Fishing rod in the context of "Recreational fishing"

Artisanal, subsistence, or traditional fishing consists of various small-scale, low-technology, fishing practices undertaken by individual fishermen (as opposed to commercial fishing). Many of these households are of coastal or island ethnic groups. These households make short (rarely overnight) fishing trips close to the shore. Their produce is usually not processed and is mainly for local consumption. Artisan fishing uses traditional fishing techniques such as rod and tackle, fishing arrows and harpoons, cast nets, and small (if any) traditional fishing boats. For that reason, socio-economic status of artisanal fishing community has become an interest of the authorities in recent years.

Artisan fishing may be undertaken for commercial, cultural and subsistence reasons. It contrasts with large-scale modern commercial fishing practices in that it is often less wasteful and less stressful on fish populations than modern industrial fishing. Target 14.b of Sustainable Development Goal 14 works to provide access rights to artisanal fishers on marine resources and markets.

Jigging is the practice of fishing with a jig, a type of weighted fishing lure. A jig consists of a heavy metal (typically lead) sinker with an attached fish hook that is usually obscured inside a soft lure or feather-like decorations. Jigs are intended to create a jerky, vertical "jumping" motion to attract fish, as opposed to other common lures like swimbaits, spoons and spinnerbaits, which move through the water more or less horizontally. The jig is very versatile and can be used in both salt and fresh water. Many deeper water fish species are attracted to the lure, which has made it popular among anglers for years.

The jigging technique mainly involves rapid lifting motions of a fishing rod, which jerk the line exert a temporarily upward pull upon the sinking lure. When the target fish is enticed to swallow the lure, the angler then sets the hook to pierce and tether the fish in the mouth. Because the jigs are weighted, a harder-than-usual hookset is often needed to overcome the added weight and provide sufficient momentum to pierce the hook point into the fish mouth. Jigging gears are often involved with the luring of slow moving fish, most commonly during spawning periods. For successful jigging, the jigger needs to use a sensitive rod that is good for feeling a strike, and needs to stay in contact with the lure and get it to where the fish are. Most fish caught by jigs are on or near the bottom.

Angling (from Old English angol, meaning "hook") is a fishing technique that uses a fish hook attached to a fishing line to tether individual fish in the mouth. The fishing line is usually manipulated with a fishing rod, although rodless techniques such as handlining also exist. Modern angling rods are usually fitted with a fishing reel that functions as a cranking device for storing, retrieving and releasing out the line, although Tenkara fishing and traditional cane pole fishing are two rod-angling methods that do not use any reel. The fish hook itself can be additionally weighted with a denser tackle called a sinker, and is typically dressed with an appetizing bait (i.e. hookbait) to attract and entice the fish into swallowing the hook, but sometimes an inedible fake/imitation bait with multiple attached hooks (known as a lure) is used instead of a single hook with edible bait. Some type of bite indicator, such as a float, a bell or a quiver tip, is often used to relay underwater status of the hook to the surface and alert the angler of a fish's presence.

When angling, the fisherman (known as the angler) will first throw the hook (i.e. "cast") to a chosen area of water (i.e. fishing ground), and then patiently wait for fish to approach and devour the hookbait. It is also not uncommon for the angler to scatter some loose bait (groundbait) around the target area before even casting the hook, to better attract distant fish with scents. If a fish has succumbed to its own feeding instinct and swallowed the baited hook (i.e. "bite" or "strike"), the hook point will likely pierce into and anchor itself inside the fish jaw, gullet or gill, and the fish in turn becomes firmly tethered by the fishing line. Once the fish is hooked (often colloquially called "fish-on"), any struggles and attempts to escape will pull along the line, causing the bite indicator to signal the angler, who jerks the fishing rod back to further deepen the hook anchorage (i.e. "setting the hook") and then tries to retrieve the line back, pulling the fish closer in the process. During the line retrieval, the angler will carefully monitor the line and rod tension to avoid equipment breaking. With stronger and feistier fish, the angler might need to temporarily halt or even reverse the line retrieval to prolong the struggle time and tire out the fish (i.e. "walking" the fish), before dragging it near enough to eventually lift it out of the water (known as "landing") for a successful catch. Sometimes a hand net (or "landing net") or a long-handled hook is used to make fetching the fish easier.

Fishing tackle is the equipment used by anglers when fishing. Almost any equipment or gear used in fishing can be called fishing tackle, examples being hooks, lines, baits/lures, rods, reels, floats, sinkers/feeders, nets, spears, gaffs and traps, as well as wires, snaps, beads, spoons, blades, spinners, clevises and tools that make it easy to tie knots.

Tackle attached to the end of a fishing line that gets cast out along with the bait are referred to as terminal tackle. Terminal tackle can include hooks, leaders, floats, sinkers/feeders, swivels and attached snaps and/or split rings. Sometimes the term "rig" is used for a specific assemblage of terminal tackle.

A fishing reel is a hand-cranked reel used in angling to wind and stow fishing line, typically mounted onto a fishing rod, but may also be used on compound bows or crossbows to retrieve tethered arrows when bowfishing.

Modern recreational fishing reels usually have fittings aiding in casting for distance and accuracy, as well as controlling the speed and tension of line retrieval to avoid line snap and hook dislodgement. Fishing reels are traditionally used for bass fishing in angling and competitive casting. They are typically attached near the handle of a fishing rod, though some specialized reels with pressure sensors for immediate retrieval are equipped on downrigger systems which are mounted directly to an ocean-going sport boat's gunwales or transoms and are used for "deep drop" and trolling.

A fishing line is any flexible, high-tensile cord used in angling to tether and pull in fish, in conjunction with at least one hook. Fishing lines are usually pulled by and stored in a reel, but can also be retrieved by hand, with a fixed attachment to the end of a rod, or via a motorized trolling outrigger.

Fishing lines generally resemble a long, ultra-thin rope, with important attributes including length, thickness, material and build. Other factors relevant to certain fishing practice include breaking strength, knot strength, UV resistance, castability, limpness, stretch, memory, abrasion resistance and visibility. Traditional fishing lines are made of silk, while most modern lines are made from synthetic polymers such as nylon, polyethylene or polyvinylidene fluoride ("fluorocarbon") and may come in monofilament or braided (multifilament) forms.

A fishing swivel is a small, usually ball- or barrel-shaped device used in angling to connect sections of fishing lines, consisting of two rings linked via a thrust bearing pivot joint. The line from the rod and reel is tied to the ring at proximal end, and the line leading to the terminal tackles (the hook, lure and/or sinker) is tied to the other ring at the distal end. Snap swivels have a safety pin-like fastener (i.e. "snap hook") linked to at least one of the rings, which allows quick detachment and interchanging of different lures.

The main purpose of the swivel is to allow the two line sections to rotate independently of each other, which allows self-unwinding of any twists formed during line casting and retrieval, preventing undesirable tanglings. This is particularly important for users of monofilament fishing lines that tend to express memory and form coils when released from a fixed-spool reel. A secondary benefit of the fishing swivel is that it may function as a stopper for sliding sinkers, which depending on fishing method may be placed before or after the swivel. Three-way swivels provide an additional ring that serves as a point of connection for side-branching line segments, which are essential for certain line and hook setups.