Cordless telephone in the context of Wireless Internet

Wireless communication (or just wireless, when the context allows) is the transfer of information (telecommunication) between two or more points without the use of an electrical conductor, optical fiber or other continuous guided medium for the transfer. The most common wireless technologies use radio waves. With radio waves, intended distances can be short, such as a few meters for Bluetooth, or as far as millions of kilometers for deep-space radio communications. It encompasses various types of fixed, mobile, and portable applications, including two-way radios, cellular telephones, and wireless networking. Other examples of applications of radio wireless technology include GPS units, garage door openers, wireless computer mice, keyboards and headsets, headphones, radio receivers, satellite television, broadcast television and cordless telephones. Somewhat less common methods of achieving wireless communications involve other electromagnetic phenomena, such as light and magnetic or electric fields, or the use of sound.

The term wireless has been used twice in communications history, with slightly different meanings. It was initially used from about 1890 for the first radio transmitting and receiving technology, as in wireless telegraphy, until the new word radio replaced it around 1920. Radio sets in the UK and the English-speaking world that were not portable continued to be referred to as wireless sets into the 1960s. The term wireless was revived in the 1980s and 1990s mainly to distinguish digital devices that communicate without wires, such as the examples listed in the previous paragraph, from those that require wires or cables. This became its primary usage in the 2000s, due to the advent of technologies such as mobile broadband, Wi-Fi, and Bluetooth.

The C band is a designation by the Institute of Electrical and Electronics Engineers (IEEE) for a portion of the electromagnetic spectrum in the microwave range of frequencies ranging from 4.0 to 8.0 gigahertz (GHz). However, the U.S. Federal Communications Commission C band proceeding and auction, designated 3.7–4.2 GHz as C band. The C band is used for many satellite communications transmissions, some cordless telephones, as well as some radar and weather radar systems.

The C band contains the 5.725 - 5.875 GHz ISM band allowing unlicensed use by low power devices, such as garage door openers, wireless doorbells, and baby monitors. A very large use is by the high frequency (5.2 GHz) band of Wi-Fi (IEEE 802.11a) wireless computer networks. These are the most widely used computer networks in the world, used to allow laptops, smartphones, printers and TVs to connect to the internet through a wireless router in home and small office networks, and access points in hotels, libraries, and coffee shops.

Digital Enhanced Cordless Telecommunications (DECT) is a cordless telephony standard maintained by ETSI. It originated in Europe, where it is the common standard, replacing earlier standards, such as CT1 and CT2. Since the DECT-2020 standard onwards, it also includes IoT communication.

Beyond Europe, it has been adopted by Australia and most countries in Asia and South America. North American adoption was delayed by United States radio-frequency regulations. This forced development of a variation of DECT called DECT 6.0, using a slightly different frequency range, which makes these units incompatible with systems intended for use in other areas, even from the same manufacturer. DECT has almost completely replaced other standards in most countries where it is used, with the exception of North America.

The Family Radio Service (FRS) is a walkie-talkie radio system authorized in the United States since 1996. This personal radio service uses channelized frequencies around 462 and 467 MHz in the ultra high frequency (UHF) band. It does not suffer the interference effects found on citizens' band (CB) at 27 MHz, or the 49 MHz band also used by cordless telephones, toys, and baby monitors. FRS uses frequency modulation (FM) instead of amplitude modulation (AM). Since the UHF band has different radio propagation characteristics, short-range use of FRS may be more predictable than the more powerful license-free radios operating in the HF CB band.

Initially proposed by RadioShack in 1994 for use by families, FRS gained consumer popularity due to the lack of monthly fees (unlike cell phones) and being inexpensive to buy the radios. It has also seen significant adoption by business interests, as an unlicensed, low-cost alternative to the business band. New rules issued by the FCC in May 2017 clarify and simplify the overlap between FRS and General Mobile Radio Service (GMRS) radio services, GMRS providing a much improved range over FRS.

The term cordless is generally used to refer to electrical or electronic devices that are powered by a battery or battery pack and can operate without a power cord or cable attached to an electrical outlet to provide mains power, allowing greater mobility.The term "cordless" should not be confused with the term "wireless", although it often is in common usage, possibly because some cordless devices (e.g., cordless telephones) are also wireless. The term "wireless" generally refers to devices that use some form of energy (e.g., radio waves, infrared, ultrasonic, etc.) to transfer information or commands over a distance without the use of communication wires, regardless of whether the device gets its power from a power cord or a battery. The term "portable" is an even more general term and, when referring to electrical and electronic devices, usually means devices which are totally self-contained (e.g., have built-in power supplies, have no base unit, etc.) and which may also use wireless technology.

VTech Holdings Limited (an abbreviation of Video Technology Limited or simply VTech) is a Hong Kong children's product manufacturer. It is also the world's largest manufacturer of baby monitors and cordless phones. It was founded in October 1976 by Allan Wong (Chi-Yun) and Stephen Leung.

CT1 (Cordless telephone generation 1) was the first-generation analog cordless telephone standard that was developed by the European Conference of Postal and Telecommunications Administrations (CEPT) in 1984 and used primarily in Europe. The standard defined the technical and operational characteristics for cordless telephones, allowing a wireless handset to communicate with a base station that is connected to the public telephone network. The original frequency allocation included 40 duplex channels using 25 kHz separation, with handsets transmitting in the 914-915 MHz band and base stations transmitting n the 959-960 MHz band. These frequencies overlap with those used by channels 120-124 on GSM cellular phones and thus these original frequencies have been withdrawn from use for cordless phones in the countries that originally authorized them.

CT1+ provided in 1987 for a set of 80 additional channels using the same technical standard with 885–887 MHz used by the phones and 930–932 MHz used by the base stations. The introduction of CT1+ was driven by the increasing demand for cordless telephone channels, as the original 40 channels proved insufficient to support the growing number of users without severe interference problems when multiple handsets operated in the same area. While not part of the original GSM-900 band, the frequencies do overlap with the extended GSM-900 band.