Brig in the context of Sailing craft

A sailing ship is a sea-going vessel that uses sails mounted on masts to harness the power of wind and propel the vessel. There is a variety of sail plans that propel sailing ships, employing square-rigged or fore-and-aft sails. Some ships carry square sails on each mast—the brig and full-rigged ship, said to be "ship-rigged" when there are three or more masts. Others carry only fore-and-aft sails on each mast, for instance some schooners. Still others employ a combination of square and fore-and-aft sails, including the barque, barquentine, and brigantine.

Early sailing ships were used for river and coastal waters in ancient Egypt and the Mediterranean. The Austronesian peoples developed maritime technologies that included the fore-and-aft crab-claw sail and with catamaran and outrigger hull configurations, which enabled the Austronesian expansion into the islands of the Indo-Pacific. This expansion originated in Taiwan c. 3000 BC and propagated through Island Southeast Asia, reaching Near Oceania c. 1500 BC, Hawaii c. 900 AD, and New Zealand c. 1200 AD. The maritime trading network in the Indo-Pacific dates from at least 1500 BC. Later developments in Asia produced the junk and dhow—vessels that incorporated features unknown in Europe at the time.

In "Jackspeak" (Royal Navy slang), it also refers to the dress uniform of Junior Ratings.

A sail plan is a drawing of a sailing craft, viewed from the side, depicting its sails, the spars that carry them and some of the rigging that supports the rig. By extension, "sail plan" describes the arrangement of sails on a craft. A sailing craft may be waterborne (a ship or boat), an iceboat, or a sail-powered land vehicle.

Enderby Land is a projecting landmass of Antarctica. Its shore extends from Shinnan Glacier at about 67°55′S 44°38′E / 67.917°S 44.633°E / -67.917; 44.633 to William Scoresby Bay at 67°24′S 59°34′E / 67.400°S 59.567°E / -67.400; 59.567, approximately 1⁄24 of the earth's longitude. It was first documented in western and eastern literature in February 1831 by John Biscoe aboard the whaling brig Tula, and named after the Enderby Brothers of London, the ship's owners who encouraged their captains to combine exploration with sealing.

A clipper was a type of mid-19th-century merchant sailing vessel, designed for speed. The term was also retrospectively applied to the Baltimore clipper, which originated in the late 18th century.

Clippers were generally narrow for their length, small by later 19th-century standards, could carry limited bulk freight, and had a large total sail area. "Clipper" does not refer to a specific sailplan; clippers may be schooners, brigs, brigantines, etc., as well as full-rigged ships. Clippers were mostly constructed in British and American shipyards, although France, Brazil, the Netherlands, and other nations also produced some. Clippers sailed all over the world, primarily on the trade routes between the United Kingdom and China, in transatlantic trade, and on the New York-to-San Francisco route around Cape Horn during the California gold rush. Dutch clippers were built beginning in the 1850s for the tea trade and passenger service to Java.

Robert Jenkins (fl. 1730s – c. 1740s) was a Welsh master mariner from Llanelli, famous as the protagonist of the "Jenkins's ear" incident, which became a contributory cause of the War of Jenkins' Ear between the Kingdom of Great Britain and the Kingdom of Spain in 1739.

Returning home from a trading voyage in the West Indies in command of the smuggling brig Rebecca in April 1731, Jenkins' ship was stopped and boarded by the Spanish guarda-costa or privateer La Isabela on suspicion of smuggling. According to some accounts, her commander, Juan de León Fandiño, had Jenkins bound to a mast, then sliced off his left ear with his sword and allegedly told him to say to his King "the same will happen to him (the king) if caught doing the same". Another account, in the Pennsylvania Gazette for 7 October 1731, attributes the assault to the Spanish lieutenant Dorce, who "took hold of his left Ear, and with his Cutlass slit it down; and then another of the Spaniards took hold of it and tore it off, but gave him the Piece of his Ear again, bidding him carry it to his Majesty King George".

A collier is a bulk cargo ship designed or used to carry coal. Early evidence of coal being transported by sea includes use of coal in London in 1306. In the fourteenth and fifteenth centuries, coal was shipped from the River Tyne to London and other destinations. Other ports also exported coal – for instance the Old Quay in Whitehaven harbour was built in 1634 for the loading of coal. London became highly reliant on the delivery of coal by sea – Samuel Pepys expressed concern in the winter of 1666–67 that war with the Dutch would prevent a fleet of 200 colliers getting through. In 1795, 4,395 cargoes of coal were delivered to London. By 1824, this number had risen to about 7,000; by 1839, it was over 9,000. The trade continued to the end of the twentieth century, with the last cargo of coal leaving the Port of Tyne in February, 2021.

The earliest type of collier on which there is detailed information is the Whitby-built cat. These were bluff-bowed, round-sterned, strongly-built ships that were in common use from the ports of Northeast England in the second half of the eighteenth century. Examples were used as research and exploration ships by the Royal Navy – the best known being HMS Endeavour. In the first half of the nineteenth century, collier brigs were the most common type and remained popular with Northeast coast shipowners. Elsewhere, sailing competition in the latter part of the century was from schooners and other vessels with fore and aft rig.The first steam collier, John Bowes, was launched in 1852 and proved successful, with many others being built as a result. Sailing and steam colliers co-existed for the remainder of the nineteenth century and into the twentieth, with coal being carried by sailing vessels at the time of the First World War.

A ship replica is a reconstruction of a no longer existing ship. Replicas can range from authentically reconstructed, fully seaworthy ships, to ships of modern construction that give an impression of a historic vessel. Some replicas may not even be seaworthy, but built for other educational or entertainment purposes.

Reasons to build a replica include historic research into shipbuilding, national pride, exposition at a museum or entertainment (e.g., for a TV series), and/or education programs for the unemployed. For example, see the project to build a replica of the Continental brig Andrew Doria. Apart from building a genuine replica of the ship, sometimes the construction materials, tools and methods can also copied from the ships' original era, as is the case with the replica of Batavia in Lelystad and the ship of the line replica Delft in Rotterdam (Delfshaven).

The Battle of Pulo Aura was a minor naval engagement of the Napoleonic Wars fought on 14 February 1804, in which a large British East India Company (EIC) convoy intimidated, drove off and chased away a powerful French Navy squadron. Although the French squadron was much stronger than the British convoy, Commodore Nathaniel Dance's aggressive tactics persuaded Counter-admiral Charles-Alexandre Léon Durand Linois to retire after only a brief exchange of fire. Dance then chased the French squadron until his convoy was out of danger, whereupon he resumed his passage toward British India.

The battle occurred during an extended commerce raiding operation by Linois' squadron, led by the ship of the line Marengo. In 1803, before war broke out, Linois sailed to the Indian Ocean to install garrisons in French and Batavian colonies and target British merchantmen. A prime target was the "China Fleet," a convoy of East Indiamen carrying millions of pounds' worth of trade goods. Although escorted by smaller merchant ships, the only available escort warship was the EIC armed brig Ganges. Dutch informants told Linois of the fleet’s destination and date of departure from Canton while he was at Batavia, and he set sail on 28 December 1803, eventually locating the convoy in early February.

A gun-brig was a small brig-rigged warship that enjoyed popularity in the Royal Navy during the Napoleonic Wars, during which large numbers were purchased or built. In general these were vessels of under 200 tons burthen, and thus smaller than the more common Cherokee-class brig-sloops or the even larger Cruizer-class brig-sloops. The gun-brigs generally carried 12 guns, comprising two long guns in the chase position and ten carronades on the broadsides.

For brig-rigged sloops, see List of corvette and sloop classes of the Royal Navy. For gunboats, see List of gunboat and gunvessel classes of the Royal Navy.