Sabot (firearms) in the context of "Kinetic energy penetrator"

Play Trivia Questions online!

or

Skip to study material about Sabot (firearms) in the context of "Kinetic energy penetrator"




⭐ Core Definition: Sabot (firearms)

A sabot (UK: /sæˈb, ˈsæb/, US: /ˈsb/) is a supportive device used in firearm/artillery ammunitions to fit/patch around a projectile, such as a bullet/slug or a flechette-like projectile (such as a kinetic energy penetrator), and keep it aligned in the center of the barrel when fired. It allows a narrower projectile with high sectional density to be fired through a barrel of much larger bore diameter with maximal accelerative transfer of kinetic energy. After leaving the muzzle, the sabot typically separates from the projectile in flight, diverting only a very small portion of the overall kinetic energy.

The sabot component in projectile design is the relatively thin, tough and deformable seal known as a driving band or obturation ring needed to trap propellant gases behind a projectile, and also keep the projectile centered in the barrel, when the outer shell of the projectile is only slightly smaller in diameter than the caliber of the barrel. Driving bands and obturators are used to seal these full-bore projectiles in the barrel because of manufacturing tolerances; there always exists some gap between the projectile outer diameter and the barrel inner diameter, usually a few thousandths of an inch; enough of a gap for high pressure gasses to slip by during firing. Driving bands and obturator rings are made from material that will deform and seal the barrel as the projectile is forced from the chamber into the barrel.

↓ Menu

In this Dossier

Sabot (firearms) in the context of Shotgun

A shotgun (also known as a scattergun, peppergun, or historically as a fowling piece) is a long-barreled firearm designed to shoot a straight-walled cartridge known as a shotshell, which discharges numerous small spherical projectiles called shot, or a single solid projectile called a slug. Shotguns are most commonly used as smoothbore firearms, meaning that their gun barrels have no rifling on the inner wall, but rifled barrels for shooting sabot slugs (slug barrels) are also available.

Shotguns come in a wide variety of calibers and gauges ranging from 5.5 mm (.22 inch) to up to 5 cm (2.0 in), though the 12-gauge (18.53 mm or 0.729 in) and 20-gauge (15.63 mm or 0.615 in) bores are by far the most common. Almost all are breechloading, and can be single barreled, double barreled, or in the form of a combination gun. Like rifles, shotguns also come in a range of different action types, both single-shot and repeating. For non-repeating designs, over-and-under and side-by-side break action shotguns are by far the most common variants. Although revolving shotguns do exist, most modern repeating shotguns are either pump action or semi-automatic, and also fully automatic, lever-action, or bolt-action to a lesser extent.

↑ Return to Menu

Sabot (firearms) in the context of .50 BMG

The .50 BMG (.50 Browning Machine Gun), also known as 12.7×99mm NATO, and designated as the 50 Browning by the C.I.P., is a .50 in (12.7 mm) caliber cartridge developed for the M2 Browning heavy machine gun in the late 1910s, entering official service in 1921. Under STANAG 4383, it is a standard service cartridge for NATO forces. The cartridge itself has been made in many variants: multiple generations of regular ball, tracer, armor-piercing (AP), incendiary, and saboted sub-caliber penetrator rounds. The rounds intended for machine guns are made into a continuous ammunition belt using metallic links.

The .50 BMG cartridge is also used in anti-materiel rifles. A wide variety of ammunition is available, and the availability of match grade ammunition has increased the usefulness of .50 caliber rifles by allowing more accurate fire than lower-quality rounds.

↑ Return to Menu

Sabot (firearms) in the context of Shotgun slug

A shotgun slug is a heavy projectile (a slug) made of lead, copper, or other material and fired from a shotgun. Slugs are designed for hunting large game, and other uses, particularly in areas near human population where their short range and slow speed helps increase safety margin. The first effective modern shotgun slug was introduced by Wilhelm Brenneke in 1898, and his design remains in use today. Most shotgun slugs are designed to be fired through a cylinder bore, improved cylinder choke, rifled choke tubes, or fully rifled bores. Slugs differ from round ball lead projectiles in that they are stabilized in some manner.

In the early development of firearms for the year 1875, smooth-bored barrels were not differentiated to fire either single or multiple projectiles. Single projectiles were used for larger game and warfare, though shot could be loaded as needed for small game, birds, and activities such as trench clearing and hunting. As firearms became specialized and differentiated, shotguns were still able to fire round balls, though rifled muskets were far more accurate and effective. Modern slugs emerged as a way of improving on the accuracy of round balls. Early slugs were heavier in front than in the rear, similar to a Minié ball, to provide aerodynamic stabilization. Rifled barrels, rifled slugs and rifled choke tubes were developed later to provide gyroscopic spin stabilization in place of or in addition to aerodynamic stabilization. Some of these slugs are saboted sub-caliber projectiles, resulting in greatly improved external ballistics performance.

↑ Return to Menu

Sabot (firearms) in the context of Wadding

Wadding is a disc of material used in guns to seal gas behind a projectile (a bullet or ball), or to separate the propellant from loosely packed shots.Wadding can be crucial to a gun's efficiency, since any gas that leaks past a projectile as it is being fired is wasted. A harder or more carefully designed item which serves this purpose is often called a sabot. Wadding for muzzleloaders is typically a small piece of cloth, or paper wrapping from the cartridge.

↑ Return to Menu