Port and starboard in the context of Glossary of nautical terms (M-Z)


Port and starboard in the context of Glossary of nautical terms (M-Z)

⭐ Core Definition: Port and starboard

Port and starboard are nautical terms for watercraft and spacecraft, referring respectively to the left and right sides of the vessel, when aboard and facing the bow (front).

Vessels with bilateral symmetry have left and right halves which are mirror images of each other. One asymmetric feature is where access to a boat, ship, or aircraft is at the side; it is usually only on the port side (hence the name).

↓ Menu
HINT:

In this Dossier

Port and starboard in the context of Unity (ISS module)

Unity, also known as Node 1, is the first U.S.-built component of the International Space Station (ISS). This cylindrical module, constructed of steel by Boeing for NASA, serves as the critical link between the orbiting laboratory's Russian Orbital Segment and US Orbital Segment.

Unity was launched on December 4, 1998, aboard the Space Shuttle Endeavour on STS-88. Two days later it was berthed to the previously launched Zarya module, marking the first connection between ISS components. Its six Common Berthing Mechanism (CBM) locations (forward, aft, port, starboard, zenith, and nadir) facilitate connections to other modules. At launch, two CBM locations were fitted with Pressurized Mating Adapters (PMA), one of which enabled the mating with Zarya.

View the full Wikipedia page for Unity (ISS module)
↑ Return to Menu

Port and starboard in the context of Braces (sailing)

A brace on a square-rigged ship is a rope (line) used to rotate a yard around the mast, to allow the ship to sail at different angles to the wind. Braces are always used in pairs, one at each end of a yard (yardarm), termed port brace and starboard brace of a given yard or sail (e.g., the starboard main-brace is the brace fixed to the right end of the yard of the main sail).

The braces are fixed to the outer ends of the yards, and are led to the deck as far aft as possible, to allow the crew to haul on them. The lower yards' braces can usually run directly to the deck, but to do so with those higher up would mean that most of the force was pulling downwards rather than backwards. Instead, the braces for the upper yards run to another mast and thence to the deck. On the aftermost mast, this may mean they have to be led forwards instead of backwards. Braces from the aftermost mast that run to the very stern of the ship often pass through blocks attached to short outriggers projecting from the side of the ship in order to improve their lead. These projections are called bumkins and can be seen in the picture.

View the full Wikipedia page for Braces (sailing)
↑ Return to Menu

Port and starboard in the context of Tack (sailing)

A tack is the windward side of a sailing craft (side from which the wind is coming while under way)—the starboard or port tack. Generally, a craft is on a starboard tack if the wind is coming over the starboard (right) side with sails on port (left) side. Similarly, a craft is on a port tack if the wind is coming over the port (left).

Tack is also a nautical term both for the lower, windward corner of a sail.

View the full Wikipedia page for Tack (sailing)
↑ Return to Menu

Port and starboard in the context of Navigation light

A navigation light, also known as a running or position light, is a source of illumination on a watercraft, aircraft or spacecraft, meant to give information on the craft's position, heading, or status. Some navigation lights are colour-coded red and green to aid traffic control by identifying the craft's orientation. Their placement is mandated by international conventions or civil authorities such as the International Maritime Organization (IMO).

A common misconception is that marine or aircraft navigation lights indicate which of two approaching vessels has the "right of way" as in ground traffic; this is not precisely true, as aircraft and watercraft cannot stop to allow each other to pass, as ground vehicles do. However, the red and green colours do indicate which vessel has the duty to "give way" (change course or speed) or to "stand on" (hold course and speed). Consistent with the ground traffic convention, the rightmost of the two vehicles is usually given stand-on status and the leftmost must give way. Therefore a red light is used on the port (left) side to indicate "you must give way"; and a green light on the starboard (right) side indicates "I will give way; you must stand on". In case of two power-driven vessels approaching head-on, both are required to give way.

View the full Wikipedia page for Navigation light
↑ Return to Menu

Port and starboard in the context of Costa Concordia

Costa Concordia (Italian pronunciation: [ˈkɔsta koŋˈkɔrdja]) was a cruise ship operated by the Italian cruise line Costa Crociere. She was the first of her class, followed by her sister ships Costa Serena, Costa Pacifica, Costa Favolosa and Costa Fascinosa, and Carnival Splendor built for Carnival Cruise Line. When the 114,137-ton Costa Concordia and her sister ships entered service, they were among the largest ships built in Italy until the construction of the 130,000 GT Dream-class cruise ships.

On 13 January 2012 at 21:45, Costa Concordia struck a rock in the Tyrrhenian Sea just off the eastern shore of Isola del Giglio. This tore open a 53 m (174 ft) gash on the port side of her hull, which soon flooded parts of the engine room, cutting off power from the engines and ship services. As water flooded in, the ship listed as she drifted back towards the island and grounded near shore, then rolled onto her starboard side, lying in an unsteady position on a rocky underwater ledge.

View the full Wikipedia page for Costa Concordia
↑ Return to Menu