Oxy-fuel welding and cutting in the context of "Gas cylinder"

Play Trivia Questions online!

or

Skip to study material about Oxy-fuel welding and cutting in the context of "Gas cylinder"





👉 Oxy-fuel welding and cutting in the context of Gas cylinder

A gas cylinder is a pressure vessel for storage and containment of gases at above atmospheric pressure. Gas storage cylinders may also be called bottles. Inside the cylinder the stored contents may be in a state of compressed gas, vapor over liquid, supercritical fluid, or dissolved in a substrate material, depending on the physical characteristics of the contents. A typical gas cylinder design is elongated, standing upright on a flattened or dished bottom end or foot ring, with the cylinder valve screwed into the internal neck thread at the top for connecting to the filling or receiving apparatus.

↓ Explore More Topics
In this Dossier

Oxy-fuel welding and cutting in the context of MAPP gas

MAPP gas was a trademarked name, belonging to The Linde Group, a division of the former global chemical giant Union Carbide, for a fuel gas based on a stabilized mixture of methylacetylene (propyne), propadiene and propane. The name comes from the original chemical composition, methylacetylene-propadiene propane. "MAPP gas" is also widely used as a generic name for UN 1060 stabilised methylacetylene-propadiene (unstabilised methylacetylene-propadiene is known as MAPD).

MAPP gas was widely regarded as a safer and easier-to-use substitute for acetylene, but, early in 2008, its production was discontinued at the only remaining plant in North America that still manufactured it. However, there are many MAPP substitutes on the market, often labeled "MAPP", "MAP-X" or "MAP-Plus" but containing mostly propylene with some propane and in some cases also dimethyl ether.

↑ Return to Menu