Bridge (instrument) in the context of Vibration

A soundboard (or sounding board) is the surface of a string instrument that the strings vibrate against, usually via some sort of bridge. Depending on the instrument, it is also called a top, top plate, resonator, table, sound-table, or belly. It is usually made of a softwood, often spruce.

Pianos, guitars, banjos, and many other stringed instruments incorporate soundboards. The resonant properties of the soundboard and the interior of the instrument greatly increase the loudness of the vibrating strings. "The sound board is probably the most important element of a guitar in terms of its influence on the quality of the instrument's tone [timbre]."

A fretless guitar is a guitar with a fingerboard without frets, typically a standard instrument that has had the frets removed, though some custom-built and commercial fretless guitars are occasionally made. The classic fretless guitar was first pioneered in 1976 by Turkish musician Erkan Oğur. Fretless bass guitars are readily available, with most major guitar manufacturers producing fretless models.

On the fretless guitar, the performer's fingers press the string directly against the fingerboard, as with a violin, resulting in a vibrating string that extends from the bridge (where the strings are attached) to the fingertip instead of to a fret.

A resonator guitar or resophonic guitar (often generically called a "Dobro") is an acoustic guitar that produces sound by conducting string vibrations through the bridge to one or more spun metal cones (resonators), instead of to the guitar's sounding board (top). Resonator guitars were originally designed to be louder than regular acoustic guitars, which were overwhelmed by horns and percussion instruments in dance orchestras. They became prized for their distinctive tone, and found life with bluegrass music and the blues well after electric amplification solved the problem of inadequate volume.

A violin consists of a body or corpus, a neck, a finger board, a bridge, a soundpost, four strings, and various fittings. The fittings are the tuning pegs, tailpiece and tailgut, endpin, possibly one or more fine tuners on the tailpiece, and in the modern style of playing, usually a chinrest, either attached with the cup directly over the tailpiece or to the left of it. There are many variations of chinrests: center-mount types such as Flesch or Guarneri, clamped to the body on both sides of the tailpiece, and side-mount types clamped to the lower bout to the left of the tailpiece.

The fingerboard (also known as a fretboard on fretted instruments) is an important component of most stringed instruments. It is a thin, long strip of material, usually wood, that is laminated to the front of the neck of an instrument. The strings run over the fingerboard, between the nut and bridge. To play the instrument, a musician presses strings down to the fingerboard to change the vibrating length, changing the pitch. This is called stopping the strings. Depending on the instrument and the style of music, the musician may pluck, strum or bow one or more strings with the hand that is not fretting the notes. On some instruments, notes can be sounded by the fretting hand alone, such as with hammer ons, an electric guitar technique.

The word "fingerboard" in other languages sometimes occurs in musical directions. In particular, the direction sul tasto (Ital., also sulla tastiera, Fr. sur la touche, G. am Griffbrett) for bowed string instruments to play with the bow above the fingerboard. This reduces the prominence of upper harmonics, giving a more ethereal tone.

A nut, on a stringed musical instrument, is a small piece of hard material that supports the strings at the end closest to the headstock or scroll. The nut marks one end of the vibrating length of each open string, sets the spacing of the strings across the neck, and usually holds the strings at the proper height from the fingerboard. Along with the bridge, the nut defines the scale lengths (vibrating length) of the open strings.

The nut may be made of ebony, ivory, cow bone, brass, Corian, Tusq or plastic, and is usually notched or grooved for the strings. The grooves are designed to lead the string from the fingerboard to the headstock or pegbox in a smooth curve, to prevent damage to the strings or their windings. Bowed string instruments in particular benefit from an application of soft pencil graphite in the notches of the nut, to preserve the delicate flat windings of their strings.

A monochord, also known as sonometer (see below), is an ancient musical and scientific laboratory instrument, involving one (mono-) string (chord). The term monochord is sometimes used as the class-name for any musical stringed instrument having only one string and a stick shaped body, also known as musical bows. According to the Hornbostel–Sachs system, string bows are bar zithers (311.1) while monochords are traditionally board zithers (314). The "harmonical canon", or monochord is, at its least, "merely a string having a board under it of exactly the same length, upon which may be delineated the points at which the string must be stopped to give certain notes," allowing comparison.

A string is fixed at both ends and stretched over a sound box. One or more movable bridges are then manipulated to demonstrate mathematical relationships among the frequencies produced. "With its single string, movable bridge and graduated rule, the monochord (kanōn [Greek: law]) straddled the gap between notes and numbers, intervals and ratios, sense-perception and mathematical reason." However, "music, mathematics, and astronomy were [also] inexorably linked in the monochord." As a pedagogical tool for demonstrating mathematical relationships between intervals, the monochord remained in use throughout the Middle Ages.

The scale length of a string instrument is the maximum vibrating length of the strings that produce sound, and determines the range of tones that string can produce at a given tension. It is also called string length. On instruments in which strings are not "stopped" (typically by frets or the player's fingers) or divided in length (such as in the piano), it is the actual length of string between the nut and the bridge.

String instruments produce sound through the vibration of their strings. The range of tones these strings can produce is determined by three primary factors: the linear density of the string, that is its mass per unit length (which is determined by its thickness and the density of the material), the tension placed upon it, and the instrument's scale length.

The guqin ([kùtɕʰǐn] ; Chinese: 古琴) is a plucked seven-string Chinese musical instrument. It has been played since ancient times, and has traditionally been favoured by scholars and literati as an instrument of great subtlety and refinement, as highlighted by the quote "a gentleman does not part with his qin or se without good reason," as well as being associated with the ancient Chinese philosopher Confucius. It is sometimes referred to by the Chinese as "the father of Chinese music" or "the instrument of the sages". The guqin is not to be confused with the guzheng, another Chinese long stringed instrument also without frets, but with moveable bridges under each string.

Traditionally, the instrument was simply referred to as the "qin" (琴) but by the twentieth century the term had come to be applied to many other musical instruments as well: the yangqin hammered dulcimer, the huqin family of bowed string instruments, and the Western piano (gangqin (钢琴)) and violin (xiaotiqin (小提琴)) are examples of this usage. The prefix "gu-" (古; meaning "ancient") was later added for clarification. Thus, the instrument is called "guqin" today. It can also be called qixian-qin (七絃琴; lit. "seven-stringed qin"). Because Robert Hans van Gulik's book about the qin is called The Lore of the Chinese Lute, the guqin is sometimes inaccurately called a lute. Other incorrect classifications, mainly from music compact discs, include "harp" or "table-harp".

A vibrato system on a guitar is a mechanical device used to temporarily change the pitch of the strings. It adds vibrato to the sound by changing the tension of the strings, typically at the bridge or tailpiece of an electric guitar using a controlling lever, which is alternately referred to as a whammy bar, vibrato bar, or tremolo arm. The lever enables the player to quickly and temporarily vary the tension and sometimes length of the strings, changing the pitch to create a vibrato, portamento, or pitch bend effect. Instruments without a vibrato have other bridge and tailpiece systems.

The pitch-bending effects have become an important part of many styles, allowing creation of sounds that could not be played without the device, such as the 1980s-era shred guitar "dive bomb" effect.

Lloyd Allayre Loar (1886–1943) was an American musician, instrument designer and sound engineer. He is best known for his design work with the Gibson Mandolin-Guitar Mfg. Co. Ltd. in the early 20th century, including the F-5 model mandolin and L-5 guitar. In his later years he worked on electric amplification of stringed instruments, and demonstrated them around the country. One example, played in public in 1938 was an electric viola that used electric coils beneath the bridge, with no back, able to "drown out the loudest trumpet."

In 1898 Orville Gibson had patented a new kind of mandolin that followed violin design, with its curved top and bottom carved into shape, rather than pressed. The sides too were carved out of a single block of wood, rather than being made of bent wood strips. The instruments were already unique before Lloyd Loar came to work for Gibson. However, it is the Loar-designed instruments that became especially desirable. First made famous by Bill Monroe, Loar's signed mandolins today can cost as much as $200,000. The L-5 guitar owned by Maybelle Carter, which was made after he left Gibson, sold for $575,000.

The Streichmelodion or Breitoline is a bowed zither, similar in shape to a viola, it's essentially a type of Fretted Violin. The Streichmelodion was created in 1856 by Leopold Breit in Brno, evolving from the alpine zither and inspired by the Streichzither [de]. The Breitoline is described as having a richer, more robust tone than the Streichzither, and has a compass slightly lower than that of a viola. Breitolines are played with the body of the instrument resting on the player's lap (hence the name "lap harp"), with the part of the zither between the neck and headstock resting on a table. Many Streichmelodions were produced in Markneukirchen at the Ernst Rudolph Glier factory during the 19th century.

The instrument has a bridge, with its ribs having a steep curve, similar to those of the viol de gamba. The instrument has a curved fingerboard with around 29 frets, with fretboard markers inlaid at the fifth, ninth, 12th, and 25th frets. Like most classical string instruments, it has two F Holes. The pegboxes were asymmetrical, leaning to the left. Most models of the instrument have four strings, although Breit's original version had five. Streichzithers came in various different sizes, including viola, cello and bass, although tunings for each are disputed. The strings are usually tuned according to traditional alpine zither tuning, reverse to that of a violin. This is most commonly e" a’ d’ g.

The koto (箏 or 琴) is a Japanese plucked half-tube zither instrument, and the national instrument of Japan. It is derived from the Chinese zheng and se, and similar to the Mongolian yatga, the Korean gayageum and ajaeng, the Vietnamese đàn tranh, the Sundanese kacapi and the Kazakh jetigen. Koto are roughly 180 centimetres (6 ft) in length, and made from Paulownia wood (Paulownia tomentosa, known as kiri). The most common type uses 13 strings strung over movable bridges used for tuning, different pieces possibly requiring different tuning. Seventeen-string koto are also common, and act as bass in ensembles. Koto strings are generally plucked using three fingerpicks (tsume), worn on the first three fingers of the right hand.