Ocean floor in the context of "Oceanic trough"

Play Trivia Questions online!

or

Skip to study material about Ocean floor in the context of "Oceanic trough"

Ad spacer

⭐ Core Definition: Ocean floor

The seabed (also known as the seafloor, sea floor, ocean floor, and ocean bottom) is the bottom of the ocean. All floors of the ocean are known as seabeds.

The structure of the seabed of the global ocean is governed by plate tectonics. Most of the ocean is very deep, where the seabed is known as the abyssal plain. Seafloor spreading creates mid-ocean ridges along the center line of major ocean basins, where the seabed is slightly shallower than the surrounding abyssal plain. From the abyssal plain, the seabed slopes upward toward the continents and becomes, in order from deep to shallow, the continental rise, slope, and shelf. The depth within the seabed itself, such as the depth down through a sediment core, is known as the "depth below seafloor". The ecological environment of the seabed and the deepest waters are collectively known, as a habitat for creatures, as the "benthos".

↓ Menu

>>>PUT SHARE BUTTONS HERE<<<
In this Dossier

Ocean floor in the context of Marine geology

Marine geology or geological oceanography is the study of the history and structure of the ocean floor. It involves geophysical, geochemical, sedimentological and paleontological investigations of the ocean floor and coastal zone. Marine geology has strong ties to geophysics and to physical oceanography.

Marine geological studies were of extreme importance in providing the critical evidence for sea floor spreading and plate tectonics in the years following World War II. The deep ocean floor is the last essentially unexplored frontier and detailed mapping in support of economic (petroleum and metal mining), natural disaster mitigation, and academic objectives.

↑ Return to Menu

Ocean floor in the context of Continental margin

A continental margin is the outer edge of continental crust abutting oceanic crust under coastal waters. The continental margin consists of three different features: the continental rise, the continental slope, and the continental shelf. It is one of the three major zones of the ocean floor, the other two being deep-ocean basins and mid-ocean ridges. Continental margins constitute about 28% of the oceanic area.

↑ Return to Menu

Ocean floor in the context of Abyssal plain

An abyssal plain is an underwater plain on the deep ocean floor, usually found at depths between 3,000 and 6,000 metres (9,800 and 19,700 ft). Lying generally between the foot of a continental rise and a mid-ocean ridge, abyssal plains cover more than 50% of the Earth's surface. They are among the flattest, smoothest, and least explored regions on Earth. Abyssal plains are key geologic elements of oceanic basins, the other elements being an elevated mid-ocean ridge and flanking abyssal hills.

The creation of the abyssal plain is the result of the spreading of the seafloor (plate tectonics) and the melting of the lower oceanic crust. Magma rises from above the asthenosphere (a layer of the upper mantle), and as this basaltic material reaches the surface at mid-ocean ridges, it forms new oceanic crust, which is constantly pulled sideways by spreading of the seafloor. Abyssal plains result from the blanketing of an originally uneven surface of oceanic crust by fine-grained sediments, mainly clay and silt. Much of this sediment is deposited by turbidity currents that have been channelled from the continental margins along submarine canyons into deeper water. The rest is composed chiefly of pelagic sediments. Metallic nodules are common in some areas of the plains, with varying concentrations of metals, including manganese, iron, nickel, cobalt, and copper. There are also amounts of carbon, nitrogen, phosphorus and silicon, due to material that comes down and decomposes.

↑ Return to Menu

Ocean floor in the context of Cold seep

A cold seep (sometimes called a cold vent) is an area of the ocean floor where seepage of fluids rich in hydrogen sulfide, methane, and other hydrocarbons occurs, often in the form of a brine pool. Cold does not mean that the temperature of the seepage is lower than that of the surrounding sea water; on the contrary, its temperature is often slightly higher. The "cold" is relative to the very warm (at least 60 °C or 140 °F) conditions of a hydrothermal vent. Cold seeps constitute a biome supporting several endemic species.

Cold seeps develop unique topography over time, where reactions between methane and seawater create carbonate rock formations and reefs. These reactions may also be dependent on bacterial activity. Ikaite, a hydrous calcium carbonate, can be associated with oxidizing methane at cold seeps.

↑ Return to Menu

Ocean floor in the context of Alpha Ridge

The Alpha Ridge is a major volcanic ridge under the Arctic Ocean between the Canada Basin (off Ellesmere Island) and the Lomonosov Ridge. It was active during the formation of the Amerasian Basin. It was discovered in 1963. The highest elevation is about 2,700 m over the ocean floor. It is 200 to 450 km wide. The Alpha Ridge, Lomonosov Ridge, and Nansen-Gakkel Ridge are the three major ranges that divide the Arctic Ocean floor, running generally parallel to each other.

The 1983 Canadian Expedition to Study the Alpha Ridge (CESAR) seemed to establish that the Alpha Ridge is an extension of the continent from Ellesmere Island and hence there is a possibility that Canada may lay claim to the resource rights for the region, in particular for petroleum, according to the United Nations' Law of the Sea. There is no final conclusion to the issue so far, and part of the research planned for the European Drilling Research Icebreaker (Aurora Borealis) was drilling of the Alpha Ridge to collect more data.

↑ Return to Menu

Ocean floor in the context of Lower oceanic crust

The lower oceanic crust is the lower part of the oceanic crust and represents the major part of it (the largest part by volume). It is generally located 4–8 km below the ocean floor and the major lithologies are mafic (ultramafic and gabbroic rocks) which derive from melts rising from the Earth's mantle. This part of the oceanic crust is an important zone for processes such as melt accumulation and melt modification (fractional crystallisation and crustal assimilation). The recycling of this part of the oceanic crust, together with the upper mantle has been suggested as a significant source component for tholeiitic magmas in Hawaiian volcanoes. Although the lower oceanic crust builds the link between the mantle and the MORB, and can't be neglected for the understanding of MORB evolution, the complex processes operating in this zone remain unclear and there is an ongoing debate in Earth Sciences about this. It is 6KM long.

↑ Return to Menu

Ocean floor in the context of Abyssal hill

An abyssal hill is a small hill that rises from the floor of an abyssal plain. They are the most abundant geomorphic structures on Earth, covering more than 30% of the ocean floor. Abyssal hills have relatively sharply defined edges and climb to heights of no more than a few hundred meters. They can be from a few hundred meters to kilometers in width. A region of the abyssal plain that is covered in such hill structures is termed an "abyssal-hills province". However, abyssal hills can also appear in small groups or in isolation.

The greatest abundance of abyssal hills occurs on the floor of thePacific Ocean. These Pacific Ocean hills are typically 50–300 m (160–980 ft) in height, with a width of 2–5 km (1.2–3.1 mi) and a length of 10–20 km (6.2–12.4 mi). They may be created along the flanks of the tectonically active East Pacific Rise as horst-and-graben features, then become stretched out with the passage of time. Abyssal hills may also be areas of thicker oceanic crust that were generated at the mid-ocean ridge during times of increased magma production.

↑ Return to Menu

Ocean floor in the context of Mohorovičić discontinuity

The Mohorovičić discontinuity (/ˌmhəˈrvɪɪ/ MOH-hə-ROH-vih-chitch; Croatian: [moxorôʋiːtʃitɕ]) – usually called the Moho discontinuity, Moho boundary, or just Moho – is the boundary between the crust and the mantle of Earth. It is defined by the distinct change in velocity of seismic waves as they pass through changing densities of rock.

The Moho lies almost entirely within the lithosphere (the hard outer layer of the Earth, including the crust). Only beneath mid-ocean ridges does it define the lithosphere–asthenosphere boundary (the depth at which the mantle becomes significantly ductile). The Mohorovičić discontinuity is 5 to 10 kilometres (3–6 mi) below the ocean floor, and 20 to 90 kilometres (10–60 mi) beneath typical continental crusts, with an average of 35 kilometres (22 mi).

↑ Return to Menu