Rotary dial in the context of Phone number

A telephone number is the address of a telecommunication endpoint, such as a telephone, in a telephone network, such as the public switched telephone network (PSTN). A telephone number typically consists of a sequence of digits, but historically letters were also used in connection with telephone exchange names.

Telephone numbers facilitate the switching and routing of calls using a system of destination code routing. Telephone numbers are entered or dialed by a calling party on the originating telephone set, which transmits the sequence of digits in the process of signaling to a telephone exchange. The exchange completes the call either to another locally connected subscriber or via the PSTN to the called party. Telephone numbers are assigned within the framework of a national or regional telephone numbering plan to subscribers by telephone service operators, which may be commercial entities, state-controlled administrations, or other telecommunication industry associations.

A telephone, commonly shortened to phone, is a telecommunications device that enables two or more users to conduct a conversation when they are too far apart to be easily heard directly. A telephone converts sound, typically and most efficiently the human voice, into electronic signals that are transmitted via cables and other communication channels to another telephone which reproduces the sound to the receiving user. The term is derived from Ancient Greek: τῆλε, romanized: tēle, lit. 'far' and φωνή (phōnē, voice), together meaning distant voice.

In 1876, Alexander Graham Bell was the first to be granted a United States patent for a device that produced clearly intelligible replication of the human voice at a second device. This instrument was further developed by many others, and became rapidly indispensable in business, government, and in households.

In the early days of telephony, companies used manual telephone switchboards, and switchboard operators connected calls by inserting a pair of phone plugs into the appropriate jacks. They were gradually phased out and replaced by automated systems, first those allowing direct dialing within a local area, then for long-distance and international direct dialing.

A push-button telephone is a telephone that has buttons or keys for dialing a telephone number, in contrast to a rotary dial used in earlier telephones.

Western Electric experimented as early as 1941 with methods of using mechanically activated reeds to produce two tones for each of the ten digits and by the late 1940s such technology was field-tested in a No. 5 Crossbar switching system in Pennsylvania. The technology at that time proved unreliable and it was not until after the invention of the transistor that push-button technology became practical.

Pulse dialing is a signaling technology in telecommunications in which a direct current local loop circuit is interrupted according to a defined coding system for each signal transmitted, usually a digit. This lends the method the often used name loop disconnect dialing. In the most common variant of pulse dialing, decadic dialing, each of the ten Arabic numerals are encoded in a sequence of up to ten pulses. The most common version decodes the digits 1 through 9, as one to nine pulses, respectively, and the digit 0 as ten pulses. Historically, the most common device to produce such pulse trains is the rotary dial of the telephone, lending the technology another name, rotary dialing.

The pulse repetition rate was historically determined based on the response time needed for electromechanical switching systems to operate reliably. Most telephone systems used the nominal rate of ten pulses per second, but operator dialing within and between central offices often used pulse rates up to twenty per second.

Clix is a miniatures wargaming system developed by WizKids. It is characterized by the use of a dial wheel in the base of miniature figurines. The dial can be turned to reveal hidden information, representing the changing statistics of the figurine as the game progresses.

E.161 is an ITU-T Recommendation that defines the arrangement of digits, letters, and symbols on telephone keypads and rotary dials. It also defines the recommended mapping between the basic Latin alphabet and digits (e.g., "DEF" on 3). Uses for this mapping include:

• Multi-tap and predictive text systems.
• Forming phonewords from telephone numbers.
• Using alphabetic characters (e.g. as a mnemonic) in a personal identification number.

Keypads are specified both in the common 4 × 3 and several variations, such as 6 × 2 and 2 × 5. E.161 also specifies the dimensions and characteristics of the star and square, referred to in the standard as the 'star' and 'square' keys, respectively. (In practice, the 'square' key is almost invariably replaced by the number sign. and the sextile symbol is the more common choice for the star key.)

Dual-tone multi-frequency (DTMF) signaling is a telecommunication signaling system using the voice-frequency band over telephone lines between telephone equipment and other communications devices and switching centers. DTMF was first developed in the Bell System in the United States,and became known under the trademark Touch-Tone for use in push-button telephones, starting in 1963. The DTMF frequencies are standardized in ITU-T Recommendation Q.23. The signaling system is also known as MF4 in the United Kingdom, as MFV in Germany, and Digitone in Canada.

Touch-tone dialing with a telephone keypad gradually replaced the use of rotary dials and has become the industry standard in telephony to control equipment and signal user intent. The signaling on trunks in the telephone network uses a different type of multi-frequency signaling.