Intrusive rock in the context of Types of volcanic eruptions


Intrusive rock in the context of Types of volcanic eruptions

Intrusive rock Study page number 1 of 3

Play TriviaQuestions Online!

or

Skip to study material about Intrusive rock in the context of "Types of volcanic eruptions"


⭐ Core Definition: Intrusive rock

Intrusive rock is formed when magma penetrates existing rock, crystallizes, and solidifies underground to form intrusions, such as batholiths, dikes, sills, laccoliths, and volcanic necks.

Intrusion is one of the two ways igneous rock can form. The other is extrusion, such as a volcanic eruption or similar event. An intrusion is any body of intrusive igneous rock, formed from magma that cools and solidifies within the crust of the planet. In contrast, an extrusion consists of extrusive rock, formed above the surface of the crust.

↓ Menu
HINT:

In this Dossier

Intrusive rock in the context of Porphyritic

Porphyritic is an adjective used in geology to describe igneous rocks with a distinct difference in the size of mineral crystals, with the larger crystals known as phenocrysts. Both extrusive and intrusive rocks can be porphyritic, meaning all types of igneous rocks can display some degree of porphyritic texture. Most porphyritic rocks have bimodal size ranges, meaning the rock is composed of two distinct sizes of crystal.

In extrusive rocks, the phenocrysts are surrounded by a fine-grained (aphanitic) matrix or groundmass of volcanic glass or non-visible crystals, commonly seen in porphyritic basalt. Porphyritic intrusive rocks have a matrix with individual crystals easily distinguished with the eye, but one group of crystals appearing clearly much bigger than the rest, as in a porphyritic granite.

View the full Wikipedia page for Porphyritic
↑ Return to Menu

Intrusive rock in the context of Feldspar

Feldspar (/ˈfɛl(d).ˌspɑːr/ FEL(D)-spar; sometimes spelled felspar) is a group of rock-forming aluminium tectosilicate minerals, also containing other cations such as sodium, calcium, potassium, or barium. The most common members of the feldspar group are the plagioclase (sodium-calcium) feldspars and the alkali (potassium-sodium) feldspars. Feldspars make up about 60% of the Earth's crust and 41% of the Earth's continental crust by weight.

Feldspars crystallize from magma as both intrusive and extrusive igneous rocks and are also present in many types of metamorphic rock. Rock formed almost entirely of calcic plagioclase feldspar is known as anorthosite. Feldspars are also found in many types of sedimentary rocks.

View the full Wikipedia page for Feldspar
↑ Return to Menu

Intrusive rock in the context of Syenite

Syenite is a coarse-grained intrusive igneous rock with a general composition similar to that of granite, but deficient in quartz, which, if present at all, occurs in relatively small concentrations (< 5%). It is considered a granitoid. Some syenites contain larger proportions of mafic components and smaller amounts of felsic material than most granites; those are classed as being of intermediate composition.

The extrusive equivalent of syenite is trachyte.

View the full Wikipedia page for Syenite
↑ Return to Menu

Intrusive rock in the context of Granite

Granite (/ˈɡræ.nɪt/, GRAN-it) is a coarse-grained (phaneritic) intrusive igneous rock composed mostly of quartz, alkali feldspar, and plagioclase. It forms from magma with a high content of silica and alkali metal oxides that slowly cools and solidifies underground. It is common in the continental crust of Earth, where it is found in igneous intrusions. These range in size from dikes only a few centimeters across to batholiths exposed over hundreds of square kilometers.

Granite is typical of a larger family of granitic rocks, or granitoids, that are composed mostly of coarse-grained quartz and feldspars in varying proportions. These rocks are classified by the relative percentages of quartz, alkali feldspar, and plagioclase (the QAPF classification), with true granite representing granitic rocks rich in quartz and alkali feldspar. Most granitic rocks also contain mica or amphibole minerals, though a few (known as leucogranites) contain almost no dark minerals.

View the full Wikipedia page for Granite
↑ Return to Menu

Intrusive rock in the context of Igneous rock

Igneous rock (igneous from Latin igneus 'fiery'), or magmatic rock, is one of the three main rock types, the others being sedimentary and metamorphic. Igneous rocks are formed through the cooling and solidification of magma or lava.

The magma can be derived from partial melts of existing rocks in a terrestrial planet's mantle or crust. Typically, the melting is caused by one or more of three processes: an increase in temperature, a decrease in pressure, or a change in composition. Solidification into rock occurs either below the surface as intrusive rocks or on the surface as extrusive rocks. Igneous rock may form with crystallization to form granular, crystalline rocks, or without crystallization to form natural glasses.

View the full Wikipedia page for Igneous rock
↑ Return to Menu

Intrusive rock in the context of Carbonate rock

Carbonate rocks are a class of sedimentary rocks composed primarily of carbonate minerals. The two major types are limestone, which is composed of calcite or aragonite (different crystal forms of CaCO3), and dolomite rock (also known as dolostone), which is composed of dolomite (CaMg(CO3)2). They are usually classified on the basis of texture and grain size. Importantly, carbonate rocks can exist as metamorphic and igneous rocks, too. When recrystallized carbonate rocks are metamorphosed, marble is created. Rare igneous carbonate rocks even exist as intrusive carbonatites and, even rarer, there exists volcanic carbonate lava.

Carbonate rocks are also crucial components to understanding geologic history due to processes such as diagenesis in which carbonates undergo compositional changes based on kinetic effects. The correlation between this compositional change and temperature can be exploited to reconstruct past climate as is done in paleoclimatology. Carbonate rocks can also be used for understanding various other systems as described below.

View the full Wikipedia page for Carbonate rock
↑ Return to Menu

Intrusive rock in the context of Large igneous province

A large igneous province (LIP) is an extremely large accumulation of igneous rocks, including intrusive (sills, dikes) and extrusive (lava flows, tephra deposits), arising when magma travels through the crust towards the surface. The formation of LIPs is variously attributed to mantle plumes or to processes associated with divergent plate tectonics. The formation of some of the LIPs in the past 500 million years coincide in time with mass extinctions and rapid climatic changes, which has led to numerous hypotheses about causal relationships. LIPs are fundamentally different from any other currently active volcanoes or volcanic systems.

View the full Wikipedia page for Large igneous province
↑ Return to Menu

Intrusive rock in the context of Dike (geology)

In geology, a dike or dyke is a sheet of rock that is formed in a fracture of a pre-existing rock body. Dikes can be either magmatic or sedimentary in origin. Magmatic dikes form when magma flows into a crack then solidifies as a sheet intrusion, either cutting across layers of rock or through a contiguous mass of rock. Clastic dikes are formed when sediment fills a pre-existing crack.

View the full Wikipedia page for Dike (geology)
↑ Return to Menu

Intrusive rock in the context of Troctolite

Troctolite /ˈtrɒktəlt/ (from Greek τρώκτης 'trout' and λίθος 'stone') is a mafic intrusive rock type. It consists essentially of major but variable amounts of olivine and calcic plagioclase along with minor pyroxene. It is an olivine-rich anorthosite, or a pyroxene-depleted relative of gabbro. However, unlike gabbro, no troctolite corresponds in composition to a partial melt of peridotite. Thus, troctolite is necessarily a cumulate of crystals that have fractionated from melt.

Troctolite is found in some layered intrusions such as in the Archean Windimurra intrusion of Western Australia, the Voisey's Bay nickel-copper-cobalt magmatic sulfide deposit of northern Labrador, the Stillwater igneous complex of Montana, the Duluth Complex of the North American Midcontinent Rift, and the Tertiary Rhum layered intrusion of the island of Rùm, Scotland. Troctolite is also found, for example, in the Merensky Reef of the Bushveld Igneous Complex, South Africa and in the Lizard complex in Cornwall.

View the full Wikipedia page for Troctolite
↑ Return to Menu

Intrusive rock in the context of Extrusive rock

Extrusive rock refers to the mode of igneous volcanic rock formation in which hot magma from inside the Earth flows out (extrudes) onto the surface as lava or explodes violently into the atmosphere to fall back as pyroclastics or tuff. In contrast, intrusive rock refers to rocks formed by magma which cools below the surface.

The main effect of extrusion is that the magma can cool much more quickly in the open air or under seawater, and there is little time for the growth of crystals. Sometimes, a residual portion of the matrix fails to crystallize at all, instead becoming a natural glass like obsidian.

View the full Wikipedia page for Extrusive rock
↑ Return to Menu

Intrusive rock in the context of Subvolcanic rock

A subvolcanic rock, also known as a hypabyssal rock, is an intrusive igneous rock that is emplaced at depths less than 2 km (1.2 mi) within the crust, and has intermediate grain size and often porphyritic texture between that of volcanic rocks, which are extrusive igneous rocks, and plutonic rocks, which form much deeper in the ground. Subvolcanic rocks include diabase (also known as dolerite) and porphyry. Common examples of subvolcanic rocks are diabase, quartz dolerite, microgranite, and diorite.

View the full Wikipedia page for Subvolcanic rock
↑ Return to Menu

Intrusive rock in the context of Intermediate composition

In igneous petrology, an intermediate composition refers to the chemical composition of a rock that has 51.5–63 wt% SiO2 being an intermediate between felsic and mafic compositions. Typical intermediate rocks include andesite and trachyandesite among volcanic rocks and diorite and granodiorite among plutonic rocks.

View the full Wikipedia page for Intermediate composition
↑ Return to Menu

Intrusive rock in the context of Diorite

Diorite (/ˈd.ərt/ DY-ə-ryte) is an intrusive igneous rock formed by the slow cooling underground of magma (molten rock) that has a moderate content of silica and a relatively low content of alkali metals. It is intermediate in composition between low-silica (mafic) gabbro and high-silica (felsic) granite.

Diorite is found in mountain-building belts (orogens) on the margins of continents. It has the same composition as the fine-grained volcanic rock, andesite, which is also common in orogens.

View the full Wikipedia page for Diorite
↑ Return to Menu

Intrusive rock in the context of Anorthosite

Anorthosite (/əˈnɔːrθəst/) is a phaneritic, intrusive igneous rock characterized by its composition: mostly plagioclase feldspar (90–100%), with a minimal mafic component (0–10%). Pyroxene, ilmenite, magnetite, and olivine are the mafic minerals most commonly present.

Anorthosites are of enormous geologic interest, because it is still not fully understood how they form. Most models involve separating plagioclase crystals based on their density. Plagioclase crystals are usually less dense than magma; so, as plagioclase crystallizes in a magma chamber, the plagioclase crystals float to the top, concentrating there.

View the full Wikipedia page for Anorthosite
↑ Return to Menu

Intrusive rock in the context of Magma series

In geology, igneous differentiation, or magmatic differentiation, is an umbrella term for the various processes by which magmas undergo bulk chemical change during the partial melting process, cooling, emplacement, or eruption. The sequence of (usually increasingly silicic) magmas produced by igneous differentiation is known as a magma series.

View the full Wikipedia page for Magma series
↑ Return to Menu

Intrusive rock in the context of Intrusion

In geology, an igneous intrusion (or intrusive body or simply intrusion) is a body of intrusive igneous rock that forms by crystallization of magma slowly cooling below the surface of the Earth. Intrusions have a wide variety of forms and compositions, illustrated by examples like the Palisades Sill of New York and New Jersey; the Henry Mountains of Utah; the Bushveld Igneous Complex of South Africa; Shiprock in New Mexico; the Ardnamurchan intrusion in Scotland; and the Sierra Nevada Batholith of California.

Because the solid country rock into which magma intrudes is an excellent insulator, cooling of the magma is extremely slow, and intrusive igneous rock is coarse-grained (phaneritic). Intrusive igneous rocks are classified separately from extrusive igneous rocks, generally on the basis of their mineral content. The relative amounts of quartz, alkali feldspar, plagioclase, and feldspathoid is particularly important in classifying intrusive igneous rocks.

View the full Wikipedia page for Intrusion
↑ Return to Menu