Load-bearing wall in the context of "Half-timbering"

A skyscraper is a tall building with many habitable floors. Most modern sources define skyscrapers as being at least 100 metres (330 ft) or 150 metres (490 ft) in height, though there is no universally accepted definition, other than being very tall high-rise buildings. Skyscrapers may host offices, hotels, residential spaces, and retail spaces. Skyscrapers are a common feature of large cities, often due to a high demand for space and limited availability of land.

One common feature of skyscrapers is having a steel frame that supports curtain walls. These curtain walls either bear on the framework below or are suspended from the framework above, rather than resting on load-bearing walls of conventional construction. Some early skyscrapers have a steel frame that enables the construction of load-bearing walls taller than those made of reinforced concrete. Modern skyscraper walls are not load-bearing, and most skyscrapers are characterized by large surface areas of windows made possible by steel frames and curtain walls. However, skyscrapers can have curtain walls that mimic conventional walls with a small surface area of windows. Modern skyscrapers often have a tubular structure, and are designed to act like a hollow cylinder to resist wind, seismic, and other lateral loads. To appear more slender, allow less wind exposure and transmit more daylight to the ground, many skyscrapers have a design with setbacks, which in some cases is also structurally required.

Timber framing (German: Fachwerkbauweise) and "post-and-beam" construction are traditional methods of building with heavy timbers, creating structures using squared-off and carefully fitted and joined timbers with joints secured by large wooden pegs. If the structural frame of load-bearing timber is left exposed on the exterior of the building it may be referred to as half-timbered, and in many cases the infill between timbers will be used for decorative effect. The country most known for this kind of architecture is Germany, where timber-framed houses are spread all over the country.

The method comes from working directly from logs and trees rather than pre-cut dimensional lumber. Artisans or framers would gradually assemble a building by hewing logs or trees with broadaxes, adzes, and draw knives and by using woodworking tools, such as hand-powered braces (brace and bit) and augers.

A party wall (occasionally parti-wall or parting wall, shared wall, also known as common wall or as a demising wall) is a wall shared by two adjoining properties. Typically, the builder lays the wall along a property line dividing two terraced houses, so that one half of the wall's thickness lies on each side. This type of wall is usually structural. Party walls can also be formed by two abutting walls built at different times. The term can be also used to describe a division between separate units within a multi-unit apartment complex. Very often the wall in this case is non-structural but designed to meet established criteria for sound and/or fire protection, i.e. a firewall.

High-tech architecture, also known as structural expressionism, is a type of late modernist architecture that emerged in the 1970s, incorporating elements of high tech industry and technology into building design. High-tech architecture grew from the modernist style, utilizing new advances in technology and building materials. It emphasizes transparency in design and construction, seeking to communicate the underlying structure and function of a building throughout its interior and exterior. High-tech architecture makes extensive use of aluminium, steel, glass, and to a lesser extent concrete (the technology for which had developed earlier), as these materials were becoming more advanced and available in a wider variety of forms at the time the style was developing – generally, advancements in a trend towards lightness of weight.

High-tech architecture focuses on creating adaptable buildings through choice of materials, internal structural elements, and programmatic design. It seeks to avoid links to the past, and as such eschews building materials commonly used in older styles of architecture. Common elements include hanging or overhanging floors, a lack of internal load-bearing walls, and reconfigurable spaces. Some buildings incorporate prominent, bright colors in an attempt to evoke the sense of a drawing or diagram. High-tech utilizes a focus on factory aesthetics and a large central space serviced by many smaller maintenance areas to evoke a feeling of openness, honesty, and transparency.

Traditional Japanese architecture uses post-and-lintel structures – vertical posts, connected by horizontal beams. Rafters are traditionally the only structural member used in Japanese timber framing that are neither horizontal nor vertical. The rest of the structure is non-load-bearing.

While fixed walls are used, a variety of movable partitions are also used to fill the spaces between the pillars. They may be free-standing, hung from lintels, or, especially in later buildings, sliding panels which can readily be removed from their grooves. Their type, number, and position are adjusted according to the weather without and the activities within. They are used to modify the view, light, temperature, humidity, and ventilation, and to divide the interior space.