Cantilever in the context of "Tube (structure)"

Soft-bodied organisms are organisms that lack rigid physical skeletons or frame, roughly corresponds to the group Vermes as proposed by Carl von Linné. The term typically refers to non-panarthropod invertebrates from the kingdom Animalia, although many non-vascular plants (mosses and algae), fungi (such as jelly fungus), lichens and slime molds can also be seen as soft-bodied organisms by definition.

All animals have a muscular system of some sort but, since myocytes are tensile actuator units that can only contract and pull but never push, some animals evolved rigid body parts upon which the muscles can attach and act as levers/cantilevers to redirect force and produce locomotive propulsion. These rigid parts also serve as structural elements to resist gravity and ambient pressure, as well as sometimes provide protective surfaces shielding internal structures from trauma and exposure to external thermal, chemical and pathogenic insults. Such physical structures are the commonly referred "skeletons", which may be internal (as in vertebrates, echinoderms and sponges) or external (as in arthropods and non-coleoid molluscs). However, many soft-bodied animals do still have a functional skeleton maintained by body fluid hydrostatics known as a hydroskeleton, such as that of earthworms, jellyfish, tapeworms, squids and an enormous variety of invertebrates from almost every phyla of the animal kingdom; and many have hardened teeth that allow them to chew, bite and burrow despite the rest of body being soft.

Rowing is the act of propelling a human-powered watercraft using the sweeping motions of oars to displace water and generate reactional propulsion. Rowing is functionally similar to paddling, but rowing requires oars to be mechanically attached to the boat, and the rower drives the oar like a lever, exerting force in the same direction as the boat's travel; while paddles are completely hand-held and have no attachment to the boat, and are driven like a cantilever, exerting force opposite to the intended direction of the boat.

In some strict terminologies, using oars for propulsion may be termed either "pulling" or "rowing", with different definitions for each. Where these strict terminologies are used, the definitions are reversed depending on the context. On saltwater a "pulling boat" has each person working one oar on one side, alternating port and starboard along the length of the boat; whilst "rowing" means each person operates two oars, one on each side of the boat. On inland waterways, the opposite applies, with "rowing" being where each person in a crew works one oar and "sculling" (especially in sport rowing) involves each participant using a pair of oars. In a maritime setting "sculling" means propelling a boat with a single oar operated over the stern.

A cantilever bridge is a bridge built using structures that project horizontally into space, supported on only one end (called cantilevers). For small footbridges, the cantilevers may be simple beams; however, large cantilever bridges designed to handle road or rail traffic use trusses built from structural steel, or box girders built from prestressed concrete.

The steel truss cantilever bridge was a major engineering breakthrough when first put into practice, as it can span distances of over 1,500 feet (450 m), and can be more easily constructed at difficult crossings by virtue of using little or no falsework.

Marina Bay Sands is an integrated resort fronting Marina Bay in Singapore and a landmark of the city. At its opening in 2010, it was deemed the world's most expensive standalone casino property at S$8 billion (US$6.88 billion). The resort includes a 1,850-room hotel, a 120,000-square-metre (1,300,000 sq ft) meetings and conventions facility at Sands Expo & Convention Centre, a 74,000-square-metre (800,000 sq ft) luxury shopping mall, The Shoppes at Marina Bay Sands, an ArtScience museum, a 2,183-capacity theatre, the world's first floating Apple store, the world's first Louis Vuitton Island Maison, celebrity chef and signature restaurants, and a casino with 500 tables and 3,000 electronic gaming machines. The complex includes three towers topped by the Sands Skypark, a 340-metre-long (1,120 ft) skyway connecting the towers with a capacity of 3,902 people and a 150 m (490 ft) infinity swimming pool, set on top of the world's largest public cantilevered platform, which overhangs the north tower by 66.5 m (218 ft). The 20-hectare resort was designed by Moshe Safdie.

The resort is owned by Las Vegas Sands in agreement with the Singaporean authorities. Marina Bay Sands was originally set to open in 2009, but its construction faced delays caused by escalating costs of material and labour shortages from the outset exacerbated by the 2008 financial crisis. This pressured Las Vegas Sands to delay its projects elsewhere to complete the integrated resort. Its owner decided to open the integrated resort in stages, and it was approved by the Singapore authorities. The resort and SkyPark were officially opened on 23 and 24 June 2010 as part of a two-day celebration, following the casino's opening on 27 April that year. The SkyPark opened the following day. The theatre was completed in time for the first performance of Riverdance on 30 November. The indoor skating rink, which uses artificial ice, opened to a performance by Michelle Kwan on 18 December. The ArtScience Museum opened to the public and the debut of a 13-minute light, laser and water show called Wonder Full on 19 February 2011, marked the full completion of the integrated resort.

A biplane is a fixed-wing aircraft with two main wings stacked one above the other. The first powered, controlled aeroplane to fly, the Wright Flyer, used a biplane wing arrangement, as did many aircraft in the early years of aviation. While a biplane wing structure has a structural advantage over a monoplane, it produces more drag than a monoplane wing. Improved structural techniques, better materials and higher speeds made the biplane configuration obsolete for most purposes by the late 1930s.

Biplanes offer several advantages over conventional cantilever monoplane designs: they permit lighter wing structures, low wing loading and smaller span for a given wing area. However, interference between the airflow over each wing increases drag substantially, and biplanes generally need extensive bracing, which causes additional drag.

Contemporary architecture is the architecture of the 21st century. No single style is dominant. Contemporary architects work in several different styles, from postmodernism, high-tech architecture and new references and interpretations of traditional architecture like New Classical architecture to highly conceptual forms and designs, resembling sculpture on an enormous scale. Some of these styles and approaches make use of very advanced technology and modern building materials, such as tube structures which allow construction of buildings that are taller, lighter and stronger than those in the 20th century, while others prioritize the use of natural and ecological materials like stone, wood and lime. One technology that is common to all forms of contemporary architecture is the use of new techniques of computer-aided design, which allow buildings to be designed and modeled on computers in three dimensions, and constructed with more precision and speed.

Contemporary buildings and styles vary greatly. Some feature concrete structures wrapped in glass or aluminium screens, very asymmetric facades, and cantilevered sections which hang over the street. Skyscrapers twist, or break into crystal-like facets. Facades are designed to shimmer or change color at different times of day.

A bay window is a window space projecting outward from the main walls of a building and forming a bay in a room. A bow window is a form of bay with a curve rather than angular facets; an oriel window is a bay window that does not touch the ground.

A window may be all three: projecting outward from the main fascia of a wall, curved in shape, and not reaching the ground. A bay window may be supported from the ground by a foundation, or in space by corbels, brackets, or cantilever.

An oriel window is a form of bay window which protrudes from the main wall of a building but does not reach to the ground. Supported by corbels, brackets, or similar cantilevers, an oriel window generally projects from an upper floor, but is also sometimes used on the ground floor.

The Frederick C. Robie House is a historic house museum on the University of Chicago campus in the Hyde Park neighborhood of Chicago, Illinois, United States. Designed by the architect Frank Lloyd Wright in the Prairie style, it was completed in 1910 for the manufacturing executive Frederick Carlton Robie and his family. George Mann Niedecken oversaw the interior design, while associate architects Hermann von Holst and Marion Mahony also assisted with the design. The Robie House has been described as one of Wright's best Prairie style buildings and was one of the last structures he designed at his studio in Oak Park, Illinois.

The house is a three-story, four-bedroom residence with an attached three-car garage. The house's open floor plan consists of two large, offset rectangles or "vessels". The facade and perimeter walls are made largely of Roman brick, with concrete trim, cut-stone decorations, and art glass windows. The massing includes several terraces, which are placed on different levels, in addition to roofs that are cantilevered outward. The house spans around 9,065 square feet (842.2 m), split between communal spaces in the southern vessel and service rooms in the northern vessel. The first floor has a billiard room, playroom, and several utility rooms. The living room, dining room, kitchen, guest bedroom, and servants' quarters are on the second story, while three additional bedrooms occupy the third floor.