Dowel in the context of "Cabinet making"

A shelf (pl.: shelves) is a flat, horizontal or sloping plane used for items that are displayed or stored in a home, business, store, or elsewhere. It is raised off the floor and often anchored to a wall, supported on its shorter length sides by brackets, or otherwise anchored to cabinetry by brackets, dowels, screws, or nails. It can also be held up by columns or pillars. A shelf is also known as a counter, ledge, mantel, or rack. Tables designed to be placed against a wall, possibly mounted, are known as console tables, and are similar to individual shelves.

The Idalion bilingual is a bilingual Cypriot–Phoenician inscription found in 1869 in Dali, Cyprus. It was the key to the decipherment of the Cypriot syllabary, in the manner of the Rosetta Stone to hieroglyphs. The discovery of the inscription was first announced by Paul Schröder in May 1872. It is dated to 388 BCE. The Phoenician inscription is known as KAI 38 and CIS I 89.

It was discovered by Robert Hamilton Lang in his excavations at the Temple of Idaliom, whose work there had been inspired by the discovery of the Idalion Tablet in 1850. The stone was found in the centre of the temple, together with the five other Idalion Temple inscriptions. The stone is thought to have been a pedestal for a statue, as there is an apparent dowel hole in the top.

A fastener (US English) or fastening (UK English) is a hardware device that mechanically joins or affixes two or more objects together. In general, fasteners are used to create non-permanent joints; that is, joints that can be removed or dismantled without damaging the joining components. Steel fasteners are usually made of stainless steel, carbon steel, or alloy steel.

Other methods of joining materials, some of which may create permanent joints, include: crimping, welding, soldering, brazing, taping, gluing, cement, or the use of other adhesives. Force may also be used, such as with magnets, vacuum (like suction cups), or even friction (like sticky pads). Some types of woodworking joints make use of separate internal reinforcements, such as dowels or biscuits, which in a sense can be considered fasteners within the scope of the joint system, although on their own they are not general-purpose fasteners.

A peg wood (also pegwood) is a cleaning tool used in watchmaking to clean pivot and other small holes. Pegwood is made from a specially selected orangewood that has been dried and sheds very little. A peg wood consists of a thin piece or dowel of wood that the user shapes to be pointed. The standard length is 150 mm and the thickness varies from 2 to 6 mm.

They are also used to clean watch case backs and watch case rims, to dry hands and to clean between bracelet rings which might gather grease and dust when worn over a long period. The point is twirled around the hole to be cleaned to remove dirt. A new point is cut and the operation is repeated until the peg wood is clean when removed from the hole.

A treenail, also trenail, trennel, or trunnel, is a wooden peg, pin, or dowel used to fasten pieces of wood together, especially in timber frames, covered bridges, wooden ship- and boat-building. It is driven into a hole bored through two (or more) pieces of structural wood (mortise and tenon).

In manufacturing or mechanical engineering a groove is a long and narrow indentation built into a material, generally for the purpose of allowing another material or part to move within the groove and be guided by it. Examples include:

1. A canal cut in a hard material, usually metal. This canal can be round, oval or an arc in order to receive another component such as a boss, a tongue or a gasket. It can also be on the circumference of a dowel, a bolt, an axle or on the outside or inside of a tube or pipe etc. This canal may receive a circlip, an o-ring, or a gasket.
2. A depression on the entire circumference of a cast or machined wheel, a pulley or sheave. This depression may receive a cable, a rope or a belt.
3. A longitudinal channel formed in a hot rolled rail profile such as a grooved rail. This groove is for the flange on a train wheel.

Grooves were used by ancient Roman engineers to survey land.

The Lion Capital of Ashoka is the capital, or head, of a column erected by the Mauryan emperor Ashoka in Sarnath, India, c. 250 BCE. Its crowning features are four life-sized lions set back to back on a drum-shaped abacus. The side of the abacus is adorned with wheels in relief, and interspersing them, four animals, a lion, an elephant, a bull, and a galloping horse follow each other from right to left. A bell-shaped lotus forms the lowest member of the capital, and the whole 2.1 metres (7 ft) tall, carved out of a single block of sandstone and highly polished, was secured to its monolithic column by a metal dowel. Erected after Ashoka's conversion to Buddhism, it commemorated the site of Gautama Buddha's first sermon some two centuries before.

The capital eventually fell to the ground and was buried. It was excavated by the Archeological Survey of India (ASI) in the very early years of the 20th century. The excavation was undertaken by F. O. Oertel in the ASI winter season of 1904–1905. The column, which had broken before it became buried, remains in its original location in Sarnath, protected but on view for visitors. The Lion Capital was in much better condition, though not undamaged. It was cracked across the neck just above the lotus, and two of its lions had sustained damage to their heads. It is displayed not far from the excavation site in the Sarnath Museum, the oldest site museum of the ASI.