Fire point in the context of "Flash point"

Play Trivia Questions online!

or

Skip to study material about Fire point in the context of "Flash point"




⭐ Core Definition: Fire point

The fire point, or combustion point, of a fuel is the lowest temperature at which the liquid fuel will continue to burn for at least five seconds after ignition by an open flame of standard dimension. At the flash point, a lower temperature, a substance will ignite briefly, but vapour might not be produced at a rate to sustain the fire. Most tables of material properties will only list material flash points. In general, the fire point can be assumed to be about 10 °C higher than the flash point, although this is no substitute for testing if the fire point is safety critical.

Testing of the fire point is done by open cup apparatus.

↓ Menu

👉 Fire point in the context of Flash point

The flash point of a material is the "lowest liquid temperature at which, under certain standardized conditions, a liquid gives off vapours in a quantity such as to be capable of forming an ignitable vapour/air mixture".

The flash point is sometimes confused with the autoignition temperature, the temperature that causes spontaneous ignition. The fire point is the lowest temperature at which the vapors keep burning after the ignition source is removed. It is higher than the flash point, because at the flash point vapor may not be produced fast enough to sustain combustion. Neither flash point nor fire point depends directly on the ignition source temperature, but ignition source temperature is far higher than either the flash or fire point, and can increase the temperature of fuel above the usual ambient temperature to facilitate ignition.

↓ Explore More Topics
In this Dossier

Fire point in the context of Smoke point

The smoke point, also referred to as the burning point, is the temperature at which an oil or fat begins to produce a continuous bluish smoke that becomes clearly visible, dependent upon specific and defined conditions. This happens when one or multiple substances in the oil start to chemically react with oxygen and burn, which can include the oil itself, proteins, sugars, or other organic material. It is distinct from the flash point and fire point, which denote the temperatures at which the oil itself (specifically, vaporized oil, which is distinct from the smoke produced at the smoke point) begins to burn.

Smoke point values can vary greatly. The most important factor determining the smoke point of an oil is the amount of proteins and free fatty acids (FFAs). Higher quantities of these lower the smoke point. The FFA content typically represents less than 1% of the total oil and consequently renders smoke point a poor indicator of the capacity of a fat or oil to withstand heat, in a non-cuisine related sense. Virgin (raw) oils, which contain various flavorful organic compounds, have lower smoke points than refined oils because the organic compounds burn. Animal-based fats and oils tend to have lower smoke points than vegetable-based ones, as well. Oils made of polyunsaturated fats have lower smoke points, those made of monounsaturated fats have middling smoke points, and oils made of saturated fats have even higher smoke points. The level of refinement, seed variety, and climate and weather of growth of the source plants also significantly affect its smoke point.

↑ Return to Menu

Fire point in the context of Cleveland open-cup method

The Cleveland open-cup method is one of three main methods in chemistry for determining the flash point of a petroleum product using a Cleveland open-cup apparatus, also known as a Cleveland open-cup tester. First, the test cup of the apparatus (usually brass) is filled to a certain level with a portion of the product. Then, the temperature of this chemical is increased rapidly and then at a slow, constant rate as it approaches the theoretical flash point. The increase in temperature will cause the chemical to begin to produce flammable vapor in increasing quantities and density. The lowest temperature at which a small test flame passing over the surface of the liquid causes the vapor to ignite is considered the chemical's flash point. This apparatus may also be used to determine the chemical's fire point which is considered to have been reached when the application of the test flame produces at least five continuous seconds of ignition. Temperature range of this apparatus is 120 to 250 °C (248 to 482 °F).

The other principal methods of establishing chemical flash points are the Pensky–Martens closed-cup test and the Tagliabue cup method (often called simply the "Tag method").

↑ Return to Menu