Lead (electronics) in the context of "Electrical component"

Surface-mount technology (SMT), originally called planar mounting, is a method in which the electrical components are mounted directly onto the surface of a printed circuit board (PCB). An electrical component mounted in this manner is referred to as a surface-mount device (SMD). In industry, this approach has largely replaced through-hole technology construction method of fitting components, in large part because SMT allows for increased manufacturing automation which reduces cost and improves quality. It also allows for more components to fit on a given area of substrate. Both technologies can be used on the same board, with the through-hole technology often used for components not suitable for surface mounting such as large transformers and heat-sinked power semiconductors.

An SMT component is usually smaller than its through-hole counterpart because it has either smaller leads or no leads at all. It may have short pins or leads of various styles, flat contacts, a matrix of solder balls (BGAs), or terminations on the body of the component.

An electronic component is any basic discrete electronic device or physical entity part of an electronic system used to affect electrons or their associated fields. Electronic components are mostly industrial products, available in a singular form and are not to be confused with electrical elements, which are conceptual abstractions representing idealized electronic components and elements. A datasheet for an electronic component is a technical document that provides detailed information about the component's specifications, characteristics, and performance. Discrete circuits are made of individual electronic components that only perform one function each as packaged, which are known as discrete components, although strictly the term discrete component refers to such a component with semiconductor material such as individual transistors.

Electronic components have a number of electrical terminals or leads. These leads connect to other electrical components, often over wire, to create an electronic circuit with a particular function (for example an amplifier, radio receiver, or oscillator). Basic electronic components may be packaged discretely, as arrays or networks of like components, or integrated inside of packages such as semiconductor integrated circuits, hybrid integrated circuits, or thick film devices. The following list of electronic components focuses on the discrete version of these components, treating such packages as components in their own right.

Deep brain stimulation (DBS) is a type of neurostimulation therapy in which an implantable pulse generator is surgically implanted below the skin of the chest and connected by leads to the brain to deliver controlled electrical impulses. These charges therapeutically disrupt and promote dysfunctional nervous system circuits bidirectionally in both ante- and retrograde directions. Though first developed for Parkinsonian tremor, the technology has since been adapted to a wide variety of chronic neurologic disorders.

The exact mechanisms of DBS are complex and not fully understood, though it is thought to mimic the effects of lesioning by disrupting pathologically elevated and oversynchronized informational flow in misfiring brain networks. As opposed to permanent ablation, the effect can be reversed by turning off the DBS device. Common targets include the globus pallidus, ventral nuclear group of the thalamus, internal capsule, and subthalamic nucleus. It is one of the few neurosurgical procedures that allows blinded experiments, although most studies to date have not taken advantage of this discriminant.