Marginal cost in the context of "Comparative advantage"

⭐ In the context of comparative advantage, a nation will most effectively specialize in producing goods where it demonstrates…

Ad spacer

⭐ Core Definition: Marginal cost

In economics, marginal cost (MC) is the change in the total cost that arises when the quantity produced is increased, i.e. the cost of producing additional quantity. In some contexts, it refers to an increment of one unit of output, and in others it refers to the rate of change of total cost as output is increased by an infinitesimal amount. As Figure 1 shows, the marginal cost is measured in dollars per unit, whereas total cost is in dollars, and the marginal cost is the slope of the total cost, the rate at which it increases with output. Marginal cost is different from average cost, which is the total cost divided by the number of units produced.

At each level of production and time period being considered, marginal cost includes all costs that vary with the level of production, whereas costs that do not vary with production are fixed. For example, the marginal cost of producing an automobile will include the costs of labor and parts needed for the additional automobile but not the fixed cost of the factory building, which does not change with output. The marginal cost can be either short-run or long-run marginal cost, depending on what costs vary with output, since in the long run even building size is chosen to fit the desired output.

↓ Menu

>>>PUT SHARE BUTTONS HERE<<<

👉 Marginal cost in the context of Comparative advantage

Comparative advantage in an economic model is the advantage over others in producing a particular good. A good can be produced at a lower relative opportunity cost or autarky price, i.e. at a lower relative marginal cost prior to trade. Comparative advantage describes the economic reality of the gains from trade for individuals, firms, or nations, which arise from differences in their factor endowments or technological progress.

David Ricardo developed the classical theory of comparative advantage in 1817 to explain why countries engage in international trade even when one country's workers are more efficient at producing every single good than workers in other countries. He demonstrated that if two countries capable of producing two commodities engage in the free market (albeit with the assumption that the capital and labour do not move internationally), then each country will increase its overall consumption by exporting the good for which it has a comparative advantage while importing the other good, provided that there exist differences in labor productivity between both countries. Widely regarded as one of the most powerful yet counter-intuitive insights in economics, Ricardo's theory implies that comparative advantage rather than absolute advantage is responsible for much of international trade.

↓ Explore More Topics
In this Dossier

Marginal cost in the context of Monopoly

A monopoly (from Greek μόνος, mónos, 'single, alone' and πωλεῖν, pōleîn, 'to sell') is a market in which one person or company is the only supplier of a particular good or service. A monopoly is characterized by a lack of economic competition to produce a particular thing, a lack of viable substitute goods, and the possibility of a high monopoly price well above the seller's marginal cost that leads to a high monopoly profit. The verb monopolise or monopolize refers to the process by which a company gains the ability to raise prices or exclude competitors. In economics, a monopoly is a single seller. In law, a monopoly is a business entity that has significant market power, that is, the power to charge overly high prices, which is associated with unfair price raises. Although monopolies may be big businesses, size is not a characteristic of a monopoly. A small business may still have the power to raise prices in a small industry (or market).

A monopoly may also have monopsony control of a sector of a market. A monopsony is a market situation in which there is only one buyer. Likewise, a monopoly should be distinguished from a cartel (a form of oligopoly), in which several providers act together to coordinate services, prices or sale of goods. Monopolies, monopsonies and oligopolies are all situations in which one or a few entities have market power and therefore interact with their customers (monopoly or oligopoly), or suppliers (monopsony) in ways that distort the market.

↑ Return to Menu

Marginal cost in the context of Overconsumption

Overconsumption describes a situation where consumers overuse their available goods and services to where they cannot, or do not want to, replenish or reuse them. In microeconomics, this is the point where the marginal cost of a consumer is greater than their marginal utility. The term overconsumption is quite controversial and does not necessarily have a single unifying definition. When used to refer to natural resources to the point where the environment is negatively affected, it is synonymous with the term overexploitation. However, when used in the broader economic sense, overconsumption can refer to all types of goods and services, including artificial ones, e.g., "the overconsumption of alcohol can lead to alcohol poisoning." Overconsumption is driven by several factors of the current global economy, including forces like consumerism, planned obsolescence, economic materialism, and other unsustainable business models, and can be contrasted with sustainable consumption.

Defining the amount of a natural resource required to be consumed for it to count as "overconsumption" is challenging because defining a sustainable capacity of the system requires accounting for many variables. A system's total capacity occurs at regional and worldwide levels, which means that specific regions may have higher consumption levels of certain resources than others due to greater resources without overconsuming a resource. A long-term pattern of overconsumption in any region or ecological system can cause a reduction in natural resources, often resulting in environmental degradation. However, this is only when applying the word to environmental impacts. When used in an economic sense, this point is defined as when the marginal cost of a consumer is equal to their marginal utility. Gossen's law of diminishing utility states that at this point, the consumer realizes the cost of consuming/purchasing another item/good is not worth the amount of utility (also known as happiness or satisfaction from the good) they had received, and therefore is not conducive to the consumer's wellbeing.

↑ Return to Menu

Marginal cost in the context of Allocative efficiency

Allocative efficiency is a state of the economy in which production is aligned with the preferences of consumers and producers; in particular, the set of outputs is chosen so as to maximize the social welfare of society. This is achieved if every produced good or service has a marginal benefit equal to or greater than the marginal cost of production.

↑ Return to Menu

Marginal cost in the context of Monopoly price

In microeconomics, a monopoly price is set by a monopoly. A monopoly occurs when a firm lacks any viable competition and is the sole producer of the industry's product. Because a monopoly faces no competition, it has absolute market power and can set a price above the firm's marginal cost.

The monopoly ensures a monopoly price exists when it establishes the quantity of the product. As the sole supplier of the product within the market, its sales establish the entire industry's supply within the market, and the monopoly's production and sales decisions can establish a single price for the industry without any influence from competing firms. The monopoly always considers the demand for its product as it considers what price is appropriate, such that it chooses a production supply and price combination that ensures a maximum economic profit, which is determined by ensuring that the marginal cost (determined by the firm's technical limitations that form its cost structure) is the same as the marginal revenue (MR) (as determined by the impact a change in the price of the product will impact the quantity demanded) at the quantity it decides to sell. The marginal revenue is solely determined by the demand for the product within the industry and is the change in revenue that will occur by lowering the price just enough to ensure a single additional unit is sold. The marginal revenue is positive, but it is lower than its associated price because lowering the price will increase the demand for its product and increase the firm's sales revenue, and lower the price paid by those who are willing to buy the product at the higher price, which ensures a lower sales revenue on the product sales than those willing to pay the higher price.

↑ Return to Menu

Marginal cost in the context of Market power

In economics, market power refers to the ability of a firm to influence the price at which it sells a product or service by manipulating either the supply or demand of the product or service to increase economic profit. In other words, market power occurs if a firm does not face a perfectly elastic demand curve and can set its price (P) above marginal cost (MC) without losing revenue. This indicates that the magnitude of market power is associated with the gap between P and MC at a firm's profit maximising level of output. The size of the gap, which encapsulates the firm's level of market dominance, is determined by the residual demand curve's form. A steeper reverse demand indicates higher earnings and more dominance in the market. Such propensities contradict perfectly competitive markets, where market participants have no market power, P = MC and firms earn zero economic profit. Market participants in perfectly competitive markets are consequently referred to as 'price takers', whereas market participants that exhibit market power are referred to as 'price makers' or 'price setters'.

The market power of any individual firm is controlled by multiple factors, including but not limited to, their size, the structure of the market they are involved in, and the barriers to entry for the particular market. A firm with market power has the ability to individually affect either the total quantity or price in the market. This said, market power has been seen to exert more upward pressure on prices due to effects relating to Nash equilibria and profitable deviations that can be made by raising prices. Price makers face a downward-sloping demand curve and as a result, price increases lead to a lower quantity demanded. The decrease in supply creates an economic deadweight loss (DWL) and a decline in consumer surplus. This is viewed as socially undesirable and has implications for welfare and resource allocation as larger firms with high markups negatively effect labour markets by providing lower wages. Perfectly competitive markets do not exhibit such issues as firms set prices that reflect costs, which is to the benefit of the customer. As a result, many countries have antitrust or other legislation intended to limit the ability of firms to accrue market power. Such legislation often regulates mergers and sometimes introduces a judicial power to compel divestiture.

↑ Return to Menu