Float (nautical) in the context of "Nordhordland Bridge"

Play Trivia Questions online!

or

Skip to study material about Float (nautical) in the context of "Nordhordland Bridge"

Ad spacer

⭐ Core Definition: Float (nautical)

A float (also called a pontoon) is an airtight hollow structure, similar to a pressure vessel, designed to provide buoyancy in water. Its principal applications are in watercraft hulls, aircraft floats, floating piers, aquaculture, pontoon bridges, and marine engineering applications such as salvage.

↓ Menu

>>>PUT SHARE BUTTONS HERE<<<

👉 Float (nautical) in the context of Nordhordland Bridge

The Nordhordland Bridge (Norwegian: Nordhordlandsbrua) is a combined cable-stayed and pontoon bridge which crosses Salhusfjorden between Klauvaneset (in Bergen Municipality) and the island of Flatøy (in Alver Municipality) in Vestland county, Norway. It is 1,614 meters (5,295 ft) long, of which the pontoon section is 1,246 meters (4,088 ft) long. The cable-stayed section consists of a single 99-meter (325 ft) tall H-pylon which has a length of 368 meters (1,207 ft) and a main span of 172 meters (564 ft). This allows for a clearance of 32 meters (105 ft).

The floating section is a steel box girder bridge with ten pontoons, which because of the fjord's depth are not laterally anchored. The roadway sits on an orthotropic deck. The pontoons and the cable-stayed bridge are built in concrete, with the main span being supported with 48 cables. The fjord end of the main span is supported by a 30-meter (98 ft) deep foundation, where the two bridges meet. From there and for 414 meters (1,358 ft), the roadwall has a 5.7 percent gradient on a viaduct anchored to the pontoon bridge.

↓ Explore More Topics
In this Dossier

Float (nautical) in the context of Pontoon bridge

A pontoon bridge (or ponton bridge), also known as a floating bridge, is a bridge that uses floats or shallow-draft boats to support a continuous deck for pedestrian and vehicle travel. The buoyancy of the supports limits the maximum load that they can carry.

Most pontoon bridges are temporary and used in wartime and civil emergencies. There are permanent pontoon bridges in civilian use that can carry highway traffic; generally, the relatively high potential for collapse and sinking (e.g. due to waves and collisions) and high continuous maintenance costs makes pontoons unattractive for most civilian construction. Permanent floating bridges are useful for sheltered water crossings if it is not considered economically feasible to suspend a bridge from anchored piers (such as in deep water). Such bridges can require a section that is elevated or can be raised or removed to allow waterborne traffic to pass. Notable permanent pontoon bridges include the Hood Canal Bridge and the Nordhordland Bridge.

↑ Return to Menu

Float (nautical) in the context of Aircraft catapult

An aircraft catapult is an acceleration device used to help fixed-wing aircraft reach liftoff speed (VLOF) faster during takeoff, typically when trying to take off from a very short runway, as otherwise the aircraft engines alone cannot get the aircraft to sufficient airspeed quickly enough for the wings to generate the lift needed to sustain flight. Launching via catapults enables aircraft that typically are only capable of conventional takeoffs, especially heavier aircraft with significant payloads, to perform short takeoffs from the roll distances of light aircraft. Catapults are usually used on the deck of a ship — such as the flight deck of an aircraft carrier — as a form of assisted takeoff for navalised aircraft, but can also be installed on land-based runways, although this is rare.

Historically it was most common for seaplanes (which have pontoons instead of wheeled landing gears and thus cannot utilize runways) to be catapulted from ships onto nearby water for takeoff, allowing them to conduct aerial reconnaissance missions and be crane-hoisted back on board during retrieval, although by the late First World War their roles are largely supplanted by the more versatile biplanes that can take off and land on carrier decks unassisted. During the Second World War before the advent of escort carriers, monoplane fighter aircraft (notably the Hawker Hurricane) would sometimes be catapulted from "catapult-equipped merchant" (CAM) vessels for one-way sorties to repel enemy aircraft harassing shipping lanes, forcing the returning pilot to either divert to a land-based airstrip, jump out by parachute, or ditch in the water near the convoy and wait for rescue. By the time fleet carriers became the norm in WW2, catapult launches have become largely unnecessary and carrier-based fighter-bombers would routinely perform self-powered takeoffs and landings off and onto carrier decks, especially during the naval aviation-dominated Pacific War between the United States and the Empire of Japan. However, escalating arms races during the Cold War accelerated the adoption of the heavier jet aircraft for naval operations, thus motivating the development of new catapult systems, especially after the popularization of angled flight decks further limited the practical distance available as takeoff runways. Nowadays, jet aircraft can launch from aircraft carriers via either catapults or ski-jump deck, and perform optics-assisted landing onto the same ship with help from decelerative arresting gears.

↑ Return to Menu

Float (nautical) in the context of Raft

A raft is any flat structure for support or transportation over water. It is usually of basic design, characterized by the absence of a hull. Rafts are usually kept afloat by using any combination of buoyant materials such as wood, sealed barrels, or inflated air chambers (such as pontoons), and are typically not propelled by an engine. Rafts are an ancient mode of transport; naturally occurring rafts such as entwined vegetation and pieces of wood have been used to traverse water since the dawn of humanity.

↑ Return to Menu

Float (nautical) in the context of Landing gear

Landing gear is the undercarriage of an aircraft or spacecraft that is used for engaging the surface — typically land, but may also be the surface of a water body — when parking, taxiing, takeoff or landing. It was also formerly called alighting gear by some manufacturers, such as the Glenn L. Martin Company. For aircraft, Stinton makes the terminology distinction undercarriage (British) = landing gear (US).

For aircraft, landing gear is the foundational part of airframe that supports the craft's weight when it is not in flight, keeping the fuselage at a clearance off the ground so it can avoid sustaining frictional/collisional damages. Wheeled landing gear is the most ubiquitous, used in almost all aircraft that perform conventional and short takeoff and landing, while skids or floats are used in aircraft that can take off and land vertically or operate from snow/ice/water. Landing gears from early aircraft are usually fixed, and remain protruded under the aircraft during flight, with no or only partial fairing coverage to reduce drag; while most modern aircraft have retractable undercarriages that fold into the fuselage during flight, which maximizes aerodynamic streamlining and allows for faster airspeeds and smoother flight control.

↑ Return to Menu

Float (nautical) in the context of Vought-Sikorsky VS-300

The Vought-Sikorsky VS-300 (or S-46) is an American single-engine helicopter designed by Igor Sikorsky. It had a single three-blade rotor originally powered by a 75 horsepower (56 kW) engine. The first "free" flight of the VS-300 was on 13 May 1940. The VS-300 was the first successful single lifting rotor helicopter in the United States and the first successful helicopter to use a single vertical-plane tail rotor configuration for antitorque. With floats attached, it became the first practical amphibious helicopter.

↑ Return to Menu

Float (nautical) in the context of Floating dock (jetty)

A floating dock, floating pier or floating jetty is a platform or ramp supported by pontoons. It is usually joined to the shore with a gangway. The pier is usually held in place by vertical poles referred to as pilings, which are embedded in the seafloor or by anchored cables. Frequently used in marinas, this type of pier maintains a fixed vertical relationship to watercraft secured to it, independent of tidal, river or lake elevation. The angle of the gangway varies with the water level.

↑ Return to Menu