Putty in the context of "Dough"

Compression molding is a method of molding in which the molding material, generally preheated, is first placed in an open, heated mold cavity. The mold is closed with a top force or plug member, pressure is applied to force the material into contact with all mold areas, while heat and pressure are maintained until the molding material has cured; this process is known as compression molding method and in case of rubber it is also known as 'Vulcanisation'. The process employs thermosetting resins in a partially cured stage, either in the form of granules, putty-like masses, or preforms.

Compression molding is a high-volume, high-pressure method suitable for molding complex, high-strength fiberglass reinforcements. Advanced composite thermoplastics can also be compression molded with unidirectional tapes, woven fabrics, randomly oriented fiber mat or chopped strand. The advantage of compression molding is its ability to mold large, fairly intricate parts. Also, it is one of the lowest cost molding methods compared with other methods such as transfer molding and injection molding; moreover it wastes relatively little material, giving it an advantage when working with expensive compounds.

Chalk is a soft, white, porous, sedimentary carbonate rock. It is a form of limestone composed of the mineral calcite and originally formed under the sea by the accumulation and lithification of hard parts of organisms, mostly microscopic plankton, which had settled to the sea floor. Chalk is common throughout Western Europe, where deposits underlie parts of France, and steep cliffs are often seen where they meet the sea in places such as the Dover cliffs on the Kent coast of the English Channel.

Chalk is mined for use in industry, such as for quicklime, bricks and builder's putty, and in agriculture, for raising pH in soils with high acidity. It is also used for "blackboard chalk" for writing and drawing on various types of surfaces, although these can also be manufactured from other carbonate-based minerals, or gypsum.

Linseed oil, also known as flaxseed oil or flax oil (in its edible form), is a colorless to yellowish oil obtained from the dried, ripened seeds of the flax plant (Linum usitatissimum). The oil is obtained by pressing, sometimes followed by solvent extraction.

Owing to its polymer-forming properties, linseed oil is often blended with combinations of other oils, resins, or solvents as an impregnator, drying oil finish, or varnish in wood finishing; as a pigment binder in oil paints; as a plasticizer and hardener in putty; and in the manufacture of linoleum. Linseed oil use has declined since the 1950s with increased availability of synthetic alkyd resins, which function similarly, are petroleum-based, and resist yellowing.

Plasticine is a putty-like modelling material made from calcium salts, petroleum jelly and aliphatic acids. Though originally a brand name for the British product, it was later used generically in English as a product category for other formulations.

Plasticine is used for children's play and as a modelling medium for more formal or permanent structures. Because of its non-drying property, it is commonly chosen for stop motion animation, including several Academy Award-winning films by Nick Park.

A blood blister is a type of blister that forms when subdermal tissues and blood vessels are damaged without piercing the skin. It consists of a pool of lymph, blood and other body fluids trapped beneath the skin. If punctured, it suppurates a dark fluid. Sometimes the fluids are cut off from the rest of the body and dry up, leaving behind dead cell material inside the blister with a texture like putty. Some blood blisters can be extremely painful due to bruising where the blister occurred.

There are also blood blister-like aneurysms. These are sometimes located in the supraclinoid internal carotid artery, and have been recognized as having unique pathological and clinical features.