Datum reference in the context of "Datum (geodesy)"

A geodetic datum or geodetic system (also: geodetic reference datum, geodetic reference system, or geodetic reference frame, or terrestrial reference frame) is a global datum reference or reference frame for unambiguously representing the position of locations on Earth by means of either geodetic coordinates (and related vertical coordinates) or geocentric coordinates. Datums are crucial to any technology or technique based on spatial location, including geodesy, navigation, surveying, geographic information systems, remote sensing, and cartography. A horizontal datum is used to measure a horizontal position, across the Earth's surface, in latitude and longitude or another related coordinate system. A vertical datum is used to measure the elevation or depth relative to a standard origin, such as mean sea level (MSL). A three-dimensional datum enables the expression of both horizontal and vertical position components in a unified form. The concept can be generalized for other celestial bodies as in planetary datums.

Since the rise of the global positioning system (GPS), the ellipsoid and datum WGS 84 it uses has supplanted most others in many applications. The WGS 84 is intended for global use, unlike most earlier datums.Before GPS, there was no precise way to measure the position of a location that was far from reference points used in the realization of local datums, such as from the Prime Meridian at the Greenwich Observatory for longitude, from the Equator for latitude, or from the nearest coast for sea level. Astronomical and chronological methods have limited precision and accuracy, especially over long distances. Even GPS requires a predefined framework on which to base its measurements, so WGS 84 essentially functions as a datum, even though it is different in some particulars from a traditional standard horizontal or vertical datum.

A plumb bob, plumb bob level, or plummet, is a weight, usually with a pointed tip on the bottom, suspended from a string and used as a vertical direction as a reference line, or plumb-line. It is a precursor to the spirit level and used to establish a vertical datum. It is typically made of stone, wood, or lead, but can also be made of other metals. If it is used for decoration, it may be made of bone or ivory.

The instrument has been used since at least the time of ancient Egypt to ensure that constructions are "plumb", or vertical. It is also used in surveying, to establish the nadir (opposite of zenith) with respect to gravity of a point in space. It is used with a variety of instruments (including levels, theodolites, and steel tapes) to set the instrument exactly over a fixed survey marker or to transcribe positions onto the ground for placing a marker.

A bearing surface in mechanical engineering is the area of contact between two objects. It usually is used in reference to bolted joints and bearings, but can be applied to a wide variety of engineering applications. The choice of bearing surface depends on the application, load, speed, and operating conditions, and the design must be able to withstand high loads, resist wear and corrosion, and operate at high speeds.

On a screw, the bearing area loosely refers to the underside of the head. Strictly speaking, the bearing area refers to the area of the screw head that directly bears on the part being fastened.

A water level (Greek: Aλφαδολάστιχο or (υδροστάθμη) [Alfadolasticho]) is a siphon utilizing two or more parts of the liquid water surface to establish a local horizontal line or plane of reference. It is used to determine the apparent inclination of an object or surface and for matching water level elevations at locations that are too far apart for a spirit level to span.

The simplest water level is a section of clear tubing, partially filled with water. Water is easily procured for use, and easily discarded after use. The ends are held vertical, and the rest of the tubing lies on the ground or floor. The water level at each end of the tube will be at the same elevation, whether the two ends are adjacent or far apart, so a line between them will be horizontal at its midpoint and a shed base, building foundation or similar structure laid out using several such lines will be "horizontal" within building tolerances on any scale over which use of a water level is practicable. Water levels have been used for many years. The water level is lower-tech than the laser level, but it can be more accurate over long distances, and works without a sightline, such as around corners. To avoid error, all of the water should be at the same temperature. Other sources of error include difficulty reading due to meniscus.