Cymbal in the context of Forged

An orchestra (/ˈɔːrkɪstrə/ ; OR-ki-strə) is a large instrumental ensemble typical of classical music, which combines instruments from different families. There are typically four main sections of instruments:

• The string section, including the violin, viola, cello, and double bass
• The woodwind section, including the flute, oboe, clarinet, bassoon, and occasionally saxophone
• The brass section, including the French horn (commonly known as the "horn"), trumpet, trombone, cornet, and tuba, and sometimes euphonium
• The percussion section, including the timpani, snare drum, bass drum, cymbals, triangle, tambourine, tam-tam and mallet percussion instruments

Other instruments such as the piano, harpsichord, pipe organ, and celesta may sometimes appear in a fifth keyboard section or may stand alone as soloist instruments, as may the concert harp and, for performances of some modern compositions, electronic instruments, and guitars.

The drum is a member of the percussion group of musical instruments. In the Hornbostel–Sachs classification system, it is a membranophone. Drums consist of at least one membrane, called a drumhead or drum skin, that is stretched over a shell and struck, either directly with the player's hands, or with a percussion mallet, to produce sound. There is usually a resonant head on the underside of the drum. Other techniques have been used to cause drums to make sound, such as the thumb roll. Drums are the world's oldest and most ubiquitous musical instruments, and the basic design has remained virtually unchanged for thousands of years.

Drums may be played individually, with the player using a single drum, and some drums such as the djembe are almost always played in this way. Others are normally played in a set of two or more, all played by one player, such as bongo drums and timpani. A number of different drums together with cymbals form the basic modern drum kit. Many drums are played together with other instruments.

Forging is a manufacturing process involving the shaping of metal using localized compressive forces. The blows are delivered with a hammer (often a power hammer) or a die. Forging is often classified according to the temperature at which it is performed: cold forging (a type of cold working), warm forging, or hot forging (a type of hot working). For the latter two, the metal is heated, usually in a forge. Forged parts can range in weight from less than a kilogram to hundreds of metric tons. Forging has been done by smiths for millennia; the traditional products were kitchenware, hardware, hand tools, edged weapons, cymbals, and jewellery.

Since the Industrial Revolution, forged parts are widely used in mechanisms and machines wherever a component requires high strength; such forgings usually require further processing (such as machining) to achieve a finished part. Today, forging is a major worldwide industry.

An unpitched percussion instrument is a percussion instrument played in such a way as to produce sounds of indeterminate pitch, or an instrument normally played in this fashion.

Unpitched percussion is typically used to maintain a rhythm or to provide accents, and its sounds are unrelated to the melody and harmony of the music. Within the orchestra, unpitched percussion is termed auxiliary percussion, and this subsection of the percussion section includes all unpitched instruments of the orchestra however they are played, for example the pea whistle and siren.

A drum kit, acoustic drum kit or drum set (also known as a trap set, or simply drums in popular music and jazz contexts) is a musical instrument consisting of a collection of percussion instruments arranged to be played by a single musician. It typically includes drums, cymbals, and sometimes other auxiliary percussion instruments. The drummer usually plays while seated on a drum throne, using drumsticks or special wire or nylon brushes to strike the drums and cymbals, as well as pedals to operate the bass drum and hi-hat, allowing them to adapt the sound to their desired effect.

The drum set is not standardized, but usually consists of:

A one-man band is a musician who plays a number of instruments simultaneously using their hands, feet, limbs, and various mechanical or electronic contraptions. One-man bands also often sing while they perform.

The simplest type of "one-man band" is a singer accompanying themselves on acoustic guitar and playing a harmonica mounted in a metal "harp rack" below the mouth. This approach is often taken by buskers and folk music singer-guitarists. More complicated setups may include wind instruments strapped around the neck, a large bass drum mounted on the musician's back with a beater which is connected to a foot pedal, cymbals strapped between the knees or triggered by a pedal mechanism, tambourines and maracas tied to the limbs, and a stringed instrument strapped over the shoulders (e.g., a banjo, ukulele or guitar).

The washboard and frottoir (from Louisiana French "frotter", to rub) are used as a percussion instrument, employing the ribbed metal surface of the cleaning device as a rhythm instrument. As traditionally used in jazz, zydeco, skiffle, jug band, and old-time music, the washboard remained in its wooden frame and is played primarily by tapping, but also scraping the washboard with thimbles. Often the washboard has additional traps, such as a wood block, a cowbell, and even small cymbals.

Conversely, the frottoir (zydeco rubboard) dispenses with the frame and consists simply of the metal ribbing hung around the neck. It is played primarily with spoon handles or bottle openers in a combination of strumming, scratching, tapping and rolling.

A drummer is a percussionist who creates music using drums. Most contemporary western bands that play rock, pop, jazz, or R&B music include a drummer for purposes including timekeeping and embellishing the musical timbre. The drummer's equipment includes a drum kit (or "drum set" or "trap set"), which includes various drums, cymbals and an assortment of accessory hardware such as pedals, standing support mechanisms, and drum sticks.

Particularly in the traditional music of many countries, drummers use individual drums of various sizes and designs rather than drum kits. Some use only their hands to strike the drums.

In music, inharmonicity is the degree to which the frequencies of overtones (also known as partials or partial tones) depart from whole multiples of the fundamental frequency (harmonic series).

Acoustically, a note perceived to have a single distinct pitch in fact contains a variety of additional overtones. Many percussion instruments, such as cymbals, tam-tams, and chimes, create complex and inharmonic sounds.

Bhajan is an Indian term for any devotional song with a religious theme or spiritual ideas, specifically among Dharmic religions, in any language. The term bhajanam (Sanskrit: भजनम्) means reverence and originates from the root word bhaj (Sanskrit: भज्), which means to revere, as in 'Bhaja Govindam' (Revere Govinda). The term bhajana also means sharing.

The term bhajan is also commonly used to refer to a group event, with one or more lead singers, accompanied with music, and sometimes dancing. Normally, bhajans are accompanied by percussion instruments such as tabla, dholak or a tambourine. Handheld small cymbals (kartals) are also commonly used to maintain the beat. A bhajan may be sung in a temple, in a home, under a tree in the open, near a river bank or a place of historic significance. A group of bhajan performers may be known as a maṇḍalī.

A hi-hat, hihat, or high-hat is a combination of two cymbals and a pedal, all mounted on a metal stand. It is a part of the standard drum kit used by drummers in many styles of music including rock, pop, jazz, and blues. Hi-hats consist of a matching pair of small to medium-sized cymbals mounted on a stand, with the two cymbals facing each other. The bottom cymbal is fixed and the top is mounted on a rod which moves the top cymbal toward the bottom one when the pedal is depressed (a hi-hat that is in this position is said to be "closed" or "closed hi-hats").

The cymbals may be played by closing them together with the pedal, which creates a "chck" sound or striking them with a stick, which may be done with them open, closed, open and then closed after striking to dampen the ring, or closed and then opened to create a shimmering effect at the end of the note. Depending on how hard a hi-hat is struck and whether it is "open" (i.e., pedal not pressed, so the two cymbals are not closed together), a hi-hat can produce a range of dynamics, from very quiet "chck" (or "chick") sounds, done with merely gently pressing the pedal—this is suitable for soft accompaniment during a ballad or the start of a guitar solo—to very loud (e.g. striking fully open hats hard with sticks, a technique used in loud heavy metal music songs).

A crash cymbal is a type of cymbal that produces a loud, sharp "crash" and is used mainly for occasional accents, as opposed to a ride cymbal. It can be mounted on a stand and played with a drum stick, or by hand in pairs. One or two crash cymbals are a standard part of a drum kit. Suspended crash cymbals are also used in bands and orchestras, either played with a drumstick or rolled with a pair of mallets to produce a slower, swelling crash. Sometimes a drummer may hit two different crash cymbals in a kit at the same time to produce a very loud accent, usually in rock music.

Although crash cymbals range in thickness from paper-thin to very heavy, all crash cymbals have a fairly thin edge. They are typically 14 to 18 inches (36 to 46 cm) in diameter, but sizes down to 8 inches (20 cm) and up to 24 inches (61 cm) are manufactured. Custom crash cymbals up to 28 inches (71 cm) in diameter have been used by big bands. Different thicknesses are used for different kinds of music, and the alloy for each manufacturer's models varies. A thick cymbal is likely to be used by a metal or rock band, while thinner cymbals are generally used in lighter rock. Darker crashes are best used for jazz.

A suspended cymbal is any single cymbal played with a stick or beater rather than struck against another cymbal. Common abbreviations used are "sus. cym.," or "sus. cymb." (with or without the period).

Most drum kits contain at least two suspended cymbals: a crash cymbal and a ride cymbal.