Air traffic control in the context of "S band"

An airport is an aerodrome with extended facilities, mostly for commercial air transport. They usually consist of a landing area, which comprises an aerially accessible open space including at least one operationally active surface such as a runway for a plane to take off and to land or a helipad, and often includes adjacent utility buildings such as control towers, hangars and terminals, to maintain and monitor aircraft. Larger airports may have airport aprons, taxiway bridges, air traffic control centres, passenger facilities such as restaurants and lounges, and emergency services. In some countries, the US in particular, airports also typically have one or more fixed-base operators, serving general aviation.

Airport operations are extremely complex, with a complicated system of aircraft support services, passenger services, and aircraft control services contained within the operation. Thus airports can be major employers, as well as important hubs for tourism and other kinds of transit. Because they are sites of operation for heavy machinery, a number of regulations and safety measures have been implemented in airports, in order to reduce hazards. Additionally, airports have major local environmental impacts, as both large sources of air pollution, noise pollution and other environmental impacts, making them sites that acutely experience the environmental effects of aviation. Airports are also vulnerable infrastructure to extreme weather, climate change caused sea level rise and other disasters.

The ICAO airport code or location indicator is a four-letter code designating aerodromes around the world. These codes, as defined by the International Civil Aviation Organization and published quarterly in ICAO Document 7910: Location Indicators, are used by air traffic control and airline operations such as flight planning.ICAO codes are also used to identify other aviation facilities such as weather stations, international flight service stations, or area control centers (and by extension their flight information regions), regardless of whether they are located at airports.

A dot matrix is a 2-dimensional patterned array, used to represent characters, symbols and images. Most types of modern technology use dot matrices for display of information, including mobile phones, televisions, and printers. The system is also used in textiles with sewing, knitting and weaving.

An alternate form of information display using lines and curves is known as a vector display, was used with early computing devices such as air traffic control radar displays and pen-based plotters but is no longer used. Electronic vector displays were typically monochrome only, and either leave the interiors of closed vector shapes unfilled, or perform slow, time-consuming and often non-uniform shape-filling, as on pen-based plotters.

King Khalid International Airport (Arabic: مطار الملك خالد الدولي, romanized: Maṭār al-Malik Khālid al-Duwaliyy; IATA: RUH, ICAO: OERK) is an international airport located about 35 kilometres (22 mi) north of Riyadh, Saudi Arabia. This airport consists of five passenger terminals with eight aero-bridges each, a mosque, and parking facilities for 11,600 vehicles. It includes a "Royal Terminal" designated for use by government officials, state guests, and the Saudi royal family. The airport has one of the world's tallest air traffic control towers, and two parallel runways, each 4,260 metres (13,980 ft) in length. It is one of the busiest airports in the Middle East. The airport is owned and operated by the state-owned Riyadh Airports Company.

The Royal Mosque was designed with a significant programme of integral art; the stained glass, by British architectural artist Brian Clarke, was a landmark work in the history of the medium, considered to be the largest and technically most advanced stained glass project of the modern period.

Airspace is the portion of the atmosphere controlled by a country above its territory and territorial waters that fall under the country's sovereignty and regulatory control.

Internationally, allocation and management of airspace is coordinated by the International Civil Aviation Organization (ICAO), which was established through the Chicago Convention in 1947 to unify air traffic. ICAO organizes airspace into Flight Information Regions (FIRs) and provides classification guidelines. National authorities, such as the FAA, CAA, or EASA implement rules and regulations for air traffic control, special-use airspace, and enforcement within their own FIRs.

In air traffic control, an area control center (ACC), also known as a center or en-route center, is a facility responsible for controlling aircraft flying in the airspace of a given flight information region (FIR) at high altitudes between airport approaches and departures. In the US, such a center is referred to as an air route traffic control center (ARTCC).

A center typically accepts traffic from—and ultimately passes traffic to—the control of a terminal control center or another center. Most centers are operated by the national governments of the countries in which they are located. The general operations of centers worldwide, and the boundaries of the airspace each center controls, are governed by the International Civil Aviation Organization (ICAO).

In aviation, an intersection is a virtual navigational fix that helps aircraft maintain their flight plan. It is usually defined as the intersection (in the geometrical sense) of two VOR (VHF Omnidirectional Range) radials. They are usually identified as major airway intersections where aircraft, operating under instrument flight rules, often change direction of flight while en route. According to the Federal Aviation Regulations, some intersections are designated as mandatory reporting points for pilots who are not in radar contact with air traffic control.

Intersections also play an important role in departure and approach procedures. All intersections have an alphabetical or alphanumeric designation. Near major airports, the intersection designation code typically consists of three letters followed by the runway number. Most other intersection designations consist of five-letter combinations that are either pronounceable or chosen for their mnemonic value, since either air traffic control or the flight plan may require the pilot to announce the designation. In the terminal procedure or approach plate example to the right, note that two of the intersections are called DONUT and KOFFE. Many intersections are named because of local points of interest. In the case of Carroll County Airport, there is a popular diner located on the field to which many pilots fly.

The airport apron, apron, flight line, or ramp is the area of an airport where aircraft are parked, unloaded or loaded, refueled, boarded, or maintained. Although the use of the apron is covered by regulations, such as lighting on vehicles, it is typically more accessible to users than the runway or taxiway. However, the apron is not usually open to the general public, and a permit may be required to gain access. An apron's designated areas for aircraft parking are called aircraft stands.

By extension, the term apron is also used to identify the air traffic control (ATC) position responsible for coordinating movement on this surface at busier airports. When the aerodrome control tower does not have control over the apron, the use of the apron may be controlled by an apron management service (also known as apron control or apron advisory) to provide coordination between the users. Apron control allocates aircraft parking stands (gates) and communicates this information to tower or ground control and to airline handling agents; it also authorises vehicle movements where they could conflict with taxiing aircraft such as outside of painted road markings. The authority responsible for the aprons is also responsible for relaying to ATC information about the apron conditions such as water, snow, construction or maintenance works on or adjacent to the apron, temporary hazards such as birds or parked vehicles, systems failure etc. Procedures should be established for a coordinated information provision between the aircraft, vehicle, apron control unit and ATC to facilitate the orderly transition of aircraft between the apron management unit and the aerodrome control tower.

Turkish Airports Authority or legally General Directorate of State Airports Authority (Turkish: Devlet Hava Meydanları İşletmesi Genel Müdürlüğü; DHMİ), is the Turkish government authority responsible for the functioning of airports in Turkey and the regulation and monitoring of air traffic control in Turkish airspace. It is associated with the Turkish Ministry of Transport and Infrastructure and is a member of ICAO, EUROCONTROL, and ACI Europe.

The authority operates most airports in Turkey, with the notable examples being Istanbul Airport, Antalya Airport, İzmir Adnan Menderes Airport, Milas–Bodrum Airport and Çukurova Airport.