Digital Signal 3 in the context of "T-carrier"

Play Trivia Questions online!

or

Skip to study material about Digital Signal 3 in the context of "T-carrier"

Ad spacer

>>>PUT SHARE BUTTONS HERE<<<

👉 Digital Signal 3 in the context of T-carrier

The T-carrier system is a member of the series of data-multiplexing carrier systems developed by AT&T Bell Laboratories for digital transmission of multiplexed telephone calls.

The first version, the Transmission System 1 (T1), was introduced in 1962 in the Bell System, and could transmit up to 24 telephone calls simultaneously over a single transmission line of twisted pair copper wire. Subsequent specifications carried multiples of the basic T1 (1.544 Mbit/s) data rates, such as T2 (6.312 Mbit/s) with 96 channels, T3 (44.736 Mbit/s) with 672 channels, and others.

↓ Explore More Topics
In this Dossier

Digital Signal 3 in the context of SONET

Synchronous Optical Networking (SONET) and Synchronous Digital Hierarchy (SDH) are standardized protocols that transfer multiple digital bit streams synchronously over optical fiber using lasers or highly coherent light from light-emitting diodes (LEDs). At low transmission rates, data can also be transferred via an electrical interface. The method was developed to replace the plesiochronous digital hierarchy (PDH) system for transporting large amounts of telephone calls and data traffic over the same fiber without the problems of synchronization.

SONET and SDH, which are essentially the same, were originally designed to transport circuit mode communications, e.g. DS1, DS3, from a variety of different sources. However, they were primarily designed to support real-time, uncompressed, circuit-switched voice encoded in PCM format. The primary difficulty in doing this prior to SONET/SDH was that the synchronization sources of these various circuits were different. This meant that each circuit was actually operating at a slightly different rate and with different phase. SONET/SDH allowed for the simultaneous transport of many different circuits of differing origin within a single framing protocol. SONET/SDH is not a complete communications protocol in itself, but a transport protocol (not a "transport" in the OSI Model sense).

↑ Return to Menu