Cable railway in the context of "Trains"

A train (from Old French trahiner, from Latin trahere, "to pull, to draw") is a series of connected vehicles that run along a railway track and transport people or freight. Trains are typically pulled or pushed by locomotives (often known simply as "engines"), though some are self-propelled, such as multiple units or railcars. Passengers and cargo are carried in railroad cars, also known as wagons or carriages. Trains are designed to a certain gauge, or distance between rails. Most trains operate on steel tracks with steel wheels, the low friction of which makes them more efficient than other forms of transport. Many countries use rail transport.

Trains have their roots in wagonways, which used railway tracks and were powered by horses or pulled by cables. Following the invention of the steam locomotive in the United Kingdom in 1802, trains rapidly spread around the world, allowing freight and passengers to move over land faster and cheaper than ever possible before. Rapid transit and trams were first built in the late 1800s to transport large numbers of people in and around cities. Beginning in the 1920s, and accelerating following World War II, diesel and electric locomotives replaced steam as the means of motive power. Following the development of cars, trucks, and extensive networks of highways which offered greater mobility, as well as faster airplanes, trains declined in importance and market share, and many rail lines were abandoned. The spread of buses led to the closure of many rapid transit and tram systems during this time as well.

A passing loop (UK usage) or passing siding (North America) (also called a crossing loop, crossing place, refuge loop or, colloquially, a hole) is a place on a single line railway or tramway, often located at or near a station, where trains or trams travelling in opposite directions can pass each other. Trains/trams going in the same direction can also overtake, provided that the signalling arrangement allows it. A passing loop is double-ended and connected to the main track at both ends, though a dead end siding known as a refuge siding, which is much less convenient, can be used. A similar arrangement is used on the gauntlet track of cable railways and funiculars, and in passing places on single-track roads.

Ideally, the loop should be longer than all trains needing to cross at that point. Unless the loop is of sufficient length to be dynamic, the first train to arrive must stop or move very slowly, while the second to arrive may pass at speed. If one train is too long for the loop it must wait for the opposing train to enter the loop before proceeding, taking a few minutes. Ideally, the shorter train should arrive first and leave second. If both trains are too long for the loop, time-consuming "see-sawing" (or "double saw-by") operations are required for the trains to cross (see Tawa railway station).

The Liverpool and Manchester Railway (L&MR) was the first inter-city railway in the world. It opened on 15 September 1830 between the Lancashire towns of Liverpool and Manchester in England. It was also the first railway to rely exclusively on locomotives driven by steam power, with no horse-drawn traffic permitted at any time; the first to be entirely double track throughout its length; the first to have a true signalling system; the first to be fully timetabled; and the first to carry mail.

Trains were hauled by company steam locomotives between the two towns, though private wagons and carriages were allowed. Cable haulage of freight trains was down the steeply-graded 1.26-mile (2.03 km) Wapping Tunnel to Liverpool Docks from Edge Hill junction. The railway was primarily built to provide faster transport of raw materials, finished goods, and passengers between the Port of Liverpool and the cotton mills and factories of Manchester and surrounding towns.

The Sassi–Superga tramway is a steep grade railway line in the city of Turin in northern Italy. Managed by Gruppo Torinese Trasporti, it connects the Turin suburb of Sassi to the Basilica of Superga at an altitude of 672 m (2,205 ft). The lower station is situated at an altitude of 225 m (738 ft) a.s.l., the upper at 650 m (2,130 ft). From here, high in the hills facing the city across the River Po, a panorama of Turin is visible against a backdrop of the Alps. Intermediate stops (only on demand) are located at Prima Galleria, Raddoppio, and Pian Gambino.

The line was opened on 27 April 1884 as a cable driven rack railway of the Agudio system. In this system cables ran along the side of the track and passed around two large pulleys on each side of the cars, which in turn drove the cog wheels that propelled the train consisting of the driven car (only occupied by the driver and a brakeman) and up to three passenger cars. The cable was originally driven by a steam engine in the upper station, from 1922 on by an electric motor. During World War I passenger numbers dropped sharply, so that the line was temporarily shut down until 1919.

An inclined plane is a type of boat lift cable railway used on some canals for raising boats between different water levels. Boats may be conveyed afloat, in caissons, or may be carried in cradles or slings.

A funicular (/fjuːˈnɪkjʊlər, f(j)ʊ-, f(j)ə-/ few-NIK-yoo-lər, f(y)uu-, f(j)ə-), or funicular railway, is a type of cable railway system that connects points along a railway track laid on a steep slope. The system is characterized by two counterbalanced carriages (also called cars or trains) permanently attached to opposite ends of a haulage cable, which is looped over a pulley at the upper end of the track. The result of such a configuration is that the two carriages move synchronously: as one ascends, the other descends at an equal speed. This feature distinguishes funiculars from inclined elevators, which have a single car that is hauled uphill.

The term funicular derives from the Latin word funiculus, the diminutive of funis, meaning 'rope'.

A cable car (usually known as a cable tram outside North America) is a type of cable railway used for mass transit in which rail cars are hauled by a continuously moving cable running at a constant speed. Individual cars stop and start by releasing and gripping this cable as required. Cable cars are distinct from funiculars, where the cars are permanently attached to the cable.

Line C (Ligne C) of the Lyon Metro is the modern incarnation of the Funiculaire Croix-Rousse – Croix-Paquet (Croix-Rousse – Croix-Paquet Funicular), an old cable-hauled railway operating on part of the current alignment.