Aft in the context of Prow


Aft in the context of Prow

Aft Study page number 1 of 1

Play TriviaQuestions Online!

or

Skip to study material about Aft in the context of "Prow"


⭐ Core Definition: Aft

This list of ship directions provides succinct definitions for terms applying to spatial orientation in a marine environment or location on a vessel, such as fore, aft, astern, aboard, or topside.

↓ Menu
HINT:

šŸ‘‰ Aft in the context of Prow

The bow (/baʊ/) is the forward part of the hull of a ship or boat, the point that is farthest forward when the vessel is underway in the usual direction. The aft end of the boat is the stern.

Prow may be used as a synonym for bow, or it may refer specifically to the foremost part of the bow above the waterline.

↓ Explore More Topics
In this Dossier

Aft in the context of Unity (ISS module)

Unity, also known as Node 1, is the first U.S.-built component of the International Space Station (ISS). This cylindrical module, constructed of steel by Boeing for NASA, serves as the critical link between the orbiting laboratory's Russian Orbital Segment and US Orbital Segment.

Unity was launched on December 4, 1998, aboard the Space Shuttle Endeavour on STS-88. Two days later it was berthed to the previously launched Zarya module, marking the first connection between ISS components. Its six Common Berthing Mechanism (CBM) locations (forward, aft, port, starboard, zenith, and nadir) facilitate connections to other modules. At launch, two CBM locations were fitted with Pressurized Mating Adapters (PMA), one of which enabled the mating with Zarya.

View the full Wikipedia page for Unity (ISS module)
↑ Return to Menu

Aft in the context of Stern

The stern is the back or aft-most part of a ship or boat, technically defined as the area built up over the sternpost, extending upwards from the counter rail to the taffrail. The stern lies opposite the bow, the foremost part of a ship. Originally, the term only referred to the aft port section of the ship, but eventually came to refer to the entire back of a vessel. The stern end of a ship is indicated with a white navigation light at night.

Sterns on European and American wooden sailing ships began with two principal forms: the square or transom stern and the elliptical, fantail, or merchant stern, and were developed in that order. The hull sections of a sailing ship located before the stern were composed of a series of U-shaped rib-like frames set in a sloped or "cant" arrangement, with the last frame before the stern being called the fashion timber(s) or fashion piece(s), so called for "fashioning" the after part of the ship. This frame is designed to support the various beams that make up the stern.

View the full Wikipedia page for Stern
↑ Return to Menu

Aft in the context of Braces (sailing)

A brace on a square-rigged ship is a rope (line) used to rotate a yard around the mast, to allow the ship to sail at different angles to the wind. Braces are always used in pairs, one at each end of a yard (yardarm), termed port brace and starboard brace of a given yard or sail (e.g., the starboard main-brace is the brace fixed to the right end of the yard of the main sail).

The braces are fixed to the outer ends of the yards, and are led to the deck as far aft as possible, to allow the crew to haul on them. The lower yards' braces can usually run directly to the deck, but to do so with those higher up would mean that most of the force was pulling downwards rather than backwards. Instead, the braces for the upper yards run to another mast and thence to the deck. On the aftermost mast, this may mean they have to be led forwards instead of backwards. Braces from the aftermost mast that run to the very stern of the ship often pass through blocks attached to short outriggers projecting from the side of the ship in order to improve their lead. These projections are called bumkins and can be seen in the picture.

View the full Wikipedia page for Braces (sailing)
↑ Return to Menu

Aft in the context of F-22 Raptor

The Lockheed Martin/Boeing F-22 Raptor is an American twin-engine, jet-powered, all-weather, supersonic stealth fighter aircraft. As a product of the United States Air Force's Advanced Tactical Fighter (ATF) program, the aircraft was designed as an air superiority fighter, but also incorporates ground attack, electronic warfare, and signals intelligence capabilities. The prime contractor, Lockheed Martin, built most of the F-22 airframe and weapons systems and conducted final assembly, while program partner Boeing provided the wings, aft fuselage, avionics integration, and training systems.

First flown in 1997, the F-22 descended from the Lockheed YF-22 and was variously designated F-22 and F/A-22 before it formally entered service in December 2005 as the F-22A. It replaced the F-15 Eagle in most active duty U.S. Air Force (USAF) squadrons. Although the service had originally planned to buy a total of 750 ATFs to replace its entire F-15 fleet, it later scaled down to 381 and the program was ultimately cut to 195 aircraft – 187 of them operational models – in 2009 due to political opposition from high costs, a perceived lack of air-to-air threats at the time of production, and the development of the more affordable and versatile F-35 Lightning II. The last aircraft was delivered in 2012.

View the full Wikipedia page for F-22 Raptor
↑ Return to Menu

Aft in the context of Sternpost

A sternpost is the upright structural member or post at the aft end of a ship or a boat, to which are attached the transoms and the rearmost part of the stern.

The sternpost may either be completely vertical or may be tilted or "raked" slightly aft. It rests on or "fays to" the ship's keel.

View the full Wikipedia page for Sternpost
↑ Return to Menu

Aft in the context of Poop deck

In naval architecture, a poop deck is a deck that forms the roof of a cabin built in the rear, or "aft", part of the superstructure of a ship.

The name originates from the French word for stern, poupe, from Latin puppis. Thus the poop deck is technically a stern deck, which in sailing ships was usually elevated as the roof of the stern or "after" cabin, also known as the "poop cabin" (or simply the poop). On sailing ships, the helmsman would steer the craft from the quarterdeck, immediately in front of the poop deck. At the stern, the poop deck provides an elevated position ideal for observation. While the main purpose of the poop is adding buoyancy to the aft, on a sailing ship the cabin was also used as an accommodation for the shipmaster and officers. On modern, motorized warships, the ship functions which were once carried out on the poop deck have been moved to the bridge, usually located in a superstructure.

View the full Wikipedia page for Poop deck
↑ Return to Menu