types of baits used in angling: hookbaits, which are directly mounted onto fish hooks and are what the term "fishing bait" typically refers to; and groundbaits, which are scattered separately into the water as an "appetizer" to attract the fish nearer to the hook. Despite the bait's sole importance is to provoke a feeding response out of the target fish, the way how fish react to different baits is quite poorly understood.

Fishing baits can be grouped into two broad categories: natural baits and artificial baits. Traditionally, fishing baits are natural food or prey items (live or dead) that are already present in the fish's normal diet (e.g. worms, insects, crustaceans and smaller bait fish), and such baits are both procured from and used within the same environment. Artificial baits, conversely, are not naturally acquired and must involve some kind of production process. These can be processed foods (e.g. bread, cheese, dough, cutlets, fish food or pet food pellets, etc.), commercially made feed mixtures (e.g. boilies), or imitative replica "fake foods" made of inedible materials known as lures (e.g plastic worm, swimbaits, spoons, stickbaits, hybrid spinners or even bionic robot fish). The variety of baits that a fisherman may choose is dictated mainly by the target species and by its habitat, as well as personal preference. Both natural and artificial baits frequently demonstrate similar efficiency if chosen adequately for the target fish. The overall bait type, size and techniques used will affect the efficiency and yield when fishing.

A fishing sinker, plummet, or knoch is a weight used in conjunction with a fishing lure or hook to increase its rate of sink, anchoring ability, and/or casting distance. Fishing sinkers may be as small as 1 gram (0.035 oz) for applications in shallow water, and even smaller for fly fishing applications, or as large as several pounds (>1 kg) or considerably more for deep sea fishing. They are formed into many different shapes for diverse fishing applications. Environmental concerns surround the usage of lead and other materials in fishing sinkers.

In fishing, casting is the act of the actively throwing a fishing tackle or rig into the water in order to deploy it. In recreational fishing, the term most commonly describes an angler launching a baited hook (or a lure) as well as other attached terminal tackles (e.g. float or sinker) out far over the water, typically by slinging a line manipulated by a long, elastic rod. The term is also used for scattering groundbaits/chums, manually throwing a hook when handlining, and setting out a net during artisanal fishing.

The basic casting technique in angling is to quickly flick/swing the rod forward towards the water, with the lagging inertia of the tackles bending the rod backward (i.e. "loading" the rod), and then use the "springing" (elastic rebound) of the rod to "hurl" and rapidly sling the line forward, which in turn will launch out the hook and bait. There are several methods anglers can use to attempt to cast farther, the most prominent of which is the shifting of body weight towards the front foot in kinematic synchrony to the forward swinging of the rod. That, combined with using a longer rod, stopping the rod swing at 45 degrees, and using correctly weighted and more aerodynamic terminal tackles, will help anglers cast farther. There are also variation techniques the anglers can use to cast the tackles more accurately to an exact location on the water or to get past potential obstacles.